#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
.irq = IRQ0,
};
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
/* SDHI0 */
static void sdhi0_set_pwr(struct platform_device *pdev, int state)
{
[0] = {
.name = "SDHI0",
.start = 0x04ce0000,
- .end = 0x04ce01ff,
+ .end = 0x04ce00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
[0] = {
.name = "SDHI1",
.start = 0x04cf0000,
- .end = 0x04cf01ff,
+ .end = 0x04cf00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
&ceu0_device,
&ceu1_device,
&keysc_device,
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
&sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF)
&sdhi1_device,
return;
}
- /* read MAC address frome EEPROM */
+ /* read MAC address from EEPROM */
for (i = 0; i < sizeof(pd->mac_addr); i++) {
pd->mac_addr[i] = mac_read(a, 0x10 + i);
msleep(10);
/* enable TouchScreen */
i2c_register_board_info(0, &ts_i2c_clients, 1);
- set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+ irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
}
/* enable CEU0 */
gpio_direction_input(GPIO_PTR5);
gpio_direction_input(GPIO_PTR6);
-#ifdef CONFIG_MFD_SH_MOBILE_SDHI
+#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE)
/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
gpio_request(GPIO_FN_SDHI0CD, NULL);
gpio_request(GPIO_FN_SDHI0WP, NULL);