ARM: OMAP: move debug_card_init() function

[pandora-kernel.git] / arch / arm / plat-omap / include / plat / board.h

diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index e62f20a..d92f1b5 100644 (file)
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -10,129 +10,4 @@
 #ifndef _OMAP_BOARD_H
 #define _OMAP_BOARD_H
 
-#include <linux/types.h>
-
-#include <plat/gpio-switch.h>
-
-/*
- * OMAP35x EVM revision
- * Run time detection of EVM revision is done by reading Ethernet
- * PHY ID -
- *     GEN_1   = 0x01150000
- *     GEN_2   = 0x92200000
- */
-enum {
-       OMAP3EVM_BOARD_GEN_1 = 0,       /* EVM Rev between  A - D */
-       OMAP3EVM_BOARD_GEN_2,           /* EVM Rev >= Rev E */
-};
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK         0x4f01
-#define OMAP_TAG_GPIO_SWITCH   0x4f06
-#define OMAP_TAG_STI_CONSOLE   0x4f09
-#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART    0x4f81
-#define OMAP_TAG_VERSION_STR   0x4f82
-
-struct omap_clock_config {
-       /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-       u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
-       u8 console_uart;
-       u32 console_speed;
-};
-
-struct omap_sti_console_config {
-       unsigned enable:1;
-       u8 channel;
-};
-
-struct omap_camera_sensor_config {
-       u16 reset_gpio;
-       int (*power_on)(void * data);
-       int (*power_off)(void * data);
-};
-
-struct omap_lcd_config {
-       char panel_name[16];
-       char ctrl_name[16];
-       s16  nreset_gpio;
-       u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-       int default_intensity;
-       int (*set_power)(struct device *dev, int state);
-};
-
-struct omap_fbmem_config {
-       u32 start;
-       u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-       const char *name;
-       int intensity_timer;
-       int blink_timer;
-       void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-struct omap_uart_config {
-       /* Bit field of UARTs present; bit 0 --> UART1 */
-       unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-       char part_table[0];
-};
-
-struct omap_boot_reason_config {
-       char reason_str[12];
-};
-
-struct omap_version_config {
-       char component[12];
-       char version[12];
-};
-
-struct omap_board_config_entry {
-       u16 tag;
-       u16 len;
-       u8  data[0];
-};
-
-struct omap_board_config_kernel {
-       u16 tag;
-       const void *data;
-};
-
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-       ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-       ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-/* OMAP3EVM revision */
-#if defined(CONFIG_MACH_OMAP3EVM)
-u8 get_omap3_evm_rev(void);
-#else
-#define get_omap3_evm_rev() (-EINVAL)
-#endif
 #endif