Pull acpi-debug into release branch
[pandora-kernel.git] / arch / arm / mach-s3c2440 / mach-anubis.c
index 53675aa..29c163d 100644 (file)
@@ -158,6 +158,29 @@ static struct mtd_partition anubis_default_nand_part[] = {
        }
 };
 
+static struct mtd_partition anubis_default_nand_part_large[] = {
+       [0] = {
+               .name   = "Boot Agent",
+               .size   = SZ_128K,
+               .offset = 0,
+       },
+       [1] = {
+               .name   = "/boot",
+               .size   = SZ_4M - SZ_128K,
+               .offset = SZ_128K,
+       },
+       [2] = {
+               .name   = "user1",
+               .offset = SZ_4M,
+               .size   = SZ_32M - SZ_4M,
+       },
+       [3] = {
+               .name   = "user2",
+               .offset = SZ_32M,
+               .size   = MTDPART_SIZ_FULL,
+       }
+};
+
 /* the Anubis has 3 selectable slots for nand-flash, the two
  * on-board chip areas, as well as the external slot.
  *
@@ -409,8 +432,17 @@ static void __init anubis_map_io(void)
        s3c24xx_init_clocks(0);
        s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 
-       /* ensure that the GPIO is setup */
-       s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+       /* check for the newer revision boards with large page nand */
+
+       if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+               printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+                      __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+               anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+               anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+       } else {
+               /* ensure that the GPIO is setup */
+               s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+       }
 }
 
 static void __init anubis_init(void)