select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_LITTLE_ENDIAN
+config BASLER_EXCITE
+ bool "Basler eXcite smart camera support"
+ select DMA_COHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select IRQ_CPU_RM7K
+ select IRQ_CPU_RM9K
+ select SERIAL_RM9000
+ select SYS_HAS_CPU_RM9000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ help
+ The eXcite is a smart camera platform manufactured by
+ Basler Vision Technologies AG
+
+config BASLER_EXCITE_PROTOTYPE
+ bool "Support for pre-release units"
+ depends on BASLER_EXCITE
+ default n
+ help
+ Pre-series (prototype) units are different from later ones in
+ some ways. Select this option if you have one of these. Please
+ note that a kernel built with this option selected will not be
+ able to run on normal units.
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_128HZ
+ select SYS_SUPPORTS_256HZ
+ select SYS_SUPPORTS_1024HZ
help
This enables support for DEC's MIPS based workstations. For details
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
select SYS_HAS_CPU_R4X00
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+ select SYS_SUPPORTS_100HZ
help
This a family of machines based on the MIPS R4030 chipset which was
used by several vendors to build RISC/os and Windows NT workstations.
This enables support for the MIPS Technologies SEAD evaluation
board.
+config WR_PPMC
+ bool "Support for Wind River PPMC board"
+ select IRQ_CPU
+ select BOOT_ELF32
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select MIPS_GT64120
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_NEVADA
+ select SYS_HAS_CPU_RM7000
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ help
+ This enables support for the Wind River MIPS32 4KC PPMC evaluation
+ board, which is based on GT64120 bridge chip.
+
config MIPS_SIM
bool 'MIPS simulator (MIPSsim)'
select DMA_NONCOHERENT
config PNX8550_V2PCI
bool "Philips PNX8550 based Viper2-PCI board"
+ depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
config PNX8550_JBS
bool "Philips PNX8550 based JBS board"
+ depends on BROKEN
select PNX8550
select SYS_SUPPORTS_LITTLE_ENDIAN
-config DDB5074
- bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the VR5000-based NEC DDB Vrc-5074
- evaluation board.
-
-config DDB5476
- bool "NEC DDB Vrc-5476"
- select DDB5XXX_COMMON
- select DMA_NONCOHERENT
- select HAVE_STD_PC_SERIAL_PORT
- select HW_HAS_PCI
- select IRQ_CPU
- select I8259
- select ISA
- select SYS_HAS_CPU_R5432
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_LITTLE_ENDIAN
- help
- This enables support for the R5432-based NEC DDB Vrc-5476
- evaluation board.
-
- Features : kernel debugging, serial terminal, NFS root fs, on-board
- ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
- IDE controller, PS2 keyboard, PS2 mouse, etc.
-
config DDB5477
bool "NEC DDB Vrc-5477"
select DDB5XXX_COMMON
simulate actual MIPS hardware platforms. More information on Qemu
can be found at http://www.linux-mips.org/wiki/Qemu.
+config MARKEINS
+ bool "Support for NEC EMMA2RH Mark-eins"
+ select DMA_NONCOHERENT
+ select HW_HAS_PCI
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_HAS_CPU_R5000
+ help
+ This enables support for the R5432-based NEC Mark-eins
+ boards with R5500 CPU.
+
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
select HW_HAS_EISA
select IP22_CPU_SCACHE
select IRQ_CPU
+ select NO_ISA if ISA
select SWAP_IO_SPACE
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_NUMA
help
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
workstations. To compile a Linux kernel that runs on these, say Y
config SNI_RM200_PCI
bool "SNI RM200 PCI"
- select ARC
- select ARC32
+ select ARC if CPU_LITTLE_ENDIAN
+ select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select DMA_NONCOHERENT
select I8253
select I8259
select ISA
+ select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
+ select SYS_HAS_CPU_R5000
+ select R5000_CPU_SCACHE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
- select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
+ select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help
config SWAP_IO_SPACE
bool
+config EMMA2RH
+ bool
+ depends on MARKEINS
+ default y
+
#
# Unfortunately not all GT64120 systems run the chip at the same clock.
# As the user for the clock rate and try to minimize the available options.
def_bool y
depends on !NUMA
+config ARCH_DISCONTIGMEM_ENABLE
+ bool
+ default y if SGI_IP27
+ help
+ Say Y to upport efficient handling of discontiguous physical memory,
+ for architectures which are either NUMA (Non-Uniform Memory Access)
+ or have huge holes in the physical address space for other reasons.
+ See <file:Documentation/vm/numa> for more.
+
+config NUMA
+ bool "NUMA Support"
+ depends on SYS_SUPPORTS_NUMA
+ help
+ Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+ Access). This option improves performance on systems with more
+ than two nodes; on two node systems it is generally better to
+ leave it disabled; on single node systems disable this option
+ disabled.
+
+config SYS_SUPPORTS_NUMA
+ bool
+
config NODES_SHIFT
int
default "6"
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
+#
+# Timer Interrupt Frequency Configuration
+#
+
+choice
+ prompt "Timer frequency"
+ default HZ_250
+ help
+ Allows the configuration of the timer frequency.
+
+ config HZ_48
+ bool "48 HZ" if SYS_SUPPORTS_48HZ
+
+ config HZ_100
+ bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_128
+ bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_250
+ bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_256
+ bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1000
+ bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
+
+ config HZ_1024
+ bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
+
+endchoice
+
+config SYS_SUPPORTS_48HZ
+ bool
+
+config SYS_SUPPORTS_100HZ
+ bool
+
+config SYS_SUPPORTS_128HZ
+ bool
+
+config SYS_SUPPORTS_250HZ
+ bool
+
+config SYS_SUPPORTS_256HZ
+ bool
+
+config SYS_SUPPORTS_1000HZ
+ bool
+
+config SYS_SUPPORTS_1024HZ
+ bool
+
+config SYS_SUPPORTS_ARBIT_HZ
+ bool
+ default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
+ !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
+ !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+ !SYS_SUPPORTS_1024HZ
+
+config HZ
+ int
+ default 48 if HZ_48
+ default 100 if HZ_100
+ default 128 if HZ_128
+ default 250 if HZ_250
+ default 256 if HZ_256
+ default 1000 if HZ_1000
+ default 1024 if HZ_1024
+
source "kernel/Kconfig.preempt"
config RTC_DS1742
config ISA
bool
+config NO_ISA
+ bool
+
config EISA
bool "EISA support"
depends on HW_HAS_EISA
bool "Power Management support (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOC_AU1X00
+config APM
+ tristate "Advanced Power Management Emulation"
+ depends on PM
+ ---help---
+ APM is a BIOS specification for saving power using several different
+ techniques. This is mostly useful for battery powered systems with
+ APM compliant BIOSes. If you say Y here, the system time will be
+ reset after a RESUME operation, the /proc/apm device will provide
+ battery status information, and user-space programs will receive
+ notification of APM "events" (e.g. battery status change).
+
+ In order to use APM, you will need supporting software. For location
+ and more information, read <file:Documentation/pm.txt> and the
+ Battery Powered Linux mini-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ This driver does not spin down disk drives (see the hdparm(8)
+ manpage ("man 8 hdparm") for that), and it doesn't turn off
+ VESA-compliant "green" monitors.
+
+ Generally, if you don't have a battery in your machine, there isn't
+ much point in using this driver and you should say N. If you get
+ random kernel OOPSes or reboots that don't seem to be related to
+ anything, try disabling/enabling this option (or disabling/enabling
+ APM in your BIOS).
+
endmenu
source "net/Kconfig"
git.openpandora.org / pandora-kernel.git / blobdiff