#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "hsmmc.h"
#include "control.h"
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
&wl1271_device,
};
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
}
/* Using generic display panel */
-static struct panel_generic_dpi_data omap4_dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data omap4_dvi_panel = {
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
+ .i2c_bus_num = 3,
};
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
static void omap4_panda_hdmi_mux_init(void)
{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
}
static struct gpio panda_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
+static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
omap4_panda_hdmi_mux_init();
omap_display_init(&omap4_panda_dss_data);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
-static void __init omap4_panda_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap4_panda_map_io,
- .init_early = omap4_panda_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,