[ARM] pxa: rename colibri.c to colibri-pxa270.c

[pandora-kernel.git] / arch / arm / mach-pxa / colibri-pxa270.c

diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
new file mode 100644 (file)
index 0000000..01bcfaa
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -0,0 +1,145 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri-pxa270.c
+ *
+ *  Support for Toradex PXA270 based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * GPIO configuration
+ */
+static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
+       GPIO78_nCS_2,   /* Ethernet CS */
+       GPIO114_GPIO,   /* Ethernet IRQ */
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+       {
+               .name =         "Bootloader",
+               .offset =       0x00000000,
+               .size =         0x00040000,
+               .mask_flags =   MTD_WRITEABLE  /* force read-only */
+       }, {
+               .name =         "Kernel",
+               .offset =       0x00040000,
+               .size =         0x00400000,
+               .mask_flags =   0
+       }, {
+               .name =         "Rootfs",
+               .offset =       0x00440000,
+               .size =         MTDPART_SIZ_FULL,
+               .mask_flags =   0
+       }
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+       {
+               .width          = 4,                    /* bankwidth in bytes */
+               .parts          = colibri_partitions,
+               .nr_parts       = ARRAY_SIZE(colibri_partitions)
+       }
+};
+
+static struct resource colibri_pxa270_flash_resource = {
+       .start  = PXA_CS0_PHYS,
+       .end    = PXA_CS0_PHYS + SZ_32M - 1,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device colibri_pxa270_flash_device = {
+       .name   = "physmap-flash",
+       .id     = 0,
+       .dev    = {
+               .platform_data = colibri_flash_data,
+       },
+       .resource = &colibri_pxa270_flash_resource,
+       .num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+#if defined(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+       [0] = {
+               .start  = COLIBRI_PXA270_ETH_PHYS,
+               .end    = COLIBRI_PXA270_ETH_PHYS + 3,
+               .flags  = IORESOURCE_MEM,
+       },
+       [1] = {
+               .start  = COLIBRI_PXA270_ETH_PHYS + 4,
+               .end    = COLIBRI_PXA270_ETH_PHYS + 4 + 500,
+               .flags  = IORESOURCE_MEM,
+       },
+       [2] = {
+               .start  = COLIBRI_PXA270_ETH_IRQ,
+               .end    = COLIBRI_PXA270_ETH_IRQ,
+               .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+       },
+};
+
+static struct platform_device dm9000_device = {
+       .name           = "dm9000",
+       .id             = -1,
+       .num_resources  = ARRAY_SIZE(dm9000_resources),
+       .resource       = dm9000_resources,
+};
+#endif /* CONFIG_DM9000 */
+
+static struct platform_device *colibri_pxa270_devices[] __initdata = {
+       &colibri_pxa270_flash_device,
+#if defined(CONFIG_DM9000)
+       &dm9000_device,
+#endif
+};
+
+static void __init colibri_pxa270_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+       platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = COLIBRI_SDRAM_BASE + 0x100,
+       .init_machine   = colibri_pxa270_init,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa27x_init_irq,
+       .timer          = &pxa_timer,
+MACHINE_END
+