#include <mach_apicdef.h>
#include <mach_ipi.h>
-#include "io_ports.h"
-
/*
* Sanity check
*/
-#if (SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F
+#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
# error SPURIOUS_APIC_VECTOR definition error
#endif
+unsigned long mp_lapic_addr;
+
/*
* Knob to control our willingness to enable the local APIC.
*
- * -1=force-disable, +1=force-enable
+ * +1=force-enable
*/
-static int enable_local_apic __initdata = 0;
+static int force_enable_local_apic;
+int disable_apic;
/* Local APIC timer verification ok */
static int local_apic_timer_verify_ok;
-/* Disable local APIC timer from the kernel commandline or via dmi quirk
- or using CPU MSR check */
-int local_apic_timer_disabled;
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
+static int local_apic_timer_disabled;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
+int first_system_vector = 0xfe;
+
+char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
+
/*
* Debug level, exported for io_apic.c
*/
int apic_verbosity;
+int pic_mode;
+
+/* Have we found an MP table */
+int smp_found_config;
+
+static struct resource lapic_resource = {
+ .name = "Local APIC",
+ .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
+};
+
static unsigned int calibration_result;
static int lapic_next_event(unsigned long delta,
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
+static unsigned long apic_phys;
+
/*
* Get the LAPIC version
*/
}
/*
- * Check, if the APIC is integrated or a seperate chip
+ * Check, if the APIC is integrated or a separate chip
*/
static inline int lapic_is_integrated(void)
{
cpu_relax();
}
-unsigned long safe_apic_wait_icr_idle(void)
+u32 safe_apic_wait_icr_idle(void)
{
- unsigned long send_status;
+ u32 send_status;
int timeout;
timeout = 0;
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
-void enable_NMI_through_LVT0 (void * dummy)
+void __cpuinit enable_NMI_through_LVT0(void)
{
unsigned int v = APIC_DM_NMI;
*/
if (local_apic_timer_disabled) {
/* No broadcast on UP ! */
- if (num_possible_cpus() > 1)
+ if (num_possible_cpus() > 1) {
+ lapic_clockevent.mult = 1;
setup_APIC_timer();
+ }
return;
}
"with PM Timer: %ldms instead of 100ms\n",
(long)res);
/* Correct the lapic counter value */
- res = (((u64) delta ) * pm_100ms);
+ res = (((u64) delta) * pm_100ms);
do_div(res, deltapm);
printk(KERN_INFO "APIC delta adjusted to PM-Timer: "
"%lu (%ld)\n", (unsigned long) res, delta);
}
/* Calculate the scaled math multiplication factor */
- lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS, 32);
+ lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
+ lapic_clockevent.shift);
lapic_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFFFF, &lapic_clockevent);
lapic_clockevent.min_delta_ns =
local_apic_timer_verify_ok = 1;
+ /*
+ * Do a sanity check on the APIC calibration result
+ */
+ if (calibration_result < (1000000 / HZ)) {
+ local_irq_enable();
+ printk(KERN_WARNING
+ "APIC frequency too slow, disabling apic timer\n");
+ /* No broadcast on UP ! */
+ if (num_possible_cpus() > 1)
+ setup_APIC_timer();
+ return;
+ }
+
/* We trust the pm timer based calibration */
if (!pm_referenced) {
apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
else
printk(KERN_WARNING "APIC timer registered as dummy,"
- " due to nmi_watchdog=1!\n");
+ " due to nmi_watchdog=%d!\n", nmi_watchdog);
}
/* Setup the lapic or request the broadcast */
return;
}
+ /*
+ * the NMI deadlock-detector uses this.
+ */
per_cpu(irq_stat, cpu).apic_timer_irqs++;
evt->event_handler(evt);
* [ if a single-CPU system runs an SMP kernel then we call the local
* interrupt as well. Thus we cannot inline the local irq ... ]
*/
-
-void fastcall smp_apic_timer_interrupt(struct pt_regs *regs)
+void smp_apic_timer_interrupt(struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
return -EINVAL;
}
+/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+ unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned int v = (mask << 16) | (msg_type << 8) | vector;
+ apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_IBS;
+}
+
/*
* Local APIC start and shutdown
*/
*/
void clear_local_APIC(void)
{
- int maxlvt = lapic_get_maxlvt();
- unsigned long v;
+ int maxlvt;
+ u32 v;
+ /* APIC hasn't been mapped yet */
+ if (!apic_phys)
+ return;
+
+ maxlvt = lapic_get_maxlvt();
/*
* Masking an LVT entry can trigger a local APIC error
* if the vector is zero. Mask LVTERR first to prevent this.
apic_write_around(APIC_LVT1, value);
}
+static void __cpuinit lapic_setup_esr(void)
+{
+ unsigned long oldvalue, value, maxlvt;
+ if (lapic_is_integrated() && !esr_disable) {
+ /* !82489DX */
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ oldvalue = apic_read(APIC_ESR);
+
+ /* enables sending errors */
+ value = ERROR_APIC_VECTOR;
+ apic_write_around(APIC_LVTERR, value);
+ /*
+ * spec says clear errors after enabling vector.
+ */
+ if (maxlvt > 3)
+ apic_write(APIC_ESR, 0);
+ value = apic_read(APIC_ESR);
+ if (value != oldvalue)
+ apic_printk(APIC_VERBOSE, "ESR value before enabling "
+ "vector: 0x%08lx after: 0x%08lx\n",
+ oldvalue, value);
+ } else {
+ if (esr_disable)
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ else
+ printk(KERN_INFO "No ESR for 82489DX.\n");
+ }
+}
+
+
/**
* setup_local_APIC - setup the local APIC
*/
void __cpuinit setup_local_APIC(void)
{
- unsigned long oldvalue, value, maxlvt, integrated;
+ unsigned long value, integrated;
int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
* Double-check whether this APIC is really registered.
*/
if (!apic_id_registered())
- BUG();
+ WARN_ON_ONCE(1);
/*
* Intel recommends to set DFR, LDR and TPR before enabling
if (!integrated) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value);
+}
- if (integrated && !esr_disable) { /* !82489DX */
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- oldvalue = apic_read(APIC_ESR);
-
- /* enables sending errors */
- value = ERROR_APIC_VECTOR;
- apic_write_around(APIC_LVTERR, value);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
- value = apic_read(APIC_ESR);
- if (value != oldvalue)
- apic_printk(APIC_VERBOSE, "ESR value before enabling "
- "vector: 0x%08lx after: 0x%08lx\n",
- oldvalue, value);
- } else {
- if (esr_disable)
- /*
- * Something untraceable is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- else
- printk(KERN_INFO "No ESR for 82489DX.\n");
- }
+void __cpuinit end_local_APIC_setup(void)
+{
+ unsigned long value;
+ lapic_setup_esr();
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
/*
* Detect and initialize APIC
*/
-static int __init detect_init_APIC (void)
+static int __init detect_init_APIC(void)
{
u32 h, l, features;
/* Disabled by kernel option? */
- if (enable_local_apic < 0)
+ if (disable_apic)
return -1;
switch (boot_cpu_data.x86_vendor) {
* Over-ride BIOS and try to enable the local APIC only if
* "lapic" specified.
*/
- if (enable_local_apic <= 0) {
+ if (!force_enable_local_apic) {
printk(KERN_INFO "Local APIC disabled by BIOS -- "
"you can enable it with \"lapic\"\n");
return -1;
printk(KERN_WARNING "Could not enable APIC!\n");
return -1;
}
- set_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
/* The BIOS may have set up the APIC at some other address */
if (l & MSR_IA32_APICBASE_ENABLE)
mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
- if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED)
- nmi_watchdog = NMI_LOCAL_APIC;
-
printk(KERN_INFO "Found and enabled local APIC!\n");
apic_pm_activate();
*/
void __init init_apic_mappings(void)
{
- unsigned long apic_phys;
-
/*
* If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
-#ifdef CONFIG_X86_IO_APIC
- {
- unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
- int i;
-
- for (i = 0; i < nr_ioapics; i++) {
- if (smp_found_config) {
- ioapic_phys = mp_ioapics[i].mpc_apicaddr;
- if (!ioapic_phys) {
- printk(KERN_ERR
- "WARNING: bogus zero IO-APIC "
- "address found in MPTABLE, "
- "disabling IO/APIC support!\n");
- smp_found_config = 0;
- skip_ioapic_setup = 1;
- goto fake_ioapic_page;
- }
- } else {
-fake_ioapic_page:
- ioapic_phys = (unsigned long)
- alloc_bootmem_pages(PAGE_SIZE);
- ioapic_phys = __pa(ioapic_phys);
- }
- set_fixmap_nocache(idx, ioapic_phys);
- printk(KERN_DEBUG "mapped IOAPIC to %08lx (%08lx)\n",
- __fix_to_virt(idx), ioapic_phys);
- idx++;
- }
- }
-#endif
}
/*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
-int __init APIC_init_uniprocessor (void)
+
+int apic_version[MAX_APICS];
+
+int __init APIC_init_uniprocessor(void)
{
- if (enable_local_apic < 0)
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ if (disable_apic)
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
if (!smp_found_config && !cpu_has_apic)
return -1;
APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
return -1;
}
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
#endif
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+ physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
setup_local_APIC();
+#ifdef CONFIG_X86_IO_APIC
+ if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
+#endif
+ localise_nmi_watchdog();
+ end_local_APIC_setup();
#ifdef CONFIG_X86_IO_APIC
if (smp_found_config)
if (!skip_ioapic_setup && nr_ioapics)
return 0;
}
-/*
- * APIC command line parameters
- */
-static int __init parse_lapic(char *arg)
-{
- enable_local_apic = 1;
- return 0;
-}
-early_param("lapic", parse_lapic);
-
-static int __init parse_nolapic(char *arg)
-{
- enable_local_apic = -1;
- clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
- return 0;
-}
-early_param("nolapic", parse_nolapic);
-
-static int __init parse_disable_lapic_timer(char *arg)
-{
- local_apic_timer_disabled = 1;
- return 0;
-}
-early_param("nolapic_timer", parse_disable_lapic_timer);
-
-static int __init parse_lapic_timer_c2_ok(char *arg)
-{
- local_apic_timer_c2_ok = 1;
- return 0;
-}
-early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-
-static int __init apic_set_verbosity(char *str)
-{
- if (strcmp("debug", str) == 0)
- apic_verbosity = APIC_DEBUG;
- else if (strcmp("verbose", str) == 0)
- apic_verbosity = APIC_VERBOSE;
- return 1;
-}
-
-__setup("apic=", apic_set_verbosity);
-
-
/*
* Local APIC interrupts
*/
6: Received illegal vector
7: Illegal register address
*/
- printk (KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
+ printk(KERN_DEBUG "APIC error on CPU%d: %02lx(%02lx)\n",
smp_processor_id(), v , v1);
irq_exit();
}
+#ifdef CONFIG_SMP
+void __init smp_intr_init(void)
+{
+ /*
+ * IRQ0 must be given a fixed assignment and initialized,
+ * because it's used before the IO-APIC is set up.
+ */
+ set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPI for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+}
+#endif
+
/*
* Initialize APIC interrupts
*/
smp_intr_init();
#endif
/* self generated IPI for local APIC timer */
- set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
- set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- set_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
/* thermal monitor LVT interrupt */
#ifdef CONFIG_X86_MCE_P4THERMAL
- set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
}
value = apic_read(APIC_LVT0);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
- APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED );
+ APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
apic_write_around(APIC_LVT0, value);
}
}
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
+
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+ int cpu;
+ cpumask_t tmp_map;
+ physid_mask_t phys_cpu;
+
+ /*
+ * Validate version
+ */
+ if (version == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ version);
+ version = 0x10;
+ }
+ apic_version[apicid] = version;
+
+ phys_cpu = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+
+ num_processors++;
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
+
+ if (apicid == boot_cpu_physical_apicid)
+ /*
+ * x86_bios_cpu_apicid is required to have processors listed
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
+ cpu = 0;
+
+ if (apicid > max_physical_apicid)
+ max_physical_apicid = apicid;
+
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (max_physical_apicid >= 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+#ifdef CONFIG_SMP
+ /* are we being called early in kernel startup? */
+ if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
+ u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
+ u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
+
+ cpu_to_apicid[cpu] = apicid;
+ bios_cpu_apicid[cpu] = apicid;
+ } else {
+ per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+ per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+ }
+#endif
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
+}
+
/*
* Power management
*/
static void apic_pm_activate(void) { }
#endif /* CONFIG_PM */
+
+/*
+ * APIC command line parameters
+ */
+static int __init parse_lapic(char *arg)
+{
+ force_enable_local_apic = 1;
+ return 0;
+}
+early_param("lapic", parse_lapic);
+
+static int __init parse_nolapic(char *arg)
+{
+ disable_apic = 1;
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+ return 0;
+}
+early_param("nolapic", parse_nolapic);
+
+static int __init parse_disable_lapic_timer(char *arg)
+{
+ local_apic_timer_disabled = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_disable_lapic_timer);
+
+static int __init parse_lapic_timer_c2_ok(char *arg)
+{
+ local_apic_timer_c2_ok = 1;
+ return 0;
+}
+early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
+
+static int __init apic_set_verbosity(char *str)
+{
+ if (strcmp("debug", str) == 0)
+ apic_verbosity = APIC_DEBUG;
+ else if (strcmp("verbose", str) == 0)
+ apic_verbosity = APIC_VERBOSE;
+ return 1;
+}
+__setup("apic=", apic_set_verbosity);
+
+static int __init lapic_insert_resource(void)
+{
+ if (!apic_phys)
+ return -1;
+
+ /* Put local APIC into the resource map. */
+ lapic_resource.start = apic_phys;
+ lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+ insert_resource(&iomem_resource, &lapic_resource);
+
+ return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);