#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/reboot.h>
#include <asm/prom.h>
#include <asm/machdep.h>
*/
#define MCU_REG_CTRL 0x20
#define MCU_CTRL_POFF 0x40
+#define MCU_CTRL_BTN 0x80
#define MCU_NUM_GPIO 2
struct mcu {
struct mutex lock;
- struct device_node *np;
struct i2c_client *client;
- struct of_gpio_chip of_gc;
+ struct gpio_chip gc;
u8 reg_ctrl;
};
static struct mcu *glob_mcu;
+struct task_struct *shutdown_thread;
+static int shutdown_thread_fn(void *data)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ while (!kthread_should_stop()) {
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ pr_err("MCU status reg read failed.\n");
+ mcu->reg_ctrl = ret;
+
+
+ if (mcu->reg_ctrl & MCU_CTRL_BTN) {
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
+ mcu->reg_ctrl & ~MCU_CTRL_BTN);
+
+ ctrl_alt_del();
+ }
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ return 0;
+}
+
+static ssize_t show_status(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct mcu *mcu = glob_mcu;
+
+ ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL);
+ if (ret < 0)
+ return -ENODEV;
+ mcu->reg_ctrl = ret;
+
+ return sprintf(buf, "%02x\n", ret);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
static void mcu_power_off(void)
{
struct mcu *mcu = glob_mcu;
pr_info("Sending power-off request to the MCU...\n");
mutex_lock(&mcu->lock);
- i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL,
+ i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL,
mcu->reg_ctrl | MCU_CTRL_POFF);
mutex_unlock(&mcu->lock);
}
static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
- struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
- struct mcu *mcu = container_of(of_gc, struct mcu, of_gc);
+ struct mcu *mcu = container_of(gc, struct mcu, gc);
u8 bit = 1 << (4 + gpio);
mutex_lock(&mcu->lock);
static int mcu_gpiochip_add(struct mcu *mcu)
{
struct device_node *np;
- struct of_gpio_chip *of_gc = &mcu->of_gc;
- struct gpio_chip *gc = &of_gc->gc;
- int ret;
+ struct gpio_chip *gc = &mcu->gc;
np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx");
if (!np)
gc->base = -1;
gc->set = mcu_gpio_set;
gc->direction_output = mcu_gpio_dir_out;
- of_gc->gpio_cells = 2;
- of_gc->xlate = of_gpio_simple_xlate;
+ gc->of_node = np;
- np->data = of_gc;
- mcu->np = np;
-
- /*
- * We don't want to lose the node, its ->data and ->full_name...
- * So, if succeeded, we don't put the node here.
- */
- ret = gpiochip_add(gc);
- if (ret)
- of_node_put(np);
- return ret;
+ return gpiochip_add(gc);
}
static int mcu_gpiochip_remove(struct mcu *mcu)
{
- int ret;
-
- ret = gpiochip_remove(&mcu->of_gc.gc);
- if (ret)
- return ret;
- of_node_put(mcu->np);
-
- return 0;
+ return gpiochip_remove(&mcu->gc);
}
static int __devinit mcu_probe(struct i2c_client *client,
dev_info(&client->dev, "will provide power-off service\n");
}
+ if (device_create_file(&client->dev, &dev_attr_status))
+ dev_err(&client->dev,
+ "couldn't create device file for status\n");
+
+ shutdown_thread = kthread_run(shutdown_thread_fn, NULL,
+ "mcu-i2c-shdn");
+
return 0;
err:
kfree(mcu);
struct mcu *mcu = i2c_get_clientdata(client);
int ret;
+ kthread_stop(shutdown_thread);
+
+ device_remove_file(&client->dev, &dev_attr_status);
+
if (glob_mcu == mcu) {
ppc_md.power_off = NULL;
glob_mcu = NULL;
};
MODULE_DEVICE_TABLE(i2c, mcu_ids);
+static struct of_device_id mcu_of_match_table[] __devinitdata = {
+ { .compatible = "fsl,mcu-mpc8349emitx", },
+ { },
+};
+
static struct i2c_driver mcu_driver = {
.driver = {
.name = "mcu-mpc8349emitx",
.owner = THIS_MODULE,
+ .of_match_table = mcu_of_match_table,
},
.probe = mcu_probe,
.remove = __devexit_p(mcu_remove),