#include <linux/mfd/pcf50633/pmic.h>
#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <plat/udc.h>
#include <plat/gpio-cfg.h>
#include <plat/iic.h>
+#include <plat/ts.h>
+
static struct pcf50633 *gta02_pcf;
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
.apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_DOWN1] = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.apply_uV = 1,
.always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_HCLDO] = {
.min_uV = 2000000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
},
},
[PCF50633_REGULATOR_LDO1] = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
- .state_mem = {
- .enabled = 0,
- },
},
},
[PCF50633_REGULATOR_LDO2] = {
.min_uV = 3200000,
.max_uV = 3200000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
},
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
- .state_mem = {
- .enabled = 1,
- },
},
},
[PCF50633_REGULATOR_LDO6] = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .state_mem = {
- .enabled = 1,
- },
},
},
};
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
- switch (cmd) {
- case S3C2410_UDC_P_ENABLE:
- pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
- break;
- case S3C2410_UDC_P_DISABLE:
- pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
- break;
- case S3C2410_UDC_P_RESET:
- pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
- /* FIXME: Do something here. */
- }
-}
-
/* Get PMU to set USB current limit accordingly. */
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = {
.vbus_draw = gta02_udc_vbus_draw,
- .udc_command = gta02_udc_command,
-
+ .pullup_pin = GTA02_GPIO_USB_PULLUP,
};
/* USB */
},
};
+/* Touchscreen */
+static struct s3c2410_ts_mach_info gta02_ts_info = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .oversampling_shift = 2,
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_buttons_pdata,
+ },
+};
static void __init gta02_map_io(void)
{
>a02_nor_flash,
&s3c24xx_pwm_device,
&s3c_device_iis,
+ &samsung_asoc_dma,
&s3c_device_i2c0,
+ >a02_buttons_device,
+ &s3c_device_adc,
+ &s3c_device_ts,
};
/* These guys DO need to be children of PMU. */
#endif
s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c24xx_ts_set_platdata(>a02_ts_info);
s3c_ohci_set_platdata(>a02_usb_info);
s3c_nand_set_platdata(>a02_nand_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
pm_power_off = gta02_poweroff;
+
+ regulator_has_full_constraints();
}