#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/onenand.h>
#include <linux/delay.h>
},
};
+const static struct fb_videomode kfr2r09_lcdc_modes[] = {
+ {
+ .name = "TX07D34VM0AAA",
+ .xres = 240,
+ .yres = 400,
+ .left_margin = 0,
+ .right_margin = 16,
+ .hsync_len = 8,
+ .upper_margin = 0,
+ .lower_margin = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ },
+};
+
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
- .lcd_cfg = {
- .name = "TX07D34VM0AAA",
- .xres = 240,
- .yres = 400,
- .left_margin = 0,
- .right_margin = 16,
- .hsync_len = 8,
- .upper_margin = 0,
- .lower_margin = 1,
- .vsync_len = 1,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- },
+ .lcd_cfg = kfr2r09_lcdc_modes,
+ .num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
.lcd_size_cfg = {
.width = 35,
.height = 58,
.power = camera_power,
.board_info = &kfr2r09_i2c_camera,
.i2c_adapter_id = 1,
- .module_name = "rj54n1cb0c",
.priv = &rj54n1_priv,
};
},
};
+static struct sh_mobile_sdhi_info sh7724_sdhi0_data = {
+ .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
+ .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
+};
+
static struct platform_device kfr2r09_sh_sdhi0_device = {
.name = "sh_mobile_sdhi",
.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
.resource = kfr2r09_sh_sdhi0_resources,
+ .dev = {
+ .platform_data = &sh7724_sdhi0_data,
+ },
.archdata = {
.hwblk_id = HWBLK_SDHI0,
},