#include <serial.h>
#include <xyzModem.h>
#include <asm/cache.h>
+#include <asm/global_data.h>
#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == '\r')
+ if (getchar() == '\r')
break;
}
}
*/
for (i=0; i<100; ++i) {
if (tstc()) {
- (void) getc();
+ getchar();
}
udelay(1000);
}
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == 0x1B) /* ESC */
+ if (getchar() == 0x1B) /* ESC */
break;
}
}
--len; /* always leave room for terminating '\0' byte */
for (p=buf; p < buf+len; ++p) {
- c = getc(); /* read character */
+ c = getchar(); /* read character */
if (do_echo)
putc(c); /* ... and echo it */
*p = c;
}
- /* Check for the console hangup (if any different from serial) */
- if (gd->jt->getc != getc) {
- if (ctrlc()) {
- return (-1);
+ /* Check for the console hangup (if any different from serial) */
+ if (gd->jt->getc != getchar) {
+ if (ctrlc())
+ return (-1);
}
- }
}
/* line too long - truncate */
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == '\r')
+ if (getchar() == '\r')
break;
}
}
printf("## Ready for S-Record upload, press ENTER to proceed ...\n");
for (;;) {
- if (getc() == '\r')
+ if (getchar() == '\r')
break;
}
if (save_serial(offset, size)) {
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == 0x1B) /* ESC */
+ if (getchar() == 0x1B) /* ESC */
break;
}
}
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == '\r')
+ if (getchar() == '\r')
break;
}
}
serial_setbrg();
udelay(50000);
for (;;) {
- if (getc() == 0x1B) /* ESC */
+ if (getchar() == 0x1B) /* ESC */
break;
}
}
*/
for (i=0; i<100; ++i) {
if (tstc()) {
- (void) getc();
+ getchar();
}
udelay(1000);
}
/* get a packet */
/* wait for the starting character or ^C */
for (;;) {
- switch (getc ()) {
+ switch (getchar()) {
case START_CHAR: /* start packet */
goto START;
case ETX_CHAR: /* ^C waiting for packet */
START:
/* get length of packet */
sum = 0;
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
length = untochar(new_char);
/* get sequence number */
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
/* END NEW CODE */
/* get packet type */
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
if (length == -2) {
/* (length byte was 0, decremented twice) */
/* get the two length bytes */
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
len_hi = untochar(new_char);
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
len_lo = untochar(new_char);
length = len_hi * 95 + len_lo;
/* check header checksum */
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
}
/* bring in rest of packet */
while (length > 1) {
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
sum += new_char & 0xff;
}
}
/* get and validate checksum character */
- new_char = getc();
+ new_char = getchar();
if ((new_char & 0xE0) == 0)
goto packet_error;
if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
goto packet_error;
/* get END_CHAR */
- new_char = getc();
+ new_char = getchar();
if (new_char != END_CHAR) {
packet_error:
/* restore state machines */
static int getcxmodem(void) {
if (tstc())
- return (getc());
+ return (getchar());
return -1;
}
static ulong load_serial_ymodem(ulong offset, int mode)
U_BOOT_CMD(
loadb, 3, 0, do_load_serial_bin,
"load binary file over serial line (kermit mode)",
- "[ off ] [ baud ]\n"
+ "[ addr [ baud ] ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'"
+ " at address 'addr' with baudrate 'baud'"
);
U_BOOT_CMD(
loadx, 3, 0, do_load_serial_bin,
"load binary file over serial line (xmodem mode)",
- "[ off ] [ baud ]\n"
+ "[ addr [ baud ] ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'"
+ " at address 'addr' with baudrate 'baud'"
);
U_BOOT_CMD(
loady, 3, 0, do_load_serial_bin,
"load binary file over serial line (ymodem mode)",
- "[ off ] [ baud ]\n"
+ "[ addr [ baud ] ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'"
+ " at address 'addr' with baudrate 'baud'"
);
#endif /* CONFIG_CMD_LOADB */