* cpufreq driver for Enhanced SpeedStep, as found in Intel's Pentium
* M (part of the Centrino chipset).
*
+ * Since the original Pentium M, most new Intel CPUs support Enhanced
+ * SpeedStep.
+ *
* Despite the "SpeedStep" in the name, this is almost entirely unlike
* traditional SpeedStep.
*
* Modelled on speedstep.c
*
* Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
- *
- * WARNING WARNING WARNING
- *
- * This driver manipulates the PERF_CTL MSR, which is only somewhat
- * documented. While it seems to work on my laptop, it has not been
- * tested anywhere else, and it may not work for you, do strange
- * things or simply crash.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/config.h>
#include <linux/sched.h> /* current */
#include <linux/delay.h>
#include <linux/compiler.h>
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <acpi/processor.h>
#endif
#include <asm/cpufeature.h>
#define PFX "speedstep-centrino: "
-#define MAINTAINER "Jeremy Fitzhardinge <jeremy@goop.org>"
+#define MAINTAINER "cpufreq@lists.linux.org.uk"
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
if (model->cpu_id == NULL) {
/* No match at all */
- dprintk(KERN_INFO PFX "no support for CPU model \"%s\": "
+ dprintk("no support for CPU model \"%s\": "
"send /proc/cpuinfo to " MAINTAINER "\n",
cpu->x86_model_id);
return -ENOENT;
if (model->op_points == NULL) {
/* Matched a non-match */
- dprintk(KERN_INFO PFX "no table support for CPU model \"%s\"\n",
+ dprintk("no table support for CPU model \"%s\"\n",
cpu->x86_model_id);
#ifndef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
- dprintk(KERN_INFO PFX "try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
+ dprintk("try compiling with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled\n");
#endif
return -ENOENT;
}
unsigned int i, j;
struct acpi_processor_performance *data;
- for_each_cpu(i) {
+ for_each_possible_cpu(i) {
data = kzalloc(sizeof(struct acpi_processor_performance),
GFP_KERNEL);
if (!data) {
- for_each_cpu(j) {
+ for_each_possible_cpu(j) {
kfree(acpi_perf_data[j]);
acpi_perf_data[j] = NULL;
}
return 0;
}
+
+/*
+ * Some BIOSes do SW_ANY coordination internally, either set it up in hw
+ * or do it in BIOS firmware and won't inform about it to OS. If not
+ * detected, this has a side effect of making CPU run at a different speed
+ * than OS intended it to run at. Detect it and handle it cleanly.
+ */
+static int bios_with_sw_any_bug;
+static int __init sw_any_bug_found(struct dmi_system_id *d)
+{
+ bios_with_sw_any_bug = 1;
+ return 0;
+}
+
+
+static struct dmi_system_id sw_any_bug_dmi_table[] = {
+ {
+ .callback = sw_any_bug_found,
+ .ident = "Supermicro Server X6DLP",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
+ DMI_MATCH(DMI_BIOS_VERSION, "080010"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X6DLP"),
+ },
+ },
+ { }
+};
+
+
/*
* centrino_cpu_init_acpi - register with ACPI P-States library
*
/* register with ACPI core */
if (acpi_processor_register_performance(p, cpu)) {
- dprintk(KERN_INFO PFX "obtaining ACPI data failed\n");
+ dprintk(PFX "obtaining ACPI data failed\n");
return -EIO;
}
- policy->cpus = p->shared_cpu_map;
+
policy->shared_type = p->shared_type;
+ /*
+ * Will let policy->cpus know about dependency only when software
+ * coordination is required.
+ */
+ if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL ||
+ policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
+ policy->cpus = p->shared_cpu_map;
+ }
+
+#ifdef CONFIG_SMP
+ dmi_check_system(sw_any_bug_dmi_table);
+ if (bios_with_sw_any_bug && cpus_weight(policy->cpus) == 1) {
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+ policy->cpus = cpu_core_map[cpu];
+ }
+#endif
/* verify the acpi_data */
if (p->state_count <= 1) {
kfree(centrino_model[cpu]);
err_unreg:
acpi_processor_unregister_performance(p, cpu);
- dprintk(KERN_INFO PFX "invalid ACPI data\n");
+ dprintk(PFX "invalid ACPI data\n");
return (result);
}
#else
centrino_cpu[policy->cpu] = &cpu_ids[i];
if (!centrino_cpu[policy->cpu]) {
- dprintk(KERN_INFO PFX "found unsupported CPU with "
+ dprintk("found unsupported CPU with "
"Enhanced SpeedStep: send /proc/cpuinfo to "
MAINTAINER "\n");
return -ENODEV;
cpufreq_unregister_driver(¢rino_driver);
#ifdef CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI
- for_each_cpu(j) {
+ for_each_possible_cpu(j) {
kfree(acpi_perf_data[j]);
acpi_perf_data[j] = NULL;
}