remove the v850 port

[pandora-kernel.git] / arch / v850 / kernel / as85ep1.ld

diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644 (file)
index ef2c439..0000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-       /* 1MB of internal instruction memory. */
-       iMEM0 : ORIGIN = 0,          LENGTH = 0x00100000
-
-       /* 1MB of static RAM.  */
-       SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-       /* About 58MB of DRAM.  This can actually be at one of two
-          positions, determined by jump JP3; we have to use the first
-          position because the second is partially out of processor
-          instruction addressing range (though in the second position
-          there's actually 64MB available).  */
-       SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-       .resetv : {
-               __intv_start = . ;
-                       *(.intv.reset)  /* Reset vector */
-       } > iMEM0
-
-       .sram : {
-               RAMK_KRAM_CONTENTS
-
-               /* We stick most of the interrupt vectors here; they'll be
-                  copied into the proper location by the early init code (we
-                  can't put them directly in the right place because of
-                  hardware bugs).  The vectors shouldn't need to be
-                  relocated, so we don't have to use `> ...  AT> ...' to
-                  split the load/vm addresses (and we can't because of
-                  problems with the loader).  */
-               . = ALIGN (0x10) ;
-               __intv_copy_src_start = . ;
-                       *(.intv.common) /* Vectors common to all v850e proc. */
-                       *(.intv.mach)   /* Machine-specific int. vectors.  */
-               . = ALIGN (0x10) ;
-               __intv_copy_src_end = . ;
-       } > SRAM
-
-       /* Where we end up putting the vectors.  */
-       __intv_copy_dst_start = 0x10 ;
-       __intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-       __intv_end = __intv_copy_dst_end ;
-
-       .root : { ROOT_FS_CONTENTS } > SDRAM
-}