Blackfin: drop board resources for dead devices (pbx/ad9960)

[pandora-kernel.git] / arch / blackfin / mach-bf518 / boards / ezbrd.c

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 4c594e6..03e4a99 100644 (file)
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-       .ctl_reg        = 0x4, /* send zero */
-       .enable_dma     = 0,
-       .bits_per_word  = 8,
-       .cs_change_per_word = 1,
-};
-#endif
-
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
        .enable_dma = 0,
@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .mode = SPI_MODE_3,
        },
 #endif
-#if defined(CONFIG_PBX)
-       {
-               .modalias = "fxs-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J11_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-       {
-               .modalias = "fxo-spi",
-               .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-               .bus_num = 0,
-               .chip_select = 8 - CONFIG_J19_JUMPER,
-               .controller_data = &spi_si3xxx_chip_info,
-               .mode = SPI_MODE_3,
-       },
-#endif
 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
        {
                .modalias               = "ad7877",