[MIPS] Remove Momentum Ocelot support.

[pandora-kernel.git] / arch / mips / gt64120 / momenco_ocelot / dbg_io.c

diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
deleted file mode 100644 (file)
index 32d6fb4..0000000
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-
-#include <asm/serial.h> /* For the serial port location and base baud */
-
-/* --- CONFIG --- */
-
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-/* --- END OF CONFIG --- */
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-
-/* [jsun] we use the second serial port for kdb */
-#define         BASE                    OCELOT_SERIAL1_BASE
-#define         MAX_BAUD                OCELOT_BASE_BAUD
-
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              4
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
-#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
-
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
-{
-       /* disable interrupts */
-       UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-       /* set up baud rate */
-       {
-               uint32 divisor;
-
-               /* set DIAB bit */
-               UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-               /* set divisor */
-               divisor = MAX_BAUD / baud;
-               UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-               UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-               /* clear DIAB bit */
-               UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-       }
-
-       /* set data format */
-       UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-uint8 getDebugChar(void)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(UART16550_BAUD_38400,
-                         UART16550_DATA_8BIT,
-                         UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-       }
-
-       while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
-       return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-
-int putDebugChar(uint8 byte)
-{
-       if (!remoteDebugInitialized) {
-               remoteDebugInitialized = 1;
-               debugInit(UART16550_BAUD_38400,
-                         UART16550_DATA_8BIT,
-                         UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-       }
-
-       while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
-       UART16550_WRITE(OFS_SEND_BUFFER, byte);
-       return 1;
-}