/*
* Local APIC handling, local APIC timers
*
- * (c) 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
*
* Fixes
* Maciej W. Rozycki : Bits for genuine 82489DX APICs;
* Mikael Pettersson : PM converted to driver model.
*/
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/interrupt.h>
-#include <linux/mc146818rtc.h>
#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/ioport.h>
-#include <linux/cpu.h>
-#include <linux/clockchips.h>
+#include <linux/mc146818rtc.h>
#include <linux/acpi_pmtmr.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/ftrace.h>
+#include <linux/ioport.h>
#include <linux/module.h>
-#include <linux/dmi.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/timex.h>
#include <linux/dmar.h>
-#include <linux/ftrace.h>
-#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/dmi.h>
#include <linux/nmi.h>
-#include <linux/timex.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
-#include <asm/atomic.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/desc.h>
#include <asm/arch_hooks.h>
-#include <asm/hpet.h>
#include <asm/pgalloc.h>
+#include <asm/atomic.h>
+#include <asm/mpspec.h>
#include <asm/i8253.h>
-#include <asm/idle.h>
+#include <asm/i8259.h>
#include <asm/proto.h>
#include <asm/apic.h>
-#include <asm/i8259.h>
+#include <asm/desc.h>
+#include <asm/hpet.h>
+#include <asm/idle.h>
+#include <asm/mtrr.h>
#include <asm/smp.h>
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-#include <mach_ipi.h>
+unsigned int num_processors;
+
+unsigned disabled_cpus __cpuinitdata;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+
+/*
+ * The highest APIC ID seen during enumeration.
+ *
+ * This determines the messaging protocol we can use: if all APIC IDs
+ * are in the 0 ... 7 range, then we can use logical addressing which
+ * has some performance advantages (better broadcasting).
+ *
+ * If there's an APIC ID above 8, we use physical addressing.
+ */
+unsigned int max_physical_apicid;
/*
- * Sanity check
+ * Bitmask of physically existing CPUs:
*/
-#if ((SPURIOUS_APIC_VECTOR & 0x0F) != 0x0F)
-# error SPURIOUS_APIC_VECTOR definition error
-#endif
+physid_mask_t phys_cpu_present_map;
+
+/*
+ * Map cpu index to physical APIC ID
+ */
+DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
#ifdef CONFIG_X86_32
/*
__setup("apicpmtimer", setup_apicpmtimer);
#endif
-#ifdef CONFIG_X86_64
-#define HAVE_X2APIC
-#endif
-
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
int x2apic;
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
return lapic_get_version() >= 0x14;
}
-/*
- * Paravirt kernels also might be using these below ops. So we still
- * use generic apic_read()/apic_write(), which might be pointing to different
- * ops in PARAVIRT case.
- */
-void xapic_wait_icr_idle(void)
+void native_apic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_xapic_wait_icr_idle(void)
+u32 native_safe_apic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
return send_status;
}
-void xapic_icr_write(u32 low, u32 id)
+void native_apic_icr_write(u32 low, u32 id)
{
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
apic_write(APIC_ICR, low);
}
-static u64 xapic_icr_read(void)
+u64 native_apic_icr_read(void)
{
u32 icr1, icr2;
return icr1 | ((u64)icr2 << 32);
}
-static struct apic_ops xapic_ops = {
- .read = native_apic_mem_read,
- .write = native_apic_mem_write,
- .icr_read = xapic_icr_read,
- .icr_write = xapic_icr_write,
- .wait_icr_idle = xapic_wait_icr_idle,
- .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
-};
-
-struct apic_ops __read_mostly *apic_ops = &xapic_ops;
-EXPORT_SYMBOL_GPL(apic_ops);
-
-#ifdef HAVE_X2APIC
-static void x2apic_wait_icr_idle(void)
-{
- /* no need to wait for icr idle in x2apic */
- return;
-}
-
-static u32 safe_x2apic_wait_icr_idle(void)
-{
- /* no need to wait for icr idle in x2apic */
- return 0;
-}
-
-void x2apic_icr_write(u32 low, u32 id)
-{
- wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
-}
-
-static u64 x2apic_icr_read(void)
-{
- unsigned long val;
-
- rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
- return val;
-}
-
-static struct apic_ops x2apic_ops = {
- .read = native_apic_msr_read,
- .write = native_apic_msr_write,
- .icr_read = x2apic_icr_read,
- .icr_write = x2apic_icr_write,
- .wait_icr_idle = x2apic_wait_icr_idle,
- .safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
-};
-#endif
-
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
static void lapic_timer_broadcast(const struct cpumask *mask)
{
#ifdef CONFIG_SMP
- send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
+ apic->send_IPI_mask(mask, LOCAL_TIMER_VECTOR);
#endif
}
}
}
-static int __init calibrate_by_pmtimer(long deltapm, long *delta)
+static int __init
+calibrate_by_pmtimer(long deltapm, long *delta, long *deltatsc)
{
const long pm_100ms = PMTMR_TICKS_PER_SEC / 10;
const long pm_thresh = pm_100ms / 100;
return -1;
#endif
- apic_printk(APIC_VERBOSE, "... PM timer delta = %ld\n", deltapm);
+ apic_printk(APIC_VERBOSE, "... PM-Timer delta = %ld\n", deltapm);
/* Check, if the PM timer is available */
if (!deltapm)
if (deltapm > (pm_100ms - pm_thresh) &&
deltapm < (pm_100ms + pm_thresh)) {
- apic_printk(APIC_VERBOSE, "... PM timer result ok\n");
- } else {
- res = (((u64)deltapm) * mult) >> 22;
- do_div(res, 1000000);
- pr_warning("APIC calibration not consistent "
- "with PM Timer: %ldms instead of 100ms\n",
- (long)res);
- /* Correct the lapic counter value */
- res = (((u64)(*delta)) * pm_100ms);
+ apic_printk(APIC_VERBOSE, "... PM-Timer result ok\n");
+ return 0;
+ }
+
+ res = (((u64)deltapm) * mult) >> 22;
+ do_div(res, 1000000);
+ pr_warning("APIC calibration not consistent "
+ "with PM-Timer: %ldms instead of 100ms\n",(long)res);
+
+ /* Correct the lapic counter value */
+ res = (((u64)(*delta)) * pm_100ms);
+ do_div(res, deltapm);
+ pr_info("APIC delta adjusted to PM-Timer: "
+ "%lu (%ld)\n", (unsigned long)res, *delta);
+ *delta = (long)res;
+
+ /* Correct the tsc counter value */
+ if (cpu_has_tsc) {
+ res = (((u64)(*deltatsc)) * pm_100ms);
do_div(res, deltapm);
- pr_info("APIC delta adjusted to PM-Timer: "
- "%lu (%ld)\n", (unsigned long)res, *delta);
- *delta = (long)res;
+ apic_printk(APIC_VERBOSE, "TSC delta adjusted to "
+ "PM-Timer: %lu (%ld) \n",
+ (unsigned long)res, *deltatsc);
+ *deltatsc = (long)res;
}
return 0;
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
void (*real_handler)(struct clock_event_device *dev);
unsigned long deltaj;
- long delta;
+ long delta, deltatsc;
int pm_referenced = 0;
local_irq_disable();
delta = lapic_cal_t1 - lapic_cal_t2;
apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
+ deltatsc = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
+
/* we trust the PM based calibration if possible */
pm_referenced = !calibrate_by_pmtimer(lapic_cal_pm2 - lapic_cal_pm1,
- &delta);
+ &delta, &deltatsc);
/* Calculate the scaled math multiplication factor */
lapic_clockevent.mult = div_sc(delta, TICK_NSEC * LAPIC_CAL_LOOPS,
calibration_result);
if (cpu_has_tsc) {
- delta = (long)(lapic_cal_tsc2 - lapic_cal_tsc1);
apic_printk(APIC_VERBOSE, "..... CPU clock speed is "
"%ld.%04ld MHz.\n",
- (delta / LAPIC_CAL_LOOPS) / (1000000 / HZ),
- (delta / LAPIC_CAL_LOOPS) % (1000000 / HZ));
+ (deltatsc / LAPIC_CAL_LOOPS) / (1000000 / HZ),
+ (deltatsc / LAPIC_CAL_LOOPS) % (1000000 / HZ));
}
apic_printk(APIC_VERBOSE, "..... host bus clock speed is "
*/
reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
- apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
+ apic_write(APIC_ID, reg0 ^ apic->apic_id_mask);
reg1 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
- if (reg1 != (reg0 ^ APIC_ID_MASK))
+ if (reg1 != (reg0 ^ apic->apic_id_mask))
return 0;
/*
return;
}
- if (esr_disable) {
+ if (apic->disable_esr) {
/*
* Something untraceable is creating bad interrupts on
* secondary quads ... for the moment, just leave the
unsigned int value;
int i, j;
+ if (disable_apic) {
+ arch_disable_smp_support();
+ return;
+ }
+
#ifdef CONFIG_X86_32
/* Pound the ESR really hard over the head with a big hammer - mbligh */
- if (lapic_is_integrated() && esr_disable) {
+ if (lapic_is_integrated() && apic->disable_esr) {
apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
apic_write(APIC_ESR, 0);
* Double-check whether this APIC is really registered.
* This is meaningless in clustered apic mode, so we skip it.
*/
- if (!apic_id_registered())
+ if (!apic->apic_id_registered())
BUG();
/*
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
- init_apic_ldr();
+ apic->init_apic_ldr();
/*
* Set Task Priority to 'accept all'. We never change this
apic_pm_activate();
}
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
void check_x2apic(void)
{
- int msr, msr2;
-
- rdmsr(MSR_IA32_APICBASE, msr, msr2);
-
- if (msr & X2APIC_ENABLE) {
+ if (x2apic_enabled()) {
pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
x2apic_preenabled = x2apic = 1;
- apic_ops = &x2apic_ops;
}
}
{
int msr, msr2;
+ if (!x2apic)
+ return;
+
rdmsr(MSR_IA32_APICBASE, msr, msr2);
if (!(msr & X2APIC_ENABLE)) {
pr_info("Enabling x2apic\n");
if (!x2apic) {
x2apic = 1;
- apic_ops = &x2apic_ops;
enable_x2apic();
}
return;
}
-#endif /* HAVE_X2APIC */
+#endif /* CONFIG_X86_X2APIC */
#ifdef CONFIG_X86_64
/*
*/
void __init init_apic_mappings(void)
{
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
if (x2apic) {
boot_cpu_physical_apicid = read_apic_id();
return;
int __init APIC_init_uniprocessor(void)
{
-#ifdef CONFIG_X86_64
if (disable_apic) {
pr_info("Apic disabled\n");
return -1;
}
+#ifdef CONFIG_X86_64
if (!cpu_has_apic) {
disable_apic = 1;
pr_info("Apic disabled by BIOS\n");
}
#endif
-#ifdef HAVE_X2APIC
enable_IR_x2apic();
-#endif
#ifdef CONFIG_X86_64
- setup_apic_routing();
+ default_setup_apic_routing();
#endif
verify_local_APIC();
physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
setup_local_APIC();
-#ifdef CONFIG_X86_64
+#ifdef CONFIG_X86_IO_APIC
/*
* Now enable IO-APICs, actually call clear_IO_APIC
- * We need clear_IO_APIC before enabling vector on BP
+ * We need clear_IO_APIC before enabling error vector
*/
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
#endif
-#ifdef CONFIG_X86_IO_APIC
- if (!smp_found_config || skip_ioapic_setup || !nr_ioapics)
-#endif
- localise_nmi_watchdog();
end_local_APIC_setup();
#ifdef CONFIG_X86_IO_APIC
if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
setup_IO_APIC();
-# ifdef CONFIG_X86_64
- else
+ else {
nr_ioapics = 0;
-# endif
+ localise_nmi_watchdog();
+ }
+#else
+ localise_nmi_watchdog();
#endif
+ setup_boot_clock();
#ifdef CONFIG_X86_64
- setup_boot_APIC_clock();
check_nmi_watchdog();
-#else
- setup_boot_clock();
#endif
return 0;
outb(0x01, 0x23);
}
#endif
- enable_apic_mode();
+ if (apic->enable_apic_mode)
+ apic->enable_apic_mode();
}
/**
}
#endif
-#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
- /* are we being called early in kernel startup? */
- if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
- u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
- u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
-
- cpu_to_apicid[cpu] = apicid;
- bios_cpu_apicid[cpu] = apicid;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
- }
+#if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
+ early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+ early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
#endif
set_cpu_possible(cpu, true);
set_cpu_present(cpu, true);
}
-#ifdef CONFIG_X86_64
int hard_smp_processor_id(void)
{
return read_apic_id();
}
+
+void default_init_apic_ldr(void)
+{
+ unsigned long val;
+
+ apic_write(APIC_DFR, APIC_DFR_VALUE);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+ apic_write(APIC_LDR, val);
+}
+
+#ifdef CONFIG_X86_32
+int default_apicid_to_node(int logical_apicid)
+{
+#ifdef CONFIG_SMP
+ return apicid_2_node[hard_smp_processor_id()];
+#else
+ return 0;
+#endif
+}
#endif
/*
local_irq_save(flags);
-#ifdef HAVE_X2APIC
+#ifdef CONFIG_X86_X2APIC
if (x2apic)
enable_x2apic();
else
git.openpandora.org / pandora-kernel.git / blobdiff