+++ /dev/null
-/*
- * Definitions for Artesyn Katana750i/3750 board.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64 KB and start
- * on a boundary that is a multiple of the window size):
- *
- * 0xff800000-0xffffffff - Boot window
- * 0xf8400000-0xf843ffff - Internal SRAM
- * 0xf8200000-0xf83fffff - CPLD
- * 0xf8100000-0xf810ffff - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- * 0xf8000000-0xf80fffff - Socketed FLASH
- * 0xe0000000-0xefffffff - Soldered FLASH
- * 0xc0000000-0xc3ffffff - PCI I/O (second hose)
- * 0x80000000-0xbfffffff - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_KATANA_H
-#define __PPC_PLATFORMS_KATANA_H
-
-/* CPU Physical Memory Map setup. */
-#define KATANA_BOOT_WINDOW_BASE 0xff800000
-#define KATANA_BOOT_WINDOW_SIZE 0x00800000 /* 8 MB */
-#define KATANA_INTERNAL_SRAM_BASE 0xf8400000
-#define KATANA_CPLD_BASE 0xf8200000
-#define KATANA_CPLD_SIZE 0x00200000 /* 2 MB */
-#define KATANA_SOCKET_BASE 0xf8000000
-#define KATANA_SOCKETED_FLASH_SIZE 0x00100000 /* 1 MB */
-#define KATANA_SOLDERED_FLASH_BASE 0xe0000000
-#define KATANA_SOLDERED_FLASH_SIZE 0x10000000 /* 256 MB */
-
-#define KATANA_PCI1_MEM_START_PROC_ADDR 0x80000000
-#define KATANA_PCI1_MEM_START_PCI_HI_ADDR 0x00000000
-#define KATANA_PCI1_MEM_START_PCI_LO_ADDR 0x80000000
-#define KATANA_PCI1_MEM_SIZE 0x40000000 /* 1 GB */
-#define KATANA_PCI1_IO_START_PROC_ADDR 0xc0000000
-#define KATANA_PCI1_IO_START_PCI_ADDR 0x00000000
-#define KATANA_PCI1_IO_SIZE 0x04000000 /* 64 MB */
-
-/* Board-specific IRQ info */
-#define KATANA_PCI_INTA_IRQ_3750 (64+8)
-#define KATANA_PCI_INTB_IRQ_3750 (64+9)
-#define KATANA_PCI_INTC_IRQ_3750 (64+10)
-
-#define KATANA_PCI_INTA_IRQ_750i (64+8)
-#define KATANA_PCI_INTB_IRQ_750i (64+9)
-#define KATANA_PCI_INTC_IRQ_750i (64+10)
-#define KATANA_PCI_INTD_IRQ_750i (64+14)
-
-#define KATANA_CPLD_RST_EVENT 0x00000000
-#define KATANA_CPLD_RST_CMD 0x00001000
-#define KATANA_CPLD_PCI_ERR_INT_EN 0x00002000
-#define KATANA_CPLD_PCI_ERR_INT_PEND 0x00003000
-#define KATANA_CPLD_PRODUCT_ID 0x00004000
-#define KATANA_CPLD_EREADY 0x00005000
-
-#define KATANA_CPLD_HARDWARE_VER 0x00007000
-#define KATANA_CPLD_PLD_VER 0x00008000
-#define KATANA_CPLD_BD_CFG_0 0x00009000
-#define KATANA_CPLD_BD_CFG_1 0x0000a000
-#define KATANA_CPLD_BD_CFG_3 0x0000c000
-#define KATANA_CPLD_LED 0x0000d000
-#define KATANA_CPLD_RESET_OUT 0x0000e000
-
-#define KATANA_CPLD_RST_EVENT_INITACT 0x80
-#define KATANA_CPLD_RST_EVENT_SW 0x40
-#define KATANA_CPLD_RST_EVENT_WD 0x20
-#define KATANA_CPLD_RST_EVENT_COPS 0x10
-#define KATANA_CPLD_RST_EVENT_COPH 0x08
-#define KATANA_CPLD_RST_EVENT_CPCI 0x02
-#define KATANA_CPLD_RST_EVENT_FP 0x01
-
-#define KATANA_CPLD_RST_CMD_SCL 0x80
-#define KATANA_CPLD_RST_CMD_SDA 0x40
-#define KATANA_CPLD_RST_CMD_I2C 0x10
-#define KATANA_CPLD_RST_CMD_FR 0x08
-#define KATANA_CPLD_RST_CMD_SR 0x04
-#define KATANA_CPLD_RST_CMD_HR 0x01
-
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK 0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_200 0x00
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_166 0x80
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_133 0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_100 0x40
-
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK 0x03
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB 0x00
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB 0x01
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB 0x02
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB 0x03
-
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK 0x04
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE 0x00
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO 0x04
-
-#define KATANA_CPLD_BD_CFG_3_MONARCH 0x04
-
-#define KATANA_CPLD_RESET_OUT_PORTSEL 0x80
-#define KATANA_CPLD_RESET_OUT_WD 0x20
-#define KATANA_CPLD_RESET_OUT_COPH 0x08
-#define KATANA_CPLD_RESET_OUT_PCI_RST_PCI 0x02
-#define KATANA_CPLD_RESET_OUT_PCI_RST_FP 0x01
-
-#define KATANA_MBOX_RESET_REQUEST 0xC83A
-#define KATANA_MBOX_RESET_ACK 0xE430
-#define KATANA_MBOX_RESET_DONE 0x32E5
-
-#define HSL_PLD_BASE 0x00010000
-#define HSL_PLD_J4SGA_REG_OFF 0
-#define HSL_PLD_J4GA_REG_OFF 1
-#define HSL_PLD_J2GA_REG_OFF 2
-#define HSL_PLD_HOT_SWAP_OFF 6
-#define HSL_PLD_HOT_SWAP_LED_BIT 0x1
-#define GA_MASK 0x1f
-#define HSL_PLD_SIZE 0x1000
-#define K3750_GPP_GEO_ADDR_PINS 0xf8000000
-#define K3750_GPP_GEO_ADDR_SHIFT 27
-
-#define K3750_GPP_EVENT_PROC_0 (1 << 21)
-#define K3750_GPP_EVENT_PROC_1_2 (1 << 2)
-
-#define PCI_VENDOR_ID_ARTESYN 0x1223
-#define PCI_DEVICE_ID_KATANA_3750_PROC0 0x0041
-#define PCI_DEVICE_ID_KATANA_3750_PROC1 0x0042
-#define PCI_DEVICE_ID_KATANA_3750_PROC2 0x0043
-
-#define COPROC_MEM_FUNCTION 0
-#define COPROC_MEM_BAR 0
-#define COPROC_REGS_FUNCTION 0
-#define COPROC_REGS_BAR 4
-#define COPROC_FLASH_FUNCTION 2
-#define COPROC_FLASH_BAR 4
-
-#define KATANA_IPMB_LOCAL_I2C_ADDR 0x08
-
-#define KATANA_DEFAULT_BAUD 9600
-#define KATANA_MPSC_CLK_SRC 8 /* TCLK */
-
-#define KATANA_MTD_MONITOR_SIZE (1 << 20) /* 1 MB */
-
-#define KATANA_ETH0_PHY_ADDR 12
-#define KATANA_ETH1_PHY_ADDR 11
-#define KATANA_ETH2_PHY_ADDR 4
-
-#define KATANA_PRODUCT_ID_3750 0x01
-#define KATANA_PRODUCT_ID_750i 0x02
-#define KATANA_PRODUCT_ID_752i 0x04
-
-#define KATANA_ETH_TX_QUEUE_SIZE 800
-#define KATANA_ETH_RX_QUEUE_SIZE 400
-
-#define KATANA_ETH_PORT_CONFIG_VALUE \
- ETH_UNICAST_NORMAL_MODE | \
- ETH_DEFAULT_RX_QUEUE_0 | \
- ETH_DEFAULT_RX_ARP_QUEUE_0 | \
- ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \
- ETH_RECEIVE_BC_IF_IP | \
- ETH_RECEIVE_BC_IF_ARP | \
- ETH_CAPTURE_TCP_FRAMES_DIS | \
- ETH_CAPTURE_UDP_FRAMES_DIS | \
- ETH_DEFAULT_RX_TCP_QUEUE_0 | \
- ETH_DEFAULT_RX_UDP_QUEUE_0 | \
- ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define KATANA_ETH_PORT_CONFIG_EXTEND_VALUE \
- ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \
- ETH_PARTITION_DISABLE
-
-#define GT_ETH_IPG_INT_RX(value) \
- ((value & 0x3fff) << 8)
-
-#define KATANA_ETH_PORT_SDMA_CONFIG_VALUE \
- ETH_RX_BURST_SIZE_4_64BIT | \
- GT_ETH_IPG_INT_RX(0) | \
- ETH_TX_BURST_SIZE_4_64BIT
-
-#define KATANA_ETH_PORT_SERIAL_CONTROL_VALUE \
- ETH_FORCE_LINK_PASS | \
- ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \
- ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
- ETH_ADV_SYMMETRIC_FLOW_CTRL | \
- ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
- ETH_FORCE_BP_MODE_NO_JAM | \
- BIT9 | \
- ETH_DO_NOT_FORCE_LINK_FAIL | \
- ETH_RETRANSMIT_16_ATTEMPTS | \
- ETH_ENABLE_AUTO_NEG_SPEED_GMII | \
- ETH_DTE_ADV_0 | \
- ETH_DISABLE_AUTO_NEG_BYPASS | \
- ETH_AUTO_NEG_NO_CHANGE | \
- ETH_MAX_RX_PACKET_9700BYTE | \
- ETH_CLR_EXT_LOOPBACK | \
- ETH_SET_FULL_DUPLEX_MODE | \
- ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-#ifndef __ASSEMBLY__
-
-typedef enum {
- KATANA_ID_3750,
- KATANA_ID_750I,
- KATANA_ID_752I,
- KATANA_ID_MAX
-} katana_id_t;
-
-#endif
-
-static inline u32
-katana_bus_freq(void __iomem *cpld_base)
-{
- u8 bd_cfg_0;
-
- bd_cfg_0 = in_8(cpld_base + KATANA_CPLD_BD_CFG_0);
-
- switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
- case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
- return 200000000;
- break;
-
- case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
- return 166666666;
- break;
-
- case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
- return 133333333;
- break;
-
- case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
- return 100000000;
- break;
-
- default:
- return 133333333;
- break;
- }
-}
-
-#endif /* __PPC_PLATFORMS_KATANA_H */
git.openpandora.org / pandora-kernel.git / blobdiff