#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
-#include <mach/mfp-pxa25x.h>
-#include <mach/hardware.h>
+#include <mach/pxa25x.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
#include "generic.h"
-
-static unsigned long e740_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO79_nCS_3, /* CS3 - IMAGEON */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* PC Card */
- GPIO8_GPIO, /* CD0 */
- GPIO44_GPIO, /* CD1 */
- GPIO11_GPIO, /* IRQ0 */
- GPIO6_GPIO, /* IRQ1 */
- GPIO27_GPIO, /* RST0 */
- GPIO24_GPIO, /* RST1 */
- GPIO20_GPIO, /* PWR0 */
- GPIO23_GPIO, /* PWR1 */
- GPIO48_nPOE,
- GPIO49_nPWE,
- GPIO50_nPIOR,
- GPIO51_nPIOW,
- GPIO52_nPCE_1,
- GPIO53_nPCE_2,
- GPIO54_nPSKTSEL,
- GPIO55_nPREG,
- GPIO56_nPWAIT,
- GPIO57_nIOIS16,
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-static unsigned long e400_pin_config[] __initdata = {
- /* Chip selects */
- GPIO15_nCS_1, /* CS1 - Flash */
- GPIO80_nCS_4, /* CS4 - TMIO */
-
- /* Clocks */
- GPIO12_32KHz,
-
- /* BTUART */
- GPIO42_BTUART_RXD,
- GPIO43_BTUART_TXD,
- GPIO44_BTUART_CTS,
- GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
-
- /* wakeup */
- GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
+#include "clock.h"
/* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
+void __init eseries_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
mi->nr_banks=1;
mi->bank[0].size = (64*1024*1024);
}
-static void __init e740_init(void)
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+ .gpio_vbus = GPIO_E7XX_USB_DISC,
+ .gpio_pullup = GPIO_E7XX_USB_PULLUP,
+ .gpio_pullup_inverted = 1
+};
+
+static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
+{
+ if (mode & IR_OFF) {
+ gpio_set_value(GPIO_E7XX_IR_OFF, 1);
+ pxa2xx_transceiver_mode(dev, mode);
+ } else {
+ pxa2xx_transceiver_mode(dev, mode);
+ gpio_set_value(GPIO_E7XX_IR_OFF, 0);
+ }
+}
+
+int e7xx_irda_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
+ if (ret)
+ goto out;
+
+ ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
+ if (ret)
+ goto out;
+
+ e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
+out:
+ return ret;
+}
+
+static void e7xx_irda_shutdown(struct device *dev)
+{
+ e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+ gpio_free(GPIO_E7XX_IR_OFF);
+}
+
+struct pxaficp_platform_data e7xx_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = e7xx_irda_transceiver_mode,
+ .shutdown = e7xx_irda_shutdown,
+};
+
+int eseries_tmio_enable(struct platform_device *dev)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ /* Reset - bring SUSPEND high before PCLR */
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+ msleep(1);
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+ msleep(1);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 1);
+ msleep(1);
+ return 0;
}
-static void __init e400_init(void)
+int eseries_tmio_disable(struct platform_device *dev)
{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0);
+ return 0;
}
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E350
-MACHINE_START(E350, "Toshiba e350")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e740_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .init_machine = e400_init,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
-MACHINE_END
-#endif
+int eseries_tmio_suspend(struct platform_device *dev)
+{
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ return 0;
+}
+
+int eseries_tmio_resume(struct platform_device *dev)
+{
+ gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 1);
+ msleep(1);
+ return 0;
+}
+
+void eseries_get_tmio_gpios(void)
+{
+ gpio_request(GPIO_ESERIES_TMIO_SUSPEND, NULL);
+ gpio_request(GPIO_ESERIES_TMIO_PCLR, NULL);
+ gpio_direction_output(GPIO_ESERIES_TMIO_SUSPEND, 0);
+ gpio_direction_output(GPIO_ESERIES_TMIO_PCLR, 0);
+}
+
+/* TMIO controller uses the same resources on all e-series machines. */
+struct resource eseries_tmio_resources[] = {
+ [0] = {
+ .start = PXA_CS4_PHYS,
+ .end = PXA_CS4_PHYS + 0x1fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+ .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* Some e-series hardware cannot control the 32K clock */
+static void clk_32k_dummy(struct clk *clk)
+{
+}
+
+static const struct clkops clk_32k_dummy_ops = {
+ .enable = clk_32k_dummy,
+ .disable = clk_32k_dummy,
+};
+
+static struct clk tmio_dummy_clk = {
+ .ops = &clk_32k_dummy_ops,
+ .rate = 32768,
+};
+
+static struct clk_lookup eseries_clkregs[] = {
+ INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"),
+};
+
+void eseries_register_clks(void)
+{
+ clks_register(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
+}