#undef DEBUG
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
+#include <linux/irq.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
-#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
* which might have be mirrored at 0x0100-0x03ff..
*/
void pcibios_align_resource(void *data, struct resource *res,
- unsigned long size, unsigned long align)
+ resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned long start = res->start;
+ resource_size_t start = res->start;
unsigned long alignto;
if (res->flags & IORESOURCE_IO) {
pci_setup_pci_controller(phb);
phb->arch_data = dev;
phb->is_dynamic = mem_init_done;
- if (dev)
+ if (dev) {
+ PHB_SET_NODE(phb, of_node_to_nid(dev));
add_linux_pci_domain(dev, phb);
+ }
return phb;
}
dev->current_state = 4; /* unknown power state */
- if (!strcmp(type, "pci")) {
+ if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
+ /* Maybe do a default OF mapping here */
dev->irq = NO_IRQ;
- if (node->n_intrs > 0) {
- dev->irq = node->intrs[0].line;
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
- dev->irq);
- }
}
pci_parse_of_addrs(node, dev);
return -EINVAL;
vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO;
vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
vma->vm_page_prot,
mmap_state, write_combine);
*/
int pci_read_irq_line(struct pci_dev *pci_dev)
{
- u8 intpin;
- struct device_node *node;
+ struct of_irq oirq;
+ unsigned int virq;
- pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin);
- if (intpin == 0)
- return 0;
+ DBG("Try to map irq for %s...\n", pci_name(pci_dev));
- node = pci_device_to_OF_node(pci_dev);
- if (node == NULL)
- return -1;
+ /* Try to get a mapping from the device-tree */
+ if (of_irq_map_pci(pci_dev, &oirq)) {
+ u8 line, pin;
- if (node->n_intrs == 0)
- return -1;
+ /* If that fails, lets fallback to what is in the config
+ * space and map that through the default controller. We
+ * also set the type to level low since that's what PCI
+ * interrupts are. If your platform does differently, then
+ * either provide a proper interrupt tree or don't use this
+ * function.
+ */
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
+ return -1;
+ if (pin == 0)
+ return -1;
+ if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
+ line == 0xff) {
+ return -1;
+ }
+ DBG(" -> no map ! Using irq line %d from PCI config\n", line);
- pci_dev->irq = node->intrs[0].line;
+ virq = irq_create_mapping(NULL, line);
+ if (virq != NO_IRQ)
+ set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
+ } else {
+ DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.controller->full_name);
- pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ }
+ if(virq == NO_IRQ) {
+ DBG(" -> failed to map !\n");
+ return -1;
+ }
+ pci_dev->irq = virq;
+ pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
return 0;
}
return -EOPNOTSUPP;
}
+
+#ifdef CONFIG_NUMA
+int pcibus_to_node(struct pci_bus *bus)
+{
+ struct pci_controller *phb = pci_bus_to_host(bus);
+ return phb->node;
+}
+EXPORT_SYMBOL(pcibus_to_node);
+#endif