Merge git://git.infradead.org/battery-2.6

[pandora-kernel.git] / arch / arm / mach-ux500 / board-mop500.c

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index af91374..bb26f40 100644 (file)
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
                .irq            = NOMADIK_GPIO_TO_IRQ(217),
                .platform_data  = &mop500_tc35892_data,
        },
-};
-
-/* I2C0 devices only available prior to HREFv60 */
-static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+       /* I2C0 devices only available prior to HREFv60 */
        {
                I2C_BOARD_INFO("tps61052", 0x33),
                .platform_data  = &mop500_tps61052_data,
        },
 };
 
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
        {
                /* lp5521 LED driver, 1st device */
@@ -205,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
        },
 };
 
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)   \
 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
        /*                              \
         * slave data setup time, which is      \
@@ -220,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \
        .rft            = _rft,         \
        /* std. mode operation */       \
        .clk_freq       = clk,          \
+       /* Slave response timeout(ms) */\
+       .timeout        = t_out,        \
        .sm             = _sm,          \
 }
 
 /*
  * The board uses 4 i2c controllers, initialize all of
  * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
+ * Tx & Rx FIFO threshold values as 8 and standard
  * mode of operation
  */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(2,        0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(3,        0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2,        0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3,        0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
 static void __init mop500_i2c_init(void)
 {
@@ -425,6 +426,8 @@ static void __init mop500_uart_init(void)
 
 static void __init mop500_init_machine(void)
 {
+       int i2c0_devs;
+
        /*
         * The HREFv60 board removed a GPIO expander and routed
         * all these GPIO pins to the internal GPIO controller
@@ -448,11 +451,11 @@ static void __init mop500_init_machine(void)
 
        platform_device_register(&ab8500_device);
 
-       i2c_register_board_info(0, mop500_i2c0_devices,
-                               ARRAY_SIZE(mop500_i2c0_devices));
-       if (!machine_is_hrefv60())
-               i2c_register_board_info(0, mop500_i2c0_old_devices,
-                                       ARRAY_SIZE(mop500_i2c0_old_devices));
+       i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+       if (machine_is_hrefv60())
+               i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+       i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
        i2c_register_board_info(2, mop500_i2c2_devices,
                                ARRAY_SIZE(mop500_i2c2_devices));
 }