#include <mmc.h>
#include <net.h>
#include <pxe_utils.h>
+#include <linux/sizes.h>
#define EFI_DIRNAME "efi/boot/"
return 0;
}
-static int efiload_read_file(struct blk_desc *desc, struct bootflow *bflow)
+/**
+ * bootmeth_uses_network() - check if the media device is Ethernet
+ *
+ * @bflow: Bootflow to check
+ * Returns: true if the media device is Ethernet, else false
+ */
+static bool bootmeth_uses_network(struct bootflow *bflow)
+{
+ const struct udevice *media = dev_get_parent(bflow->dev);
+
+ return IS_ENABLED(CONFIG_CMD_DHCP) &&
+ device_get_uclass_id(media) == UCLASS_ETH;
+}
+
+static void set_efi_bootdev(struct blk_desc *desc, struct bootflow *bflow)
{
const struct udevice *media_dev;
int size = bflow->size;
char devnum_str[9];
char dirname[200];
char *last_slash;
- int ret;
-
- ret = bootmeth_alloc_file(bflow, 0x2000000, 0x10000);
- if (ret)
- return log_msg_ret("read", ret);
/*
* This is a horrible hack to tell EFI about this boot device. Once we
* this can go away.
*/
media_dev = dev_get_parent(bflow->dev);
- snprintf(devnum_str, sizeof(devnum_str), "%x", dev_seq(media_dev));
+ snprintf(devnum_str, sizeof(devnum_str), "%x:%x",
+ desc ? desc->devnum : dev_seq(media_dev),
+ bflow->part);
strlcpy(dirname, bflow->fname, sizeof(dirname));
last_slash = strrchr(dirname, '/');
dev_name = device_get_uclass_id(media_dev) == UCLASS_MASS_STORAGE ?
"usb" : dev_get_uclass_name(media_dev);
efi_set_bootdev(dev_name, devnum_str, bflow->fname, bflow->buf, size);
+}
+
+static int efiload_read_file(struct bootflow *bflow, ulong addr)
+{
+ struct blk_desc *desc = NULL;
+ loff_t bytes_read;
+ int ret;
+
+ if (bflow->blk)
+ desc = dev_get_uclass_plat(bflow->blk);
+ ret = bootmeth_setup_fs(bflow, desc);
+ if (ret)
+ return log_msg_ret("set", ret);
+
+ ret = fs_read(bflow->fname, addr, 0, bflow->size, &bytes_read);
+ if (ret)
+ return log_msg_ret("read", ret);
+ bflow->buf = map_sysmem(addr, bflow->size);
+
+ set_efi_bootdev(desc, bflow);
return 0;
}
return 0;
}
-static void distro_efi_get_fdt_name(char *fname, int size)
+/**
+ * distro_efi_get_fdt_name() - Get the filename for reading the .dtb file
+ *
+ * @fname: Place to put filename
+ * @size: Max size of filename
+ * @seq: Sequence number, to cycle through options (0=first)
+ * Returns: 0 on success, -ENOENT if the "fdtfile" env var does not exist,
+ * -EINVAL if there are no more options, -EALREADY if the control FDT should be
+ * used
+ */
+static int distro_efi_get_fdt_name(char *fname, int size, int seq)
{
const char *fdt_fname;
+ const char *prefix;
+
+ /* select the prefix */
+ switch (seq) {
+ case 0:
+ /* this is the default */
+ prefix = "/dtb";
+ break;
+ case 1:
+ prefix = "";
+ break;
+ case 2:
+ prefix = "/dtb/current";
+ break;
+ default:
+ return log_msg_ret("pref", -EINVAL);
+ }
fdt_fname = env_get("fdtfile");
if (fdt_fname) {
- snprintf(fname, size, "dtb/%s", fdt_fname);
+ snprintf(fname, size, "%s/%s", prefix, fdt_fname);
log_debug("Using device tree: %s\n", fname);
- } else {
+ } else if (IS_ENABLED(CONFIG_OF_HAS_PRIOR_STAGE)) {
+ strcpy(fname, "<prior>");
+ return log_msg_ret("pref", -EALREADY);
+ /* Use this fallback only for 32-bit ARM */
+ } else if (IS_ENABLED(CONFIG_ARM) && !IS_ENABLED(CONFIG_ARM64)) {
const char *soc = env_get("soc");
const char *board = env_get("board");
const char *boardver = env_get("boardver");
/* cf the code in label_boot() which seems very complex */
- snprintf(fname, size, "dtb/%s%s%s%s.dtb",
+ snprintf(fname, size, "%s/%s%s%s%s.dtb", prefix,
soc ? soc : "", soc ? "-" : "", board ? board : "",
boardver ? boardver : "");
log_debug("Using default device tree: %s\n", fname);
+ } else {
+ return log_msg_ret("env", -ENOENT);
}
+
+ return 0;
}
-static int distro_efi_read_bootflow_file(struct udevice *dev,
+/*
+ * distro_efi_try_bootflow_files() - Check that files are present
+ *
+ * This reads any FDT file and checks whether the bootflow file is present, for
+ * later reading. We avoid reading the bootflow now, since it is likely large,
+ * it may take a long time and we want to avoid needing to allocate memory for
+ * it
+ *
+ * @dev: bootmeth device to use
+ * @bflow: bootflow to update
+ */
+static int distro_efi_try_bootflow_files(struct udevice *dev,
struct bootflow *bflow)
{
struct blk_desc *desc = NULL;
ulong fdt_addr, size;
char fname[256];
- int ret;
+ int ret, seq;
/* We require a partition table */
if (!bflow->part)
if (ret)
return log_msg_ret("try", ret);
- ret = efiload_read_file(desc, bflow);
- if (ret)
- return log_msg_ret("read", -EINVAL);
-
- distro_efi_get_fdt_name(fname, sizeof(fname));
- bflow->fdt_fname = strdup(fname);
- if (!bflow->fdt_fname)
- return log_msg_ret("fil", -ENOMEM);
+ /* Since we can access the file, let's call it ready */
+ bflow->state = BOOTFLOWST_READY;
fdt_addr = env_get_hex("fdt_addr_r", 0);
- ret = bootmeth_common_read_file(dev, bflow, fname, fdt_addr, &size);
+
+ /* try the various available names */
+ ret = -ENOENT;
+ *fname = '\0';
+ for (seq = 0; ret == -ENOENT; seq++) {
+ ret = distro_efi_get_fdt_name(fname, sizeof(fname), seq);
+ if (ret == -EALREADY)
+ bflow->flags = BOOTFLOWF_USE_PRIOR_FDT;
+ if (!ret) {
+ /* Limit FDT files to 4MB */
+ size = SZ_4M;
+ ret = bootmeth_common_read_file(dev, bflow, fname,
+ fdt_addr, &size);
+ }
+ }
+
+ if (*fname) {
+ bflow->fdt_fname = strdup(fname);
+ if (!bflow->fdt_fname)
+ return log_msg_ret("fil", -ENOMEM);
+ }
+
if (!ret) {
bflow->fdt_size = size;
bflow->fdt_addr = fdt_addr;
*/
} else {
log_debug("No device tree available\n");
+ bflow->flags |= BOOTFLOWF_USE_BUILTIN_FDT;
}
return 0;
char file_addr[17], fname[256];
char *tftp_argv[] = {"tftp", file_addr, fname, NULL};
struct cmd_tbl cmdtp = {}; /* dummy */
- const char *addr_str, *fdt_addr_str;
+ const char *addr_str, *fdt_addr_str, *bootfile_name;
int ret, arch, size;
ulong addr, fdt_addr;
char str[36];
ret = env_set("bootp_vci", str);
if (ret)
return log_msg_ret("vcs", ret);
- ret = env_set_ulong("bootp_arch", arch);
+ ret = env_set_hex("bootp_arch", arch);
if (ret)
return log_msg_ret("ars", ret);
return log_msg_ret("sz", -EINVAL);
bflow->size = size;
+ /* bootfile should be setup by dhcp*/
+ bootfile_name = env_get("bootfile");
+ if (!bootfile_name)
+ return log_msg_ret("bootfile_name", ret);
+ bflow->fname = strdup(bootfile_name);
+
/* do the hideous EFI hack */
efi_set_bootdev("Net", "", bflow->fname, map_sysmem(addr, 0),
bflow->size);
fdt_addr = hextoul(fdt_addr_str, NULL);
sprintf(file_addr, "%lx", fdt_addr);
- distro_efi_get_fdt_name(fname, sizeof(fname));
+ /* We only allow the first prefix with PXE */
+ ret = distro_efi_get_fdt_name(fname, sizeof(fname), 0);
+ if (ret)
+ return log_msg_ret("nam", ret);
+
bflow->fdt_fname = strdup(fname);
if (!bflow->fdt_fname)
return log_msg_ret("fil", -ENOMEM);
bflow->fdt_addr = fdt_addr;
} else {
log_debug("No device tree available\n");
+ bflow->flags |= BOOTFLOWF_USE_BUILTIN_FDT;
}
bflow->state = BOOTFLOWST_READY;
static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow)
{
- const struct udevice *media = dev_get_parent(bflow->dev);
int ret;
- if (IS_ENABLED(CONFIG_CMD_DHCP) &&
- device_get_uclass_id(media) == UCLASS_ETH) {
+ /*
+ * bootmeth_efi doesn't allocate any buffer neither for blk nor net device
+ * set flag to avoid freeing static buffer.
+ */
+ bflow->flags |= BOOTFLOWF_STATIC_BUF;
+
+ if (bootmeth_uses_network(bflow)) {
/* we only support reading from one device, so ignore 'dev' */
ret = distro_efi_read_bootflow_net(bflow);
if (ret)
return log_msg_ret("net", ret);
} else {
- ret = distro_efi_read_bootflow_file(dev, bflow);
+ ret = distro_efi_try_bootflow_files(dev, bflow);
if (ret)
return log_msg_ret("blk", ret);
}
return 0;
}
-int distro_efi_boot(struct udevice *dev, struct bootflow *bflow)
+static int distro_efi_boot(struct udevice *dev, struct bootflow *bflow)
{
ulong kernel, fdt;
- char cmd[50];
+ int ret;
- /* A non-zero buffer indicates the kernel is there */
- if (bflow->buf) {
- kernel = (ulong)map_to_sysmem(bflow->buf);
+ kernel = env_get_hex("kernel_addr_r", 0);
+ if (!bootmeth_uses_network(bflow)) {
+ ret = efiload_read_file(bflow, kernel);
+ if (ret)
+ return log_msg_ret("read", ret);
/*
- * use the provided device tree if available, else fall back to
- * the control FDT
+ * use the provided device tree if not using the built-in fdt
*/
- if (bflow->fdt_fname)
+ if (bflow->flags & ~BOOTFLOWF_USE_BUILTIN_FDT)
fdt = bflow->fdt_addr;
- else
- fdt = (ulong)map_to_sysmem(gd->fdt_blob);
+
} else {
/*
* This doesn't actually work for network devices:
* But this is the same behaviour for distro boot, so it can be
* fixed here.
*/
- kernel = env_get_hex("kernel_addr_r", 0);
fdt = env_get_hex("fdt_addr_r", 0);
}
- /*
- * At some point we can add a real interface to bootefi so we can call
- * this directly. For now, go through the CLI, like distro boot.
- */
- snprintf(cmd, sizeof(cmd), "bootefi %lx %lx", kernel, fdt);
- if (run_command(cmd, 0))
- return log_msg_ret("run", -EINVAL);
+ if (bflow->flags & BOOTFLOWF_USE_BUILTIN_FDT) {
+ log_debug("Booting with built-in fdt\n");
+ if (efi_binary_run(map_sysmem(kernel, 0), bflow->size,
+ EFI_FDT_USE_INTERNAL))
+ return log_msg_ret("run", -EINVAL);
+ } else {
+ log_debug("Booting with external fdt\n");
+ if (efi_binary_run(map_sysmem(kernel, 0), bflow->size,
+ map_sysmem(fdt, 0)))
+ return log_msg_ret("run", -EINVAL);
+ }
return 0;
}
git.openpandora.org / pandora-u-boot.git / blobdiff