config CPU_PXA320
bool "PXA320 (codename Monahans-P)"
+config CPU_PXA930
+ bool "PXA930 (codename Tavor-P)"
+
endmenu
endif
-choice
- prompt "Select target board"
-
config ARCH_GUMSTIX
bool "Gumstix XScale boards"
help
Say Y here if you intend to run this kernel on a
Gumstix Full Function Minature Computer.
+config MACH_GUMSTIX_F
+ bool "Basix, Connex, ws-200ax, ws-400ax systems"
+ depends on ARCH_GUMSTIX
+ select PXA25x
+
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
select PXA27x
+ select HAVE_PWM
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform"
select PXA27x
+ select HAVE_PWM
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
+config MACH_POODLE
+ bool "Enable Sharp SL-5600 (Poodle) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select SHARP_LOCOMO
+ select PXA_SSP
+
+config MACH_CORGI
+ bool "Enable Sharp SL-C700 (Corgi) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+ bool "Enable Sharp SL-C750 (Shepherd) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+ bool "Enable Sharp SL-C760 (Husky) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+ select PXA_SHARP_C7xx
+
+config MACH_AKITA
+ bool "Enable Sharp SL-1000 (Akita) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+ select MACH_SPITZ
+ select I2C
+ select I2C_PXA
+
+config MACH_SPITZ
+ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+ bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+ depends on PXA_SHARPSL
+ select PXA27x
+ select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+ bool "Enable Sharp SL-6000x (Tosa) Support"
+ depends on PXA_SHARPSL
+ select PXA25x
+
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
+config MACH_E350
+ bool "Toshiba e350"
+ default y
+ depends on ARCH_PXA_ESERIES
+ help
+ Say Y here if you intend to run this kernel on a Toshiba
+ e350 family PDA.
+
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
+ select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
+config MACH_TRIZEPS4_CONXS
+ bool "ConXS Eval Board"
+ depends on MACH_TRIZEPS4
+
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
select PXA27x
config MACH_ZYLONITE
- bool "PXA3xx Development Platform"
+ bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
+ select HAVE_PWM
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select PXA3xx
+ select PXA930
+
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select PXA3xx
+ select PXA930
+
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- depends on ARCH_PXA
select PXA27x
select IWMMXT
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
+ select PXA_SSP
-endchoice
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+ select HAVE_PWM
-choice
- prompt "Used baseboard"
- depends on MACH_PCM027
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
-
-endchoice
-
-if PXA_SHARPSL
+ select HAVE_PWM
+ depends on MACH_PCM027
choice
- prompt "Select target Sharp Zaurus device range"
-
-config PXA_SHARPSL_25x
- bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
- select PXA25x
-
-config PXA_SHARPSL_27x
- bool "Sharp PXA270 models (SL-Cxx00)"
- select PXA27x
-
-endchoice
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
-endif
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
-if ARCH_GUMSTIX
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
-choice
- prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
- bool "Basix, Connex, ws-200ax, ws-400ax systems"
- select PXA25x
+config PCM990_DISPLAY_NONE
+ bool "no display"
endchoice
-endif
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
-choice
- prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
-config MACH_TRIZEPS4_CONXS
- bool "ConXS Eval Board"
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
-config MACH_TRIZEPS4_ANY
- bool "another Board"
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
-endchoice
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
-endif
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
endmenu
-config MACH_POODLE
- bool "Enable Sharp SL-5600 (Poodle) Support"
- depends on PXA_SHARPSL_25x
- select SHARP_LOCOMO
- select PXA_SSP
-
-config MACH_CORGI
- bool "Enable Sharp SL-C700 (Corgi) Support"
- depends on PXA_SHARPSL_25x
- select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
- bool "Enable Sharp SL-C750 (Shepherd) Support"
- depends on PXA_SHARPSL_25x
- select PXA_SHARP_C7xx
-
-config MACH_HUSKY
- bool "Enable Sharp SL-C760 (Husky) Support"
- depends on PXA_SHARPSL_25x
- select PXA_SHARP_C7xx
-
-config MACH_AKITA
- bool "Enable Sharp SL-1000 (Akita) Support"
- depends on PXA_SHARPSL_27x
- select PXA_SHARP_Cxx00
- select MACH_SPITZ
- select I2C
- select I2C_PXA
-
-config MACH_SPITZ
- bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
- depends on PXA_SHARPSL_27x
- select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
- bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
- depends on PXA_SHARPSL_27x
- select PXA_SHARP_Cxx00
-
-config MACH_TOSA
- bool "Enable Sharp SL-6000x (Tosa) Support"
- depends on PXA_SHARPSL_25x
-
config PXA25x
bool
help
tristate
help
Enable support for PXA2xx SSP ports
+
+config PXA_PWM
+ tristate
+ default BACKLIGHT_PWM
+ help
+ Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+ tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+ depends on MACH_TOSA
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on tosa.
+
endif
git.openpandora.org / pandora-kernel.git / blobdiff