* 2 of the License, or (at your option) any later version.
*/
-#define SECONDARY_PROCESSORS
-
#include <linux/config.h>
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/naca.h>
#include <asm/systemcfg.h>
#include <asm/ppc_asm.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
#include <asm/bug.h>
#include <asm/cputable.h>
#include <asm/setup.h>
#define DO_SOFT_DISABLE
#endif
-/*
- * hcall interface to pSeries LPAR
- */
-#define H_SET_ASR 0x30
-
/*
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
* 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x3fff : Interrupt support
- * 0x4000 - 0x4fff : NACA
- * 0x6000 : iSeries and common interrupt prologs
- * 0x9000 - 0x9fff : Initial segment table
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 - : Early init and support code
*/
/*
/* Catch branch to 0 in real mode */
trap
+
#ifdef CONFIG_PPC_ISERIES
/*
* At offset 0x20, there is a pointer to iSeries LPAR data.
.llong hvReleaseData-KERNELBASE
/*
- * At offset 0x28 and 0x30 are offsets to the msChunks
+ * At offset 0x28 and 0x30 are offsets to the mschunks_map
* array (used by the iSeries LPAR debugger to do translation
* between physical addresses and absolute addresses) and
* to the pidhash table (also used by the debugger)
*/
- .llong msChunks-KERNELBASE
+ .llong mschunks_map-KERNELBASE
.llong 0 /* pidhash-KERNELBASE SFRXXX */
/* Offset 0x38 - Pointer to start of embedded System.map */
embedded_sysmap_end:
.llong 0
-#else /* CONFIG_PPC_ISERIES */
+#endif /* CONFIG_PPC_ISERIES */
/* Secondary processors spin on this value until it goes to 1. */
.globl __secondary_hold_spinloop
std r24,__secondary_hold_acknowledge@l(0)
sync
- /* All secondary cpu's wait here until told to start. */
+ /* All secondary cpus wait here until told to start. */
100: ld r4,__secondary_hold_spinloop@l(0)
cmpdi 0,r4,1
bne 100b
BUG_OPCODE
#endif
#endif
-#endif
/* This value is used to mark exception frames on the stack. */
.section ".toc","aw"
STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+ . = 0x3000
+
+/*** pSeries interrupt support ***/
+
/* moved from 0xf00 */
- STD_EXCEPTION_PSERIES(0x3000, performance_monitor)
+ STD_EXCEPTION_PSERIES(., performance_monitor)
- . = 0x3100
+ .align 7
_GLOBAL(do_stab_bolted_pSeries)
mtcrf 0x80,r12
mfspr r12,SPRG2
EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
-
- /* Space for the naca. Architected to be located at real address
- * NACA_PHYS_ADDR. Various tools rely on this location being fixed.
- * The first dword of the naca is required by iSeries LPAR to
- * point to itVpdAreas. On pSeries native, this value is not used.
- */
- . = NACA_PHYS_ADDR
- .globl __end_interrupts
-__end_interrupts:
-#ifdef CONFIG_PPC_ISERIES
- .globl naca
-naca:
- .llong itVpdAreas
- .llong 0 /* xRamDisk */
- .llong 0 /* xRamDiskSize */
+/*
+ * Vectors for the FWNMI option. Share common code.
+ */
+ .globl system_reset_fwnmi
+system_reset_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
- . = 0x6100
+ .globl machine_check_fwnmi
+machine_check_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+#ifdef CONFIG_PPC_ISERIES
/*** ISeries-LPAR interrupt handlers ***/
STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC)
cmpwi 0,r23,0
beq iSeries_secondary_smp_loop /* Loop until told to go */
-#ifdef SECONDARY_PROCESSORS
bne .__secondary_start /* Loop until told to go */
-#endif
iSeries_secondary_smp_loop:
/* Let the Hypervisor know we are alive */
/* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
ld r13,PACA_EXGEN+EX_R13(r13)
rfid
b . /* prevent speculative execution */
-#endif
-
-/*
- * Data area reserved for FWNMI option.
- */
- .= 0x7000
- .globl fwnmi_data_area
-fwnmi_data_area:
-
-#ifdef CONFIG_PPC_ISERIES
- . = LPARMAP_PHYS
-#include "lparmap.s"
#endif /* CONFIG_PPC_ISERIES */
-/*
- * Vectors for the FWNMI option. Share common code.
- */
- . = 0x8000
- .globl system_reset_fwnmi
-system_reset_fwnmi:
- HMT_MEDIUM
- mtspr SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
- EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
- .globl machine_check_fwnmi
-machine_check_fwnmi:
- HMT_MEDIUM
- mtspr SPRG1,r13 /* save r13 */
- RUNLATCH_ON(r13)
- EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
-
- /*
- * Space for the initial segment table
- * For LPAR, the hypervisor must fill in at least one entry
- * before we get control (with relocate on)
- */
- . = STAB0_PHYS_ADDR
- .globl __start_stab
-__start_stab:
-
- . = (STAB0_PHYS_ADDR + PAGE_SIZE)
- .globl __end_stab
-__end_stab:
-
-
/*** Common interrupt handlers ***/
STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
* R9 contains the saved CR, r13 points to the paca,
* r10 contains the (bad) kernel stack pointer,
* r11 and r12 contain the saved SRR0 and SRR1.
- * We switch to using the paca guard page as an emergency stack,
- * save the registers there, and call kernel_bad_stack(), which panics.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
*/
bad_stack:
ld r1,PACAEMERGSP(r13)
bl .kernel_fp_unavailable_exception
BUG_OPCODE
+/*
+ * load_up_fpu(unused, unused, tsk)
+ * Disable FP for the task which had the FPU previously,
+ * and save its floating-point registers in its thread_struct.
+ * Enables the FPU for use in the kernel on return.
+ * On SMP we know the fpu is free, since we give it up every
+ * switch (ie, no lazy save of the FP registers).
+ * On entry: r13 == 'current' && last_task_used_math != 'current'
+ */
+_STATIC(load_up_fpu)
+ mfmsr r5 /* grab the current MSR */
+ ori r5,r5,MSR_FP
+ mtmsrd r5 /* enable use of fpu now */
+ isync
+/*
+ * For SMP, we don't do lazy FPU switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_fpu in switch_to.
+ *
+ */
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_math@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Save FP state to last_task_used_math's THREAD struct */
+ addi r4,r4,THREAD
+ SAVE_32FPRS(0, r4)
+ mffs fr0
+ stfd fr0,THREAD_FPSCR(r4)
+ /* Disable FP for last_task_used_math */
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ li r6,MSR_FP|MSR_FE0|MSR_FE1
+ andc r4,r4,r6
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* enable use of FP after return */
+ ld r4,PACACURRENT(r13)
+ addi r5,r4,THREAD /* Get THREAD */
+ ld r4,THREAD_FPEXC_MODE(r5)
+ ori r12,r12,MSR_FP
+ or r12,r12,r4
+ std r12,_MSR(r1)
+ lfd fr0,THREAD_FPSCR(r5)
+ mtfsf 0xff,fr0
+ REST_32FPRS(0, r5)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ subi r4,r5,THREAD /* Back to 'current' */
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ b fast_exception_return
+
.align 7
.globl altivec_unavailable_common
altivec_unavailable_common:
bl .altivec_unavailable_exception
b .ret_from_except
+#ifdef CONFIG_ALTIVEC
+/*
+ * load_up_altivec(unused, unused, tsk)
+ * Disable VMX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ * On SMP we know the VMX is free, since we give it up every
+ * switch (ie, no lazy save of the vector registers).
+ * On entry: r13 == 'current' && last_task_used_altivec != 'current'
+ */
+_STATIC(load_up_altivec)
+ mfmsr r5 /* grab the current MSR */
+ oris r5,r5,MSR_VEC@h
+ mtmsrd r5 /* enable use of VMX now */
+ isync
+
+/*
+ * For SMP, we don't do lazy VMX switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_altvec in switch_to.
+ * VRSAVE isn't dealt with here, that is done in the normal context
+ * switch code. Note that we could rely on vrsave value to eventually
+ * avoid saving all of the VREGs here...
+ */
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_altivec@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Save VMX state to last_task_used_altivec's THREAD struct */
+ addi r4,r4,THREAD
+ SAVE_32VRS(0,r5,r4)
+ mfvscr vr0
+ li r10,THREAD_VSCR
+ stvx vr0,r10,r4
+ /* Disable VMX for last_task_used_altivec */
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r6,MSR_VEC@h
+ andc r4,r4,r6
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* Hack: if we get an altivec unavailable trap with VRSAVE
+ * set to all zeros, we assume this is a broken application
+ * that fails to set it properly, and thus we switch it to
+ * all 1's
+ */
+ mfspr r4,SPRN_VRSAVE
+ cmpdi 0,r4,0
+ bne+ 1f
+ li r4,-1
+ mtspr SPRN_VRSAVE,r4
+1:
+ /* enable use of VMX after return */
+ ld r4,PACACURRENT(r13)
+ addi r5,r4,THREAD /* Get THREAD */
+ oris r12,r12,MSR_VEC@h
+ std r12,_MSR(r1)
+ li r4,1
+ li r10,THREAD_VSCR
+ stw r4,THREAD_USED_VR(r5)
+ lvx vr0,r10,r5
+ mtvscr vr0
+ REST_32VRS(0,r4,r5)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ subi r4,r5,THREAD /* Back to 'current' */
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ b fast_exception_return
+#endif /* CONFIG_ALTIVEC */
+
/*
* Hash table stuff
*/
bl .unrecoverable_exception
b 1b
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on). The address is give to the hv
+ * as a page number (see xLparMap in LparData.c), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+ . = STAB0_PHYS_ADDR /* 0x6000 */
+ .globl initial_stab
+initial_stab:
+ .space 4096
+
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+ .= 0x7000
+ .globl fwnmi_data_area
+fwnmi_data_area:
+
+ /* iSeries does not use the FWNMI stuff, so it is safe to put
+ * this here, even if we later allow kernels that will boot on
+ * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+#include "lparmap.s"
+/*
+ * This ".text" is here for old compilers that generate a trailing
+ * .note section when compiling .c files to .s
+ */
+ .text
+#endif /* CONFIG_PPC_ISERIES */
+
+ . = 0x8000
/*
* On pSeries, secondary processors spin in the following code.
b .kexec_wait /* next kernel might do better */
2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */
- /* From now on, r24 is expected to be logica cpuid */
+ /* From now on, r24 is expected to be logical cpuid */
mr r24,r5
3: HMT_LOW
lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
cmpwi 0,r23,0
#ifdef CONFIG_SMP
-#ifdef SECONDARY_PROCESSORS
bne .__secondary_start
-#endif
#endif
b 3b /* Loop until told to go */
.align 8
copy_to_here:
-/*
- * load_up_fpu(unused, unused, tsk)
- * Disable FP for the task which had the FPU previously,
- * and save its floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- * On SMP we know the fpu is free, since we give it up every
- * switch (ie, no lazy save of the FP registers).
- * On entry: r13 == 'current' && last_task_used_math != 'current'
- */
-_STATIC(load_up_fpu)
- mfmsr r5 /* grab the current MSR */
- ori r5,r5,MSR_FP
- mtmsrd r5 /* enable use of fpu now */
- isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_fpu in switch_to.
- *
- */
-#ifndef CONFIG_SMP
- ld r3,last_task_used_math@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Save FP state to last_task_used_math's THREAD struct */
- addi r4,r4,THREAD
- SAVE_32FPRS(0, r4)
- mffs fr0
- stfd fr0,THREAD_FPSCR(r4)
- /* Disable FP for last_task_used_math */
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r6,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r6
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* enable use of FP after return */
- ld r4,PACACURRENT(r13)
- addi r5,r4,THREAD /* Get THREAD */
- ld r4,THREAD_FPEXC_MODE(r5)
- ori r12,r12,MSR_FP
- or r12,r12,r4
- std r12,_MSR(r1)
- lfd fr0,THREAD_FPSCR(r5)
- mtfsf 0xff,fr0
- REST_32FPRS(0, r5)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- subi r4,r5,THREAD /* Back to 'current' */
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- b fast_exception_return
-
-/*
- * disable_kernel_fp()
- * Disable the FPU.
- */
-_GLOBAL(disable_kernel_fp)
- mfmsr r3
- rldicl r0,r3,(63-MSR_FP_LG),1
- rldicl r3,r0,(MSR_FP_LG+1),0
- mtmsrd r3 /* disable use of fpu now */
- isync
- blr
-
-/*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
- * Enables the FPU for use in the kernel on return.
- */
-_GLOBAL(giveup_fpu)
- mfmsr r5
- ori r5,r5,MSR_FP
- mtmsrd r5 /* enable use of fpu now */
- isync
- cmpdi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- ld r5,PT_REGS(r3)
- cmpdi 0,r5,0
- SAVE_32FPRS(0, r3)
- mffs fr0
- stfd fr0,THREAD_FPSCR(r3)
- beq 1f
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- li r3,MSR_FP|MSR_FE0|MSR_FE1
- andc r4,r4,r3 /* disable FP for previous task */
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- ld r4,last_task_used_math@got(r2)
- std r5,0(r4)
-#endif /* CONFIG_SMP */
- blr
-
-
-#ifdef CONFIG_ALTIVEC
-
-/*
- * load_up_altivec(unused, unused, tsk)
- * Disable VMX for the task which had it previously,
- * and save its vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- * On SMP we know the VMX is free, since we give it up every
- * switch (ie, no lazy save of the vector registers).
- * On entry: r13 == 'current' && last_task_used_altivec != 'current'
- */
-_STATIC(load_up_altivec)
- mfmsr r5 /* grab the current MSR */
- oris r5,r5,MSR_VEC@h
- mtmsrd r5 /* enable use of VMX now */
- isync
-
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another. Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
- ld r3,last_task_used_altivec@got(r2)
- ld r4,0(r3)
- cmpdi 0,r4,0
- beq 1f
- /* Save VMX state to last_task_used_altivec's THREAD struct */
- addi r4,r4,THREAD
- SAVE_32VRS(0,r5,r4)
- mfvscr vr0
- li r10,THREAD_VSCR
- stvx vr0,r10,r4
- /* Disable VMX for last_task_used_altivec */
- ld r5,PT_REGS(r4)
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r6,MSR_VEC@h
- andc r4,r4,r6
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
- /* Hack: if we get an altivec unavailable trap with VRSAVE
- * set to all zeros, we assume this is a broken application
- * that fails to set it properly, and thus we switch it to
- * all 1's
- */
- mfspr r4,SPRN_VRSAVE
- cmpdi 0,r4,0
- bne+ 1f
- li r4,-1
- mtspr SPRN_VRSAVE,r4
-1:
- /* enable use of VMX after return */
- ld r4,PACACURRENT(r13)
- addi r5,r4,THREAD /* Get THREAD */
- oris r12,r12,MSR_VEC@h
- std r12,_MSR(r1)
- li r4,1
- li r10,THREAD_VSCR
- stw r4,THREAD_USED_VR(r5)
- lvx vr0,r10,r5
- mtvscr vr0
- REST_32VRS(0,r4,r5)
-#ifndef CONFIG_SMP
- /* Update last_task_used_math to 'current' */
- subi r4,r5,THREAD /* Back to 'current' */
- std r4,0(r3)
-#endif /* CONFIG_SMP */
- /* restore registers and return */
- b fast_exception_return
-
-/*
- * disable_kernel_altivec()
- * Disable the VMX.
- */
-_GLOBAL(disable_kernel_altivec)
- mfmsr r3
- rldicl r0,r3,(63-MSR_VEC_LG),1
- rldicl r3,r0,(MSR_VEC_LG+1),0
- mtmsrd r3 /* disable use of VMX now */
- isync
- blr
-
-/*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
- */
-_GLOBAL(giveup_altivec)
- mfmsr r5
- oris r5,r5,MSR_VEC@h
- mtmsrd r5 /* enable use of VMX now */
- isync
- cmpdi 0,r3,0
- beqlr- /* if no previous owner, done */
- addi r3,r3,THREAD /* want THREAD of task */
- ld r5,PT_REGS(r3)
- cmpdi 0,r5,0
- SAVE_32VRS(0,r4,r3)
- mfvscr vr0
- li r4,THREAD_VSCR
- stvx vr0,r4,r3
- beq 1f
- ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
- lis r3,MSR_VEC@h
- andc r4,r4,r3 /* disable FP for previous task */
- std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
- li r5,0
- ld r4,last_task_used_altivec@got(r2)
- std r5,0(r4)
-#endif /* CONFIG_SMP */
- blr
-
-#endif /* CONFIG_ALTIVEC */
-
#ifdef CONFIG_SMP
#ifdef CONFIG_PPC_PMAC
/*
#else
/* set the ASR */
ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
lwz r3,PLATFORM(r3) /* r3 = platform flags */
- cmpldi r3,PLATFORM_PSERIES_LPAR
+ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */
bne 98f
mfspr r3,PVR
srwi r3,r3,16
ld r3,PACASTABREAL(r13)
ori r4,r3,1 /* turn on valid bit */
ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
lwz r3,PLATFORM(r3) /* r3 = platform flags */
- cmpldi r3,PLATFORM_PSERIES_LPAR
+ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */
bne 98f
mfspr r3,PVR
srwi r3,r3,16
99:
/* Set SDR1 (hash table pointer) */
ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
lwz r3,PLATFORM(r3) /* r3 = platform flags */
/* Test if bit 0 is set (LPAR bit) */
- andi. r3,r3,0x1
+ andi. r3,r3,PLATFORM_LPAR
bne 98f
LOADADDR(r6,_SDR1) /* Only if NOT LPAR */
sub r6,r6,r26
bl .start_kernel
-_GLOBAL(__setup_cpu_power3)
- blr
-
_GLOBAL(hmt_init)
#ifdef CONFIG_HMT
LOADADDR(r5, hmt_thread_data)
/*
* We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
+ * This stuff goes at the beginning of the bss, which is page-aligned.
*/
- .data
+ .section ".bss"
+
.align 12
- .globl sdata
-sdata:
+
.globl empty_zero_page
empty_zero_page:
- .space 4096
+ .space PAGE_SIZE
.globl swapper_pg_dir
swapper_pg_dir:
- .space 4096
+ .space PAGE_SIZE
/*
* This space gets a copy of optional info passed to us by the bootstrap
git.openpandora.org / pandora-kernel.git / blobdiff