x86: Add quirk for reboot stalls on a Dell Optiplex 360

[pandora-kernel.git] / arch / x86 / Kconfig

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index ac2fb06..d0561fe 100644 (file)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -123,6 +123,9 @@ config GENERIC_TIME_VSYSCALL
 config ARCH_HAS_CPU_RELAX
        def_bool y
 
+config ARCH_HAS_DEFAULT_IDLE
+       def_bool y
+
 config ARCH_HAS_CACHE_LINE_SIZE
        def_bool y
 
@@ -567,7 +570,7 @@ config AMD_IOMMU
 
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
-       bool
+       def_bool y if X86_64
        help
          Support for software bounce buffers used on x86-64 systems
          which don't have a hardware IOMMU (e.g. the current generation
@@ -577,35 +580,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
        def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
        bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-       depends on X86_64 && SMP
+       depends on X86_64 && SMP && BROKEN
        default n
        help
          Configure maximum number of CPUS and NUMA Nodes for this architecture.
          If unsure, say N.
 
-if MAXSMP
 config NR_CPUS
-       int
-       default "4096"
-endif
-
-if !MAXSMP
-config NR_CPUS
-       int "Maximum number of CPUs (2-4096)"
-       range 2 4096
+       int "Maximum number of CPUs (2-512)" if !MAXSMP
+       range 2 512
        depends on SMP
+       default "4096" if MAXSMP
        default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
        default "8"
        help
          This allows you to specify the maximum number of CPUs which this
-         kernel will support.  The maximum supported value is 4096 and the
+         kernel will support.  The maximum supported value is 512 and the
          minimum value which makes sense is 2.
 
          This is purely to save memory - each supported CPU adds
          approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
        bool "SMT (Hyperthreading) scheduler support"
@@ -951,9 +948,9 @@ config NUMA
          local memory controller of the CPU and add some more
          NUMA awareness to the kernel.
 
-         For i386 this is currently highly experimental and should be only
+         For 32-bit this is currently highly experimental and should be only
          used for kernel development. It might also cause boot failures.
-         For x86_64 this is recommended on all multiprocessor Opteron systems.
+         For 64-bit this is recommended on all multiprocessor Opteron systems.
          If the system is EM64T, you should say N unless your system is
          EM64T NUMA.
 
@@ -996,17 +993,10 @@ config NUMA_EMU
          into virtual nodes when booted with "numa=fake=N", where N is the
          number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
 config NODES_SHIFT
-       int
-       default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
-       int "Maximum NUMA Nodes (as a power of 2)"
+       int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
        range 1 9   if X86_64
+       default "9" if MAXSMP
        default "6" if X86_64
        default "4" if X86_NUMAQ
        default "3"
@@ -1014,7 +1004,6 @@ config NODES_SHIFT
        help
          Specify the maximum number of NUMA Nodes available on the target
          system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
        def_bool y
@@ -1073,6 +1062,26 @@ config HIGHPTE
          low memory.  Setting this option will put user-space page table
          entries in high memory.
 
+config X86_RESERVE_LOW_64K
+        bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+       default y
+       help
+        Reserve the first 64K of physical RAM on BIOSes that are known
+        to potentially corrupt that memory range. A numbers of BIOSes are
+        known to utilize this area during suspend/resume, so it must not
+        be used by the kernel.
+
+        Set this to N if you are absolutely sure that you trust the BIOS
+        to get all its memory reservations and usages right.
+
+        If you have doubts about the BIOS (e.g. suspend/resume does not
+        work or there's kernel crashes after certain hardware hotplug
+        events) and it's not AMI or Phoenix, then you might want to enable
+        X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+        corruption patterns.
+
+        Say Y if unsure.
+
 config MATH_EMULATION
        bool
        prompt "Math emulation" if X86_32
@@ -1263,7 +1272,7 @@ config KEXEC
          strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-       bool "kernel crash dumps (EXPERIMENTAL)"
+       bool "kernel crash dumps"
        depends on X86_64 || (X86_32 && HIGHMEM)
        help
          Generate crash dump after being started by kexec.