*/
int nr_ioapic_registers[MAX_IO_APICS];
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
static int disable_timer_pin_1 __initdata;
/*
{
struct IO_APIC_route_entry entry;
int apic, pin, idx, irq, first_notcon = 1, vector;
- unsigned long flags;
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
if (!apic && (irq < 16))
disable_8259A_irq(irq);
}
- spin_lock_irqsave(&ioapic_lock, flags);
- __ioapic_write_entry(apic, pin, entry);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
}
}
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
- v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v,
+ GET_APIC_ID(read_apic_id()));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
entry.dest.physical.physical_dest =
- GET_APIC_ID(apic_read(APIC_ID));
+ GET_APIC_ID(read_apic_id());
/*
* Add it to the IO-APIC irq-routing table:
* 0x80, because int 0x80 is hm, kind of importantish. ;)
*/
for (irq = 0; irq < NR_IRQS ; irq++) {
- int tmp = irq;
- if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
+ if (IO_APIC_IRQ(irq) && !irq_vector[irq]) {
/*
* Hmm.. We don't have an entry for this,
* so default to an old-fashioned 8259
* cycles as some i82489DX-based boards have glue logic that keeps the
* 8259A interrupt line asserted until INTA. --macro
*/
-static inline void unlock_ExtINT_logic(void)
+static inline void __init unlock_ExtINT_logic(void)
{
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
{
int apic1, pin1, apic2, pin2;
int vector;
+ unsigned int ver;
unsigned long flags;
local_irq_save(flags);
+ ver = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(ver);
+
/*
* get/set the timer IRQ vector:
*/
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC.
+ * disabled in the local APIC. Finally timer interrupts
+ * need to be acknowledged manually in the 8259A for
+ * timer_interrupt() and for the i82489DX when using
+ * the NMI watchdog.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = 1;
+ timer_ack = !cpu_has_tsc;
+ timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
if (timer_over_8254 > 0)
enable_8259A_irq(0);
dynamic_irq_cleanup(irq);
spin_lock_irqsave(&vector_lock, flags);
+ clear_bit(irq_vector[irq], used_vectors);
irq_vector[irq] = 0;
spin_unlock_irqrestore(&vector_lock, flags);
}
int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
if (!IO_APIC_IRQ(irq)) {
printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
- spin_lock_irqsave(&ioapic_lock, flags);
- __ioapic_write_entry(ioapic, pin, entry);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(ioapic, pin, entry);
return 0;
}