#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
.dev.platform_data = &smartq_usb_otg_vbus_pdata,
};
-static int __init smartq_bl_init(struct device *dev)
+static int smartq_bl_init(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
.max_width = 4,
- /*.broken_card_detection = true,*/
+ .cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
},
};
+static int __init smartq_lcd_setup_gpio(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+ if (ret < 0)
+ return ret;
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPM(3), 0);
+
+ return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+ .sck = S3C64XX_GPM(1),
+ .mosi = S3C64XX_GPM(2),
+ .miso = S3C64XX_GPM(2),
+};
+
+static struct platform_device smartq_lcd_control_device = {
+ .name = "spi-gpio",
+ .id = 1,
+ .dev.platform_data = &smartq_lcd_control,
+};
+
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
gpio_direction_output(S3C64XX_GPM(3), power);
.dev.platform_data = &smartq_lcd_power_data,
};
+static struct i2c_board_info smartq_i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8987", 0x1a), },
+};
static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_timer[1],
&s3c_device_ts,
&s3c_device_usb_hsotg,
+ &s3c64xx_device_iis0,
&smartq_backlight_device,
+ &smartq_lcd_control_device,
&smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev,
};
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
-
pm_power_off = smartq_power_off;
return ret;
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ i2c_register_board_info(0, smartq_i2c_devs,
+ ARRAY_SIZE(smartq_i2c_devs));
+
+ WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init());