#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
+#include <asm/e820.h>
+
#include "pci.h"
-#define MMCONFIG_APER_SIZE (256*1024*1024)
+/* aperture is up to 256MB but BIOS may reserve less */
+#define MMCONFIG_APER_MIN (2 * 1024*1024)
+#define MMCONFIG_APER_MAX (256 * 1024*1024)
+
+/* Verify the first 16 busses. We assume that systems with more busses
+ get MCFG right. */
+#define MAX_CHECK_BUS 16
-static DECLARE_BITMAP(fallback_slots, 32);
+static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
{
char __iomem *addr;
- if (seg == 0 && bus == 0 && test_bit(PCI_SLOT(devfn), fallback_slots))
+ if (seg == 0 && bus < MAX_CHECK_BUS &&
+ test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
return NULL;
addr = get_virt(seg, bus);
if (!addr)
char __iomem *addr;
/* Why do we have this when nobody checks it. How about a BUG()!? -AK */
- if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095)))
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
+ *value = -1;
return -EINVAL;
+ }
addr = pci_dev_base(seg, bus, devfn);
if (!addr)
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
- and fallback for them.
- We only do this for bus 0/seg 0 */
+ and fallback for them. */
static __init void unreachable_devices(void)
{
+ int i, k;
+ /* Use the max bus number from ACPI here? */
+ for (k = 0; k < MAX_CHECK_BUS; k++) {
+ for (i = 0; i < 32; i++) {
+ u32 val1;
+ char __iomem *addr;
+
+ pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
+ if (val1 == 0xffffffff)
+ continue;
+ addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
+ if (addr == NULL|| readl(addr) != val1) {
+ set_bit(i + 32*k, fallback_slots);
+ printk(KERN_NOTICE "PCI: No mmconfig possible"
+ " on device %02x:%02x\n", k, i);
+ }
+ }
+ }
+}
+
+static __init void pci_mmcfg_insert_resources(void)
+{
+#define PCI_MMCFG_RESOURCE_NAME_LEN 19
int i;
- for (i = 0; i < 32; i++) {
- u32 val1;
- char __iomem *addr;
+ struct resource *res;
+ char *names;
+ unsigned num_buses;
- pci_conf1_read(0, 0, PCI_DEVFN(i,0), 0, 4, &val1);
- if (val1 == 0xffffffff)
- continue;
- addr = pci_dev_base(0, 0, PCI_DEVFN(i, 0));
- if (addr == NULL|| readl(addr) != val1) {
- set_bit(i, fallback_slots);
- }
+ res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
+ pci_mmcfg_config_num, GFP_KERNEL);
+
+ if (!res) {
+ printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
+ return;
+ }
+
+ names = (void *)&res[pci_mmcfg_config_num];
+ for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
+ num_buses = pci_mmcfg_config[i].end_bus_number -
+ pci_mmcfg_config[i].start_bus_number + 1;
+ res->name = names;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
+ pci_mmcfg_config[i].pci_segment_group_number);
+ res->start = pci_mmcfg_config[i].base_address;
+ res->end = res->start + (num_buses << 20) - 1;
+ res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ insert_resource(&iomem_resource, res);
+ names += PCI_MMCFG_RESOURCE_NAME_LEN;
}
}
-void __init pci_mmcfg_init(void)
+void __init pci_mmcfg_init(int type)
{
int i;
(pci_mmcfg_config[0].base_address == 0))
return;
- /* RED-PEN i386 doesn't do _nocache right now */
+ /* Only do this check when type 1 works. If it doesn't work
+ assume we run on a Mac and always use MCFG */
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
+ pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+ E820_RESERVED)) {
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
+ pci_mmcfg_config[0].base_address);
+ printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ return;
+ }
+
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk("PCI: Can not allocate memory for mmconfig structures\n");
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
- pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_SIZE);
+ pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+ MMCONFIG_APER_MAX);
if (!pci_mmcfg_virt[i].virt) {
printk("PCI: Cannot map mmconfig aperture for segment %d\n",
pci_mmcfg_config[i].pci_segment_group_number);
}
unreachable_devices();
+ pci_mmcfg_insert_resources();
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
git.openpandora.org / pandora-kernel.git / blobdiff