if (maxlvt >= 4)
apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
v = GET_APIC_VERSION(apic_read(APIC_LVR));
- if (APIC_INTEGRATED(v)) { /* !82489DX */
- if (maxlvt > 3) /* Due to Pentium errata 3AP and 11AP. */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- }
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
}
void __init connect_bsp_APIC(void)
}
}
-void disconnect_bsp_APIC(void)
+void disconnect_bsp_APIC(int virt_wire_setup)
{
if (pic_mode) {
/*
outb(0x70, 0x22);
outb(0x00, 0x23);
}
+ else {
+ /* Go back to Virtual Wire compatibility mode */
+ unsigned long value;
+
+ /* For the spurious interrupt use vector F, and enable it */
+ value = apic_read(APIC_SPIV);
+ value &= ~APIC_VECTOR_MASK;
+ value |= APIC_SPIV_APIC_ENABLED;
+ value |= 0xf;
+ apic_write_around(APIC_SPIV, value);
+
+ if (!virt_wire_setup) {
+ /* For LVT0 make it edge triggered, active high, external and enabled */
+ value = apic_read(APIC_LVT0);
+ value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
+ apic_write_around(APIC_LVT0, value);
+ }
+ else {
+ /* Disable LVT0 */
+ apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+ }
+
+ /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ value = apic_read(APIC_LVT1);
+ value &= ~(
+ APIC_MODE_MASK | APIC_SEND_PENDING |
+ APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
+ value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
+ value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
+ apic_write_around(APIC_LVT1, value);
+ }
}
void disable_local_APIC(void)
*/
apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
- if (!APIC_INTEGRATED(ver)) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value);
}
-void __init setup_local_APIC (void)
+void __cpuinit setup_local_APIC (void)
{
unsigned int value, ver, maxlvt;
- /* Pound the ESR really hard over the head with a big hammer - mbligh */
- if (esr_disable) {
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- apic_write(APIC_ESR, 0);
- }
-
value = apic_read(APIC_LVR);
ver = GET_APIC_VERSION(value);
value = APIC_DM_NMI;
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
- if (!APIC_INTEGRATED(ver)) /* 82489DX */
- value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value);
- if (APIC_INTEGRATED(ver) && !esr_disable) { /* !82489DX */
+ {
unsigned oldvalue;
maxlvt = get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
oldvalue = apic_read(APIC_ESR);
value = ERROR_APIC_VECTOR; // enables sending errors
apic_write_around(APIC_LVTERR, value);
apic_printk(APIC_VERBOSE,
"ESR value after enabling vector: %08x, after %08x\n",
oldvalue, value);
- } else {
- if (esr_disable)
- /*
- * Something untraceble is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- apic_printk(APIC_DEBUG, "Leaving ESR disabled.\n");
- else
- apic_printk(APIC_DEBUG, "No ESR for 82489DX.\n");
}
nmi_watchdog_default();
.cls = &lapic_sysclass,
};
-static void __init apic_pm_activate(void)
+static void __cpuinit apic_pm_activate(void)
{
apic_pm_state.active = 1;
}
ver = GET_APIC_VERSION(apic_read(APIC_LVR));
lvtt_value = APIC_LVT_TIMER_PERIODIC | LOCAL_TIMER_VECTOR;
- if (!APIC_INTEGRATED(ver))
- lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
apic_write_around(APIC_LVTT, lvtt_value);
/*
local_irq_enable();
}
-void __init setup_secondary_APIC_clock(void)
+void __cpuinit setup_secondary_APIC_clock(void)
{
local_irq_disable(); /* FIXME: Do we need this? --RR */
setup_APIC_timer(calibration_result);
local_irq_enable();
}
-void __init disable_APIC_timer(void)
+void __cpuinit disable_APIC_timer(void)
{
if (using_apic_timer) {
unsigned long v;