#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
+#include <asm/idle.h>
#include <asm/smp.h>
#include <asm/trampoline.h>
#include <asm/cpu.h>
end_local_APIC_setup();
map_cpu_to_logical_apicid();
+ notify_cpu_starting(cpuid);
/*
* Get our bogomips.
*
* does not change while we are assigning vectors to cpus. Holding
* this lock ensures we don't half assign or remove an irq from a cpu.
*/
- ipi_call_lock_irq();
+ ipi_call_lock();
lock_vector_lock();
__setup_vector_irq(smp_processor_id());
cpu_set(smp_processor_id(), cpu_online_map);
unlock_vector_lock();
- ipi_call_unlock_irq();
+ ipi_call_unlock();
per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+ /* enable local interrupts */
+ local_irq_enable();
+
setup_secondary_clock();
wmb();
* Give the other CPU some time to accept the IPI.
*/
udelay(200);
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- accept_status = (apic_read(APIC_ESR) & 0xEF);
+ if (APIC_INTEGRATED(apic_version[phys_apicid])) {
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ accept_status = (apic_read(APIC_ESR) & 0xEF);
+ }
pr_debug("NMI sent.\n");
if (send_status)
check_nmi_watchdog();
}
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
- int sibling;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
- cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
- /*/
- * last thread sibling in this cpu core going down
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
- cpu_data(sibling).booted_cores--;
- }
-
- for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
- cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- c->phys_proc_id = 0;
- c->cpu_core_id = 0;
- cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-static int additional_cpus __initdata = -1;
-
-static __init int setup_additional_cpus(char *s)
-{
- return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
+static int additional_cpus __initdata = CONFIG_HOTPLUG_ADDITIONAL_CPUS;
/*
* cpu_possible_map should be static, it cannot change as cpu's
if (!num_processors)
num_processors = 1;
-#ifdef CONFIG_HOTPLUG_CPU
if (additional_cpus == -1) {
if (disabled_cpus > 0)
additional_cpus = disabled_cpus;
else
additional_cpus = 0;
}
-#else
- additional_cpus = 0;
-#endif
+
possible = num_processors + additional_cpus;
if (possible > NR_CPUS)
possible = NR_CPUS;
nr_cpu_ids = possible;
}
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void remove_siblinginfo(int cpu)
+{
+ int sibling;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
+ cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
+ /*/
+ * last thread sibling in this cpu core going down
+ */
+ if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
+ cpu_data(sibling).booted_cores--;
+ }
+
+ for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
+ cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
+ cpus_clear(per_cpu(cpu_sibling_map, cpu));
+ cpus_clear(per_cpu(cpu_core_map, cpu));
+ c->phys_proc_id = 0;
+ c->cpu_core_id = 0;
+ cpu_clear(cpu, cpu_sibling_setup_map);
+}
+
+static __init int setup_additional_cpus(char *s)
+{
+ return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
+}
+early_param("additional_cpus", setup_additional_cpus);
+
static void __ref remove_cpu_from_maps(int cpu)
{
cpu_clear(cpu, cpu_online_map);
numa_remove_cpu(cpu);
}
-int __cpu_disable(void)
+void cpu_disable_common(void)
{
int cpu = smp_processor_id();
-
- /*
- * Perhaps use cpufreq to drop frequency, but that could go
- * into generic code.
- *
- * We won't take down the boot processor on i386 due to some
- * interrupts only being able to be serviced by the BSP.
- * Especially so if we're not using an IOAPIC -zwane
- */
- if (cpu == 0)
- return -EBUSY;
-
- if (nmi_watchdog == NMI_LOCAL_APIC)
- stop_apic_nmi_watchdog(NULL);
- clear_local_APIC();
-
/*
* HACK:
* Allow any queued timer interrupts to get serviced
remove_cpu_from_maps(cpu);
unlock_vector_lock();
fixup_irqs(cpu_online_map);
+}
+
+int native_cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * Perhaps use cpufreq to drop frequency, but that could go
+ * into generic code.
+ *
+ * We won't take down the boot processor on i386 due to some
+ * interrupts only being able to be serviced by the BSP.
+ * Especially so if we're not using an IOAPIC -zwane
+ */
+ if (cpu == 0)
+ return -EBUSY;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ stop_apic_nmi_watchdog(NULL);
+ clear_local_APIC();
+
+ cpu_disable_common();
return 0;
}
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
{
/* We don't do anything here: idle task is faking death itself. */
unsigned int i;
}
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
+
+void play_dead_common(void)
+{
+ idle_task_exit();
+ reset_lazy_tlbstate();
+ irq_ctx_exit(raw_smp_processor_id());
+ c1e_remove_cpu(raw_smp_processor_id());
+
+ mb();
+ /* Ack it */
+ __get_cpu_var(cpu_state) = CPU_DEAD;
+
+ /*
+ * With physical CPU hotplug, we should halt the cpu
+ */
+ local_irq_disable();
+}
+
+void native_play_dead(void)
+{
+ play_dead_common();
+ wbinvd_halt();
+}
+
#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
+int native_cpu_disable(void)
{
return -ENOSYS;
}
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
{
/* We said "no" in __cpu_disable */
BUG();
}
+
+void native_play_dead(void)
+{
+ BUG();
+}
+
#endif