/* USB device UDC support */
-static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
-{
- pr_debug("udc: pullup(%d)\n", cmd);
-
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE :
- gpio_set_value(S3C2410_GPC(5), 1);
- break;
- case S3C2410_UDC_P_DISABLE :
- gpio_set_value(S3C2410_GPC(5), 0);
- break;
- case S3C2410_UDC_P_RESET :
- break;
- default:
- break;
- }
-}
-
static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
- .udc_command = mini2440_udc_pullup,
+ .pullup_pin = S3C2410_GPC(5),
};
s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
- /* Make sure the D+ pullup pin is output */
- WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
- gpio_direction_output(S3C2410_GPC(5), 0);
-
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);