* Do an PCI bus scan by hand because we're running before the PCI
* subsystem.
*
- * All K8 AGP bridges are AGPv3 compliant, so we can do this scan
+ * All AMD AGP bridges are AGPv3 compliant, so we can do this scan
* generically. It's probably overkill to always scan all slots because
* the AGP bridges should be always an own bus on the HT hierarchy,
* but do it here for future safety.
dev_limit = bus_dev_ranges[i].dev_limit;
for (slot = dev_base; slot < dev_limit; slot++) {
- if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
continue;
ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
dev_limit = bus_dev_ranges[i].dev_limit;
for (slot = dev_base; slot < dev_limit; slot++) {
- if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
continue;
ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
dev_limit = bus_dev_ranges[i].dev_limit;
for (slot = dev_base; slot < dev_limit; slot++) {
- if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
continue;
iommu_detected = 1;
dev_base = bus_dev_ranges[i].dev_base;
dev_limit = bus_dev_ranges[i].dev_limit;
for (slot = dev_base; slot < dev_limit; slot++) {
- if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
continue;
write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);