--- /dev/null
+/*
+ * platform.c: platform support for PNX833X.
+ *
+ * Copyright 2008 NXP Semiconductors
+ * Chris Steel <chris.steel@nxp.com>
+ * Daniel Laird <daniel.j.laird@nxp.com>
+ *
+ * Based on software written by:
+ * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial.h>
+#include <linux/serial_pnx8xxx.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#ifdef CONFIG_I2C_PNX0105
+/* Until i2c driver available in kernel.*/
+#include <linux/i2c-pnx0105.h>
+#endif
+
+#include <irq.h>
+#include <irq-mapping.h>
+#include <pnx833x.h>
+
+static u64 uart_dmamask = DMA_32BIT_MASK;
+
+static struct resource pnx833x_uart_resources[] = {
+ [0] = {
+ .start = PNX833X_UART0_PORTS_START,
+ .end = PNX833X_UART0_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX833X_PIC_UART0_INT,
+ .end = PNX833X_PIC_UART0_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = PNX833X_UART1_PORTS_START,
+ .end = PNX833X_UART1_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [3] = {
+ .start = PNX833X_PIC_UART1_INT,
+ .end = PNX833X_PIC_UART1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct pnx8xxx_port pnx8xxx_ports[] = {
+ [0] = {
+ .port = {
+ .type = PORT_PNX8XXX,
+ .iotype = UPIO_MEM,
+ .membase = (void __iomem *)PNX833X_UART0_PORTS_START,
+ .mapbase = PNX833X_UART0_PORTS_START,
+ .irq = PNX833X_PIC_UART0_INT,
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ [1] = {
+ .port = {
+ .type = PORT_PNX8XXX,
+ .iotype = UPIO_MEM,
+ .membase = (void __iomem *)PNX833X_UART1_PORTS_START,
+ .mapbase = PNX833X_UART1_PORTS_START,
+ .irq = PNX833X_PIC_UART1_INT,
+ .uartclk = 3692300,
+ .fifosize = 16,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+};
+
+static struct platform_device pnx833x_uart_device = {
+ .name = "pnx8xxx-uart",
+ .id = -1,
+ .dev = {
+ .dma_mask = &uart_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = pnx8xxx_ports,
+ },
+ .num_resources = ARRAY_SIZE(pnx833x_uart_resources),
+ .resource = pnx833x_uart_resources,
+};
+
+static u64 ehci_dmamask = DMA_32BIT_MASK;
+
+static struct resource pnx833x_usb_ehci_resources[] = {
+ [0] = {
+ .start = PNX833X_USB_PORTS_START,
+ .end = PNX833X_USB_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX833X_PIC_USB_INT,
+ .end = PNX833X_PIC_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pnx833x_usb_ehci_device = {
+ .name = "pnx833x-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+ .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources),
+ .resource = pnx833x_usb_ehci_resources,
+};
+
+#ifdef CONFIG_I2C_PNX0105
+static struct resource pnx833x_i2c0_resources[] = {
+ {
+ .start = PNX833X_I2C0_PORTS_START,
+ .end = PNX833X_I2C0_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PNX833X_PIC_I2C0_INT,
+ .end = PNX833X_PIC_I2C0_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource pnx833x_i2c1_resources[] = {
+ {
+ .start = PNX833X_I2C1_PORTS_START,
+ .end = PNX833X_I2C1_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PNX833X_PIC_I2C1_INT,
+ .end = PNX833X_PIC_I2C1_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
+ {
+ .base = PNX833X_I2C0_PORTS_START,
+ .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
+ .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */
+ .bus_addr = 0, /* no slave support */
+ },
+ {
+ .base = PNX833X_I2C1_PORTS_START,
+ .irq = -1, /* on high freq, polling is faster */
+ /*.irq = PNX833X_PIC_I2C1_INT,*/
+ .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
+ .bus_addr = 0, /* no slave support */
+ },
+};
+
+static struct platform_device pnx833x_i2c0_device = {
+ .name = "i2c-pnx0105",
+ .id = 0,
+ .dev = {
+ .platform_data = &pnx833x_i2c_dev[0],
+ },
+ .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
+ .resource = pnx833x_i2c0_resources,
+};
+
+static struct platform_device pnx833x_i2c1_device = {
+ .name = "i2c-pnx0105",
+ .id = 1,
+ .dev = {
+ .platform_data = &pnx833x_i2c_dev[1],
+ },
+ .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
+ .resource = pnx833x_i2c1_resources,
+};
+#endif
+
+static u64 ethernet_dmamask = DMA_32BIT_MASK;
+
+static struct resource pnx833x_ethernet_resources[] = {
+ [0] = {
+ .start = PNX8335_IP3902_PORTS_START,
+ .end = PNX8335_IP3902_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8335_PIC_ETHERNET_INT,
+ .end = PNX8335_PIC_ETHERNET_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pnx833x_ethernet_device = {
+ .name = "ip3902-eth",
+ .id = -1,
+ .dev = {
+ .dma_mask = ðernet_dmamask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ },
+ .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
+ .resource = pnx833x_ethernet_resources,
+};
+
+static struct resource pnx833x_sata_resources[] = {
+ [0] = {
+ .start = PNX8335_SATA_PORTS_START,
+ .end = PNX8335_SATA_PORTS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PNX8335_PIC_SATA_INT,
+ .end = PNX8335_PIC_SATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device pnx833x_sata_device = {
+ .name = "pnx833x-sata",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pnx833x_sata_resources),
+ .resource = pnx833x_sata_resources,
+};
+
+static const char *part_probes[] = {
+ "cmdlinepart",
+ NULL
+};
+
+static void
+pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
+ else
+ writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
+}
+
+static struct platform_nand_data pnx833x_flash_nand_data = {
+ .chip = {
+ .chip_delay = 25,
+ .part_probe_types = part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl
+ }
+};
+
+/*
+ * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
+ * 12 bytes more seems to be the standard that allows for NAND access.
+ */
+static struct resource pnx833x_flash_nand_resource = {
+ .start = PNX8335_NAND_BASE,
+ .end = PNX8335_NAND_BASE + 12,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pnx833x_flash_nand = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &pnx833x_flash_nand_resource,
+ .dev = {
+ .platform_data = &pnx833x_flash_nand_data,
+ },
+};
+
+static struct platform_device *pnx833x_platform_devices[] __initdata = {
+ &pnx833x_uart_device,
+ &pnx833x_usb_ehci_device,
+#ifdef CONFIG_I2C_PNX0105
+ &pnx833x_i2c0_device,
+ &pnx833x_i2c1_device,
+#endif
+ &pnx833x_ethernet_device,
+ &pnx833x_sata_device,
+ &pnx833x_flash_nand,
+};
+
+static int __init pnx833x_platform_init(void)
+{
+ int res;
+
+ res = platform_add_devices(pnx833x_platform_devices,
+ ARRAY_SIZE(pnx833x_platform_devices));
+
+ return res;
+}
+
+arch_initcall(pnx833x_platform_init);
git.openpandora.org / pandora-kernel.git / blobdiff