*/
#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <asm/hardware/cache-l2x0.h>
#include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
#include <plat/s5pv310.h>
#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+#include <plat/pd.h>
#include <mach/map.h>
},
};
+static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK0(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S5PV310_GPK2(2),
+ .ext_cd_gpio_invert = 1,
+ .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkv310_smsc911x_resources[] = {
+ [0] = {
+ .start = S5PV310_PA_SROM_BANK(1),
+ .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT(5),
+ .end = IRQ_EINT(5),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkv310_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
+ .resource = smdkv310_smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc9215_config,
+ },
+};
+
+static struct i2c_board_info i2c_devs1[] __initdata = {
+ {I2C_BOARD_INFO("wm8994", 0x1a),},
+};
+
+static struct platform_device *smdkv310_devices[] __initdata = {
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &s3c_device_hsmmc3,
+ &s3c_device_i2c1,
+ &s3c_device_rtc,
+ &s3c_device_wdt,
+ &s5pv310_device_ac97,
+ &s5pv310_device_i2s0,
+ &s5pv310_device_pd[PD_MFC],
+ &s5pv310_device_pd[PD_G3D],
+ &s5pv310_device_pd[PD_LCD0],
+ &s5pv310_device_pd[PD_LCD1],
+ &s5pv310_device_pd[PD_CAM],
+ &s5pv310_device_pd[PD_TV],
+ &s5pv310_device_pd[PD_GPS],
+ &s5pv310_device_sysmmu,
+ &samsung_asoc_dma,
+ &smdkv310_smsc911x,
+};
+
+static void __init smdkv310_smsc911x_init(void)
+{
+ u32 cs1;
+
+ /* configure nCS1 width to 16 bits */
+ cs1 = __raw_readl(S5P_SROM_BW) &
+ ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
+ cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
+ (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
+ (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
+ S5P_SROM_BW__NCS1__SHIFT;
+ __raw_writel(cs1, S5P_SROM_BW);
+
+ /* set timing for nCS1 suitable for ethernet chip */
+ __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
+ (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
+ (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
+ (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
+ (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
+}
+
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
static void __init smdkv310_machine_init(void)
{
-#ifdef CONFIG_CACHE_L2X0
- l2x0_init(S5P_VA_L2CC, 1 << 28, 0xffffffff);
-#endif
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ smdkv310_smsc911x_init();
+
+ s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
+ s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
+
+ platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
MACHINE_START(SMDKV310, "SMDKV310")