powerpc: Remove arch/ppc and include/asm-ppc

[pandora-kernel.git] / arch / ppc / platforms / 4xx / bamboo.h

diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
deleted file mode 100644 (file)
index dcd3d09..0000000
--- a/arch/ppc/platforms/4xx/bamboo.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Bamboo board definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_BAMBOO_H__
-#define __ASM_BAMBOO_H__
-
-#include <platforms/4xx/ibm440ep.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0               0x0EF600E00
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE                        0xfff00000
-#define PIBS_MAC_BASE                  (PIBS_FLASH_BASE+0xc0400)
-#define PIBS_MAC_SIZE                  0x200
-#define PIBS_MAC_OFFSET                        0x100
-
-/* Default clock rate */
-#define BAMBOO_TMRCLK                  25000000
-
-/* RTC/NVRAM location */
-#define BAMBOO_RTC_ADDR                        0x080000000ULL
-#define BAMBOO_RTC_SIZE                        0x2000
-
-/* FPGA Registers */
-#define BAMBOO_FPGA_ADDR               0x080002000ULL
-
-#define BAMBOO_FPGA_CONFIG2_REG_ADDR   (BAMBOO_FPGA_ADDR + 0x1)
-#define BAMBOO_FULL_DUPLEX_EN(x)       (x & 0x08)
-#define BAMBOO_FORCE_100Mbps(x)                (x & 0x04)
-#define BAMBOO_AUTONEGOTIATE(x)                (x & 0x02)
-
-#define BAMBOO_FPGA_SETTING_REG_ADDR   (BAMBOO_FPGA_ADDR + 0x3)
-#define BAMBOO_BOOT_SMALL_FLASH(x)     (!(x & 0x80))
-#define BAMBOO_LARGE_FLASH_EN(x)       (!(x & 0x40))
-#define BAMBOO_BOOT_NAND_FLASH(x)      (!(x & 0x20))
-
-#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
-#define BAMBOO_SEL_MII(x)              (x & 0x80)
-#define BAMBOO_SEL_RMII(x)             (x & 0x40)
-#define BAMBOO_SEL_SMII(x)             (x & 0x20)
-
-/* Flash */
-#define BAMBOO_SMALL_FLASH_LOW         0x087f00000ULL
-#define BAMBOO_SMALL_FLASH_HIGH                0x0fff00000ULL
-#define BAMBOO_SMALL_FLASH_SIZE                0x100000
-#define BAMBOO_LARGE_FLASH_LOW         0x087800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH1       0x0ff800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH2       0x0ffc00000ULL
-#define BAMBOO_LARGE_FLASH_SIZE                0x400000
-#define BAMBOO_SRAM_LOW                        0x087f00000ULL
-#define BAMBOO_SRAM_HIGH1              0x0fff00000ULL
-#define BAMBOO_SRAM_HIGH2              0x0ff800000ULL
-#define BAMBOO_SRAM_SIZE               0x100000
-#define BAMBOO_NAND_FLASH_REG_ADDR     0x090000000ULL
-#define BAMBOO_NAND_FLASH_REG_SIZE     0x2000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE                  4
-
-#define UART0_IO_BASE                  0xEF600300
-#define UART1_IO_BASE                  0xEF600400
-#define UART2_IO_BASE                  0xEF600500
-#define UART3_IO_BASE                  0xEF600600
-
-#define BASE_BAUD                      33177600/3/16
-#define UART0_INT                      0
-#define UART1_INT                      1
-#define UART2_INT                      3
-#define UART3_INT                      4
-
-#define STD_UART_OP(num)                                       \
-       { 0, BASE_BAUD, 0, UART##num##_INT,                     \
-               (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),        \
-               iomem_base: (void*)UART##num##_IO_BASE,         \
-               io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS       \
-       STD_UART_OP(0)          \
-       STD_UART_OP(1)          \
-       STD_UART_OP(2)          \
-       STD_UART_OP(3)
-
-/* PCI support */
-#define BAMBOO_PCI_CFGA_PLB32          0xeec00000
-#define BAMBOO_PCI_CFGD_PLB32          0xeec00004
-
-#define BAMBOO_PCI_IO_BASE             0x00000000e8000000ULL
-#define BAMBOO_PCI_IO_SIZE             0x00010000
-#define BAMBOO_PCI_MEM_OFFSET          0x00000000
-#define BAMBOO_PCI_PHY_MEM_BASE                0x00000000a0000000ULL
-
-#define BAMBOO_PCI_LOWER_IO            0x00000000
-#define BAMBOO_PCI_UPPER_IO            0x0000ffff
-#define BAMBOO_PCI_LOWER_MEM           0xa0000000
-#define BAMBOO_PCI_UPPER_MEM           0xafffffff
-#define BAMBOO_PCI_MEM_BASE            0xa0000000
-
-#define BAMBOO_PCIL0_BASE              0x00000000ef400000ULL
-#define BAMBOO_PCIL0_SIZE              0x40
-
-#define BAMBOO_PCIL0_PMM0LA            0x000
-#define BAMBOO_PCIL0_PMM0MA            0x004
-#define BAMBOO_PCIL0_PMM0PCILA         0x008
-#define BAMBOO_PCIL0_PMM0PCIHA         0x00C
-#define BAMBOO_PCIL0_PMM1LA            0x010
-#define BAMBOO_PCIL0_PMM1MA            0x014
-#define BAMBOO_PCIL0_PMM1PCILA         0x018
-#define BAMBOO_PCIL0_PMM1PCIHA         0x01C
-#define BAMBOO_PCIL0_PMM2LA            0x020
-#define BAMBOO_PCIL0_PMM2MA            0x024
-#define BAMBOO_PCIL0_PMM2PCILA         0x028
-#define BAMBOO_PCIL0_PMM2PCIHA         0x02C
-#define BAMBOO_PCIL0_PTM1MS            0x030
-#define BAMBOO_PCIL0_PTM1LA            0x034
-#define BAMBOO_PCIL0_PTM2MS            0x038
-#define BAMBOO_PCIL0_PTM2LA            0x03C
-
-#endif                          /* __ASM_BAMBOO_H__ */
-#endif                          /* __KERNEL__ */