This string is displayed in the command line to the left of the
cursor.
+config SYS_PROMPT_HUSH_PS2
+ string "Hush shell secondary prompt"
+ depends on HUSH_PARSER
+ default "> "
+ help
+ This defines the secondary prompt string, which is
+ printed when the command interpreter needs more input
+ to complete a command. Usually "> ".
+
config SYS_XTRACE
- string "Command execution tracer"
+ bool "Command execution tracer"
depends on CMDLINE
default y if CMDLINE
help
config CMD_ACPI
bool "acpi"
- default y if ACPIGEN
+ depends on ACPIGEN
+ default y
help
List and dump ACPI tables. ACPI (Advanced Configuration and Power
Interface) is used mostly on x86 for providing information to the
between the firmware and OS, and is particularly useful when you
want to make hardware changes without the OS needing to be adjusted.
+config CMD_ADDRMAP
+ bool "addrmap"
+ depends on ADDR_MAP
+ default y
+ help
+ List non-identity virtual-physical memory mappings for 32-bit CPUs.
+
config CMD_BDI
bool "bdinfo"
default y
config CMD_CPU
bool "cpu"
+ depends on CPU
help
Print information about available CPUs. This normally shows the
number of CPUs, type (e.g. manufacturer, architecture, product or
help
Do FDT related setup before booting into the Operating System.
+config SUPPORT_EXTENSION_SCAN
+ bool
+
+config CMD_EXTENSION
+ bool "Extension board management command"
+ select CMD_FDT
+ depends on SUPPORT_EXTENSION_SCAN
+ help
+ Enables the "extension" command, which allows to detect
+ extension boards connected to the system, and apply
+ corresponding Device Tree overlays.
+
config CMD_GO
bool "go"
default y
help
GPIO support.
+config CMD_PWM
+ bool "pwm"
+ depends on DM_PWM
+ help
+ Control PWM channels, this allows invert/config/enable/disable PWM channels.
+
config CMD_GPT
bool "GPT (GUID Partition Table) command"
select EFI_PARTITION
Print list of available block device drivers, and for each, the list
of known block devices.
+config CMD_MBR
+ bool "MBR (Master Boot Record) command"
+ select DOS_PARTITION
+ select HAVE_BLOCK_DEVICE
+ help
+ Enable the 'mbr' command to ready and write MBR (Master Boot Record)
+ style partition tables.
+
+config CMD_MISC
+ bool "misc"
+ depends on MISC
+ help
+ Enable the command "misc" for accessing miscellaneous devices with
+ a MISC uclass driver. The command provides listing all MISC devices
+ as well as read and write functionalities via their drivers.
+
config CMD_MMC
bool "mmc"
+ depends on MMC
help
MMC memory mapped support.
initial flashing by external block device without network
or usb support.
+config CMD_OPTEE_RPMB
+ bool "Enable read/write support on RPMB via OPTEE"
+ depends on SUPPORT_EMMC_RPMB && OPTEE
+ help
+ Enable the commands for reading, writing persistent named values
+ in the Replay Protection Memory Block partition in eMMC by
+ using Persistent Objects in OPTEE
+
config CMD_MTD
bool "mtd"
depends on MTD
help
MTD commands support.
+config CMD_MUX
+ bool "mux"
+ depends on MULTIPLEXER
+ help
+ List, select, and deselect mux controllers on the fly.
+
config CMD_NAND
bool "nand"
default y if NAND_SUNXI
config CMD_PINMUX
bool "pinmux - show pins muxing"
+ depends on PINCTRL
default y if PINCTRL
help
Parse all available pin-controllers and show pins muxing. This
config CMD_USB
bool "usb"
+ depends on USB
select HAVE_BLOCK_DEVICE
help
USB support.
config CMD_VIRTIO
bool "virtio"
depends on VIRTIO
+ depends on HAVE_BLOCK_DEVICE
default y if VIRTIO
help
VirtIO block device support
config CMD_EXCEPTION
bool "exception - raise exception"
- depends on ARM || RISCV || X86
+ depends on ARM || RISCV || SANDBOX || X86
help
Enable the 'exception' command which allows to raise an exception.
help
Print bytes from the hardware random number generator.
-# TODO: rename to CMD_SLEEP
-config CMD_MISC
+config CMD_SLEEP
bool "sleep"
default y
help
The '-f' (force) option can be used for set the value which exceeds
the limits, which are found in device-tree and are kept in regulator's
- uclass platdata structure.
+ uclass plat structure.
endmenu
config CMD_BLOB
bool "Enable the 'blob' command"
+ depends on !MX6ULL && !MX6SLL && !MX6SL
+ select IMX_HAB if ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP || ARCH_IMX8M
help
This is used with the Freescale secure boot mechanism.
help
Add -v option to verify data against a hash.
+config CMD_SCP03
+ bool "scp03 - SCP03 enable and rotate/provision operations"
+ depends on SCP03
+ help
+ This command provides access to a Trusted Application
+ running in a TEE to request Secure Channel Protocol 03
+ (SCP03) enablement and/or rotation of its SCP03 keys.
+
config CMD_TPM_V1
bool
config CMD_TPM_V2
bool
- select CMD_LOG
config CMD_TPM
bool "Enable the 'tpm' command"
for some PowerPC processors. For details please see the
documentation in doc/README.bedbug.
+config CMD_CBSYSINFO
+ bool "cbsysinfo"
+ depends on X86
+ default y if SYS_COREBOOT
+ help
+ This provides information about the coreboot sysinfo table stored in
+ memory by coreboot before jumping to U-Boot. It can be useful for
+ debugging the beaaviour of coreboot or U-Boot.
+
config CMD_DIAG
bool "diag - Board diagnostics"
help
config CMD_LOG
bool "log - Generation, control and access to logging"
select LOG
+ select GETOPT
help
This provides access to logging features. It allows the output of
log data to be controlled to a limited extent (setting up the default
avb read_part_hex - read data from partition and output to stdout
avb write_part - write data to partition
avb verify - run full verification chain
+
+config CMD_STACKPROTECTOR_TEST
+ bool "Test command for stack protector"
+ depends on STACKPROTECTOR
+ help
+ Enable stackprot_test command
+ The stackprot_test command will force a stack overrun to test
+ the stack smashing detection mechanisms.
+
endmenu
config CMD_UBI