#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/sysdev.h>
+#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/dm9000.h>
+#include <linux/ucb1400.h>
+#include <linux/ata_platform.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
+#include <mach/audio.h>
#include <mach/vpac270.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
+
+#include <plat/i2c.h>
#include "generic.h"
#include "devices.h"
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
+
+ /* PCMCIA */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO85_nPCE_1,
+ GPIO54_nPCE_2,
+ GPIO55_nPREG,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+ GPIO104_PSKTSEL,
+ GPIO84_GPIO, /* PCMCIA CD */
+ GPIO35_GPIO, /* PCMCIA RDY */
+ GPIO107_GPIO, /* PCMCIA PPEN */
+ GPIO11_GPIO, /* PCMCIA RESET */
+ GPIO17_GPIO, /* CF CD */
+ GPIO12_GPIO, /* CF RDY */
+ GPIO16_GPIO, /* CF RESET */
+
+ /* UHC */
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+ GPIO119_USBH2_PWR,
+ GPIO120_USBH2_PEN,
+
+ /* UDC */
+ GPIO41_GPIO,
+
+ /* Ethernet */
+ GPIO114_GPIO, /* IRQ */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
+ GPIO98_AC97_SYSCLK,
+ GPIO113_GPIO, /* TS IRQ */
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* IDE */
+ GPIO36_GPIO, /* IDE IRQ */
+ GPIO80_DREQ_1,
};
/******************************************************************************
* NOR Flash
******************************************************************************/
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
-static struct mtd_partition vpac270_partitions[] = {
+static struct mtd_partition vpac270_nor_partitions[] = {
{
.name = "Flash",
.offset = 0x00000000,
static struct physmap_flash_data vpac270_flash_data[] = {
{
.width = 2, /* bankwidth in bytes */
- .parts = vpac270_partitions,
- .nr_parts = ARRAY_SIZE(vpac270_partitions)
+ .parts = vpac270_nor_partitions,
+ .nr_parts = ARRAY_SIZE(vpac270_nor_partitions)
}
};
static inline void vpac270_nor_init(void) {}
#endif
+/******************************************************************************
+ * OneNAND Flash
+ ******************************************************************************/
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition vpac270_onenand_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct onenand_platform_data vpac270_onenand_info = {
+ .parts = vpac270_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(vpac270_onenand_partitions),
+};
+
+static struct resource vpac270_onenand_resources[] = {
+ [0] = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device vpac270_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .resource = vpac270_onenand_resources,
+ .num_resources = ARRAY_SIZE(vpac270_onenand_resources),
+ .dev = {
+ .platform_data = &vpac270_onenand_info,
+ },
+};
+
+static void __init vpac270_onenand_init(void)
+{
+ platform_device_register(&vpac270_onenand);
+}
+#else
+static void __init vpac270_onenand_init(void) {}
+#endif
+
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO53_VPAC270_SD_DETECT_N,
.gpio_card_ro = GPIO52_VPAC270_SD_READONLY,
- .detect_delay = 20,
+ .detect_delay_ms = 200,
};
static void __init vpac270_mmc_init(void)
static inline void vpac270_leds_init(void) {}
#endif
+/******************************************************************************
+ * USB Host
+ ******************************************************************************/
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int vpac270_ohci_init(struct device *dev)
+{
+ UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
+ return 0;
+}
+
+static struct pxaohci_platform_data vpac270_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 |
+ POWER_CONTROL_LOW | POWER_SENSE_LOW,
+ .init = vpac270_ohci_init,
+};
+
+static void __init vpac270_uhc_init(void)
+{
+ pxa_set_ohci_info(&vpac270_ohci_info);
+}
+#else
+static inline void vpac270_uhc_init(void) {}
+#endif
+
+/******************************************************************************
+ * USB Gadget
+ ******************************************************************************/
+#if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
+static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
+ .gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
+ .gpio_pullup = -1,
+};
+
+static struct platform_device vpac270_gpio_vbus = {
+ .name = "gpio-vbus",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_gpio_vbus_info,
+ },
+};
+
+static void vpac270_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR = UP2OCR_HXOE;
+}
+
+static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
+ .udc_command = vpac270_udc_command,
+ .gpio_pullup = -1,
+};
+
+static void __init vpac270_udc_init(void)
+{
+ pxa_set_udc_info(&vpac270_udc_info);
+ platform_device_register(&vpac270_gpio_vbus);
+}
+#else
+static inline void vpac270_udc_init(void) {}
+#endif
+
+/******************************************************************************
+ * Ethernet
+ ******************************************************************************/
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource vpac270_dm9000_resources[] = {
+ [0] = {
+ .start = PXA_CS2_PHYS + 0x300,
+ .end = PXA_CS2_PHYS + 0x303,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_CS2_PHYS + 0x304,
+ .end = PXA_CS2_PHYS + 0x343,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+ .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct dm9000_plat_data vpac270_dm9000_platdata = {
+ .flags = DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device vpac270_dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(vpac270_dm9000_resources),
+ .resource = vpac270_dm9000_resources,
+ .dev = {
+ .platform_data = &vpac270_dm9000_platdata,
+ }
+};
+
+static void __init vpac270_eth_init(void)
+{
+ platform_device_register(&vpac270_dm9000_device);
+}
+#else
+static inline void vpac270_eth_init(void) {}
+#endif
+
+/******************************************************************************
+ * Audio and Touchscreen
+ ******************************************************************************/
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct ucb1400_pdata vpac270_ucb1400_pdata = {
+ .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+};
+
+static struct platform_device vpac270_ucb1400_device = {
+ .name = "ucb1400_core",
+ .id = -1,
+ .dev = {
+ .platform_data = &vpac270_ucb1400_pdata,
+ },
+};
+
+static void __init vpac270_ts_init(void)
+{
+ pxa_set_ac97_info(&vpac270_ac97_pdata);
+ platform_device_register(&vpac270_ucb1400_device);
+}
+#else
+static inline void vpac270_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata vpac270_i2c_devs[] = {
+ {
+ I2C_BOARD_INFO("ds1339", 0x68),
+ },
+};
+
+static void __init vpac270_rtc_init(void)
+{
+ pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(vpac270_i2c_devs));
+}
+#else
+static inline void vpac270_rtc_init(void) {}
+#endif
+
/******************************************************************************
* Framebuffer
******************************************************************************/
static inline void vpac270_lcd_init(void) {}
#endif
+/******************************************************************************
+ * PATA IDE
+ ******************************************************************************/
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+static struct pata_platform_info vpac270_pata_pdata = {
+ .ioport_shift = 1,
+ .irq_flags = IRQF_TRIGGER_RISING,
+};
+
+static struct resource vpac270_ide_resources[] = {
+ [0] = { /* I/O Base address */
+ .start = PXA_CS3_PHYS + 0x120,
+ .end = PXA_CS3_PHYS + 0x13f,
+ .flags = IORESOURCE_MEM
+ },
+ [1] = { /* CTL Base address */
+ .start = PXA_CS3_PHYS + 0x15c,
+ .end = PXA_CS3_PHYS + 0x15f,
+ .flags = IORESOURCE_MEM
+ },
+ [2] = { /* IDE IRQ pin */
+ .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device vpac270_ide_device = {
+ .name = "pata_platform",
+ .num_resources = ARRAY_SIZE(vpac270_ide_resources),
+ .resource = vpac270_ide_resources,
+ .dev = {
+ .platform_data = &vpac270_pata_pdata,
+ }
+};
+
+static void __init vpac270_ide_init(void)
+{
+ platform_device_register(&vpac270_ide_device);
+}
+#else
+static inline void vpac270_ide_init(void) {}
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
vpac270_lcd_init();
vpac270_mmc_init();
vpac270_nor_init();
+ vpac270_onenand_init();
vpac270_leds_init();
vpac270_keys_init();
+ vpac270_uhc_init();
+ vpac270_udc_init();
+ vpac270_eth_init();
+ vpac270_ts_init();
+ vpac270_rtc_init();
+ vpac270_ide_init();
}
MACHINE_START(VPAC270, "Voipac PXA270")