*/
#ifdef CONFIG_BFIN_ICACHE
printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+ printk(KERN_INFO " External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
+# endif
+ " in instruction cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
+# endif
+ " in instruction cache\n");
+
+#else
+ printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
#endif
+
#ifdef CONFIG_BFIN_DCACHE
- printk(KERN_INFO "Data Cache Enabled for CPU%u"
-# if defined CONFIG_BFIN_WB
- " (write-back)"
-# elif defined CONFIG_BFIN_WT
- " (write-through)"
+ printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+ printk(KERN_INFO " External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
+# endif
+ " in data cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
# endif
- "\n", cpu);
+ " in data cache\n");
+#else
+ printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
#endif
}
struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
cpudata->idle = current;
- cpudata->loops_per_jiffy = loops_per_jiffy;
cpudata->imemctl = bfin_read_IMEM_CONTROL();
cpudata->dmemctl = bfin_read_DMEM_CONTROL();
}
bfin_memmap.map[i].addr + bfin_memmap.map[i].size);
switch (bfin_memmap.map[i].type) {
case BFIN_MEMMAP_RAM:
- printk("(usable)\n");
- break;
+ printk(KERN_CONT "(usable)\n");
+ break;
case BFIN_MEMMAP_RESERVED:
- printk("(reserved)\n");
- break;
- default: printk("type %lu\n", bfin_memmap.map[i].type);
- break;
+ printk(KERN_CONT "(reserved)\n");
+ break;
+ default:
+ printk(KERN_CONT "type %lu\n", bfin_memmap.map[i].type);
+ break;
}
}
}
} else if (!memcmp(to, "clkin_hz=", 9)) {
to += 9;
early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
+#endif
} else if (!memcmp(to, "memmap=", 7)) {
to += 7;
parse_memmap(to);
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
# endif /* ANOMALY_05000263 */
# endif /* CONFIG_ROMFS_FS */
- memory_end -= mtd_size;
-
- if (mtd_size == 0) {
- console_init();
- panic("Don't boot kernel without rootfs attached.");
+ /* Since the default MTD_UCLINUX has no magic number, we just blindly
+ * read 8 past the end of the kernel's image, and look at it.
+ * When no image is attached, mtd_size is set to a random number
+ * Do some basic sanity checks before operating on things
+ */
+ if (mtd_size == 0 || memory_end <= mtd_size) {
+ pr_emerg("Could not find valid ram mtd attached.\n");
+ } else {
+ memory_end -= mtd_size;
+
+ /* Relocate MTD image to the top of memory after the uncached memory area */
+ uclinux_ram_map.phys = memory_mtd_start = memory_end;
+ uclinux_ram_map.size = mtd_size;
+ pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+ _end, mtd_size, (void *)memory_mtd_start);
+ dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
}
-
- /* Relocate MTD image to the top of memory after the uncached memory area */
- uclinux_ram_map.phys = memory_mtd_start = memory_end;
- uclinux_ram_map.size = mtd_size;
- dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20);
printk(KERN_INFO "Memory map:\n"
- KERN_INFO " fixedcode = 0x%p-0x%p\n"
- KERN_INFO " text = 0x%p-0x%p\n"
- KERN_INFO " rodata = 0x%p-0x%p\n"
- KERN_INFO " bss = 0x%p-0x%p\n"
- KERN_INFO " data = 0x%p-0x%p\n"
- KERN_INFO " stack = 0x%p-0x%p\n"
- KERN_INFO " init = 0x%p-0x%p\n"
- KERN_INFO " available = 0x%p-0x%p\n"
+ " fixedcode = 0x%p-0x%p\n"
+ " text = 0x%p-0x%p\n"
+ " rodata = 0x%p-0x%p\n"
+ " bss = 0x%p-0x%p\n"
+ " data = 0x%p-0x%p\n"
+ " stack = 0x%p-0x%p\n"
+ " init = 0x%p-0x%p\n"
+ " available = 0x%p-0x%p\n"
#ifdef CONFIG_MTD_UCLINUX
- KERN_INFO " rootfs = 0x%p-0x%p\n"
+ " rootfs = 0x%p-0x%p\n"
#endif
#if DMA_UNCACHED_REGION > 0
- KERN_INFO " DMA Zone = 0x%p-0x%p\n"
+ " DMA Zone = 0x%p-0x%p\n"
#endif
, (void *)FIXED_CODE_START, (void *)FIXED_CODE_END,
_stext, _etext,
{
unsigned long sclk, cclk;
+ /* Check to make sure we are running on the right processor */
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = get_mem_size() * 1024 * 1024;
-
memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+ /* If the user does not specify things on the command line, use
+ * what the bootloader set things up as
+ */
+ physical_mem_end = 0;
parse_cmdline_early(&command_line[0]);
+ if (_ramend == 0)
+ _ramend = get_mem_size() * 1024 * 1024;
+
if (physical_mem_end == 0)
physical_mem_end = _ramend;
#endif
printk(KERN_INFO "Hardware Trace ");
if (bfin_read_TBUFCTL() & 0x1)
- printk("Active ");
+ printk(KERN_CONT "Active ");
else
- printk("Off ");
+ printk(KERN_CONT "Off ");
if (bfin_read_TBUFCTL() & 0x2)
- printk("and Enabled\n");
+ printk(KERN_CONT "and Enabled\n");
else
- printk("and Disabled\n");
-
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
- /* we need to initialize the Flashrom device here since we might
- * do things with flash early on in the boot
- */
- flash_probe();
-#endif
+ printk(KERN_CONT "and Disabled\n");
printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
- _bfin_swrst = bfin_read_SYSCR();
+ /* Clear boot mode field */
+ _bfin_swrst = bfin_read_SYSCR() & ~0xf;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
- if (unlikely(CPUID != bfin_cpuid()))
- printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
- CPU, bfin_cpuid(), bfin_revid());
- else {
+ if (likely(CPUID == bfin_cpuid())) {
if (bfin_revid() != bfin_compiled_revid()) {
if (bfin_compiled_revid() == -1)
printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
CPU, bfin_revid());
}
- /* We can't run on BF548-0.1 due to ANOMALY 05000448 */
- if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
- panic("You can't run on this processor due to 05000448");
-
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
- (cpudata->loops_per_jiffy * HZ) / 500000,
- ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
- (cpudata->loops_per_jiffy * HZ));
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
/* Check Cache configutation */
switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
- icache_size, dcache_size,
-#if defined CONFIG_BFIN_WB
- "-wb"
-#elif defined CONFIG_BFIN_WT
- "-wt"
-#endif
- "", 0);
-
+ "%d KB(L1 dcache) %d KB(L2 cache)\n",
+ icache_size, dcache_size, 0);
seq_printf(m, "%s\n", cache);
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
if (icache_size)
seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
if (cpu_num != num_possible_cpus() - 1)
return 0;
- if (L2_LENGTH)
+ if (L2_LENGTH) {
seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
+ }
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
git.openpandora.org / pandora-kernel.git / blobdiff