mfd: Convert twl6040 to i2c driver, and separate it from twl core

[pandora-kernel.git] / arch / arm / mach-omap2 / board-omap4panda.c

diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89..1b782ba 100644 (file)
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
        return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
        /* single-step ramp for headset and handsfree */
        .hs_left_step   = 0x0f,
        .hs_right_step  = 0x0f,
@@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
        .hf_right_step  = 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
        .codec          = &twl6040_codec,
        .audpwron_gpio  = 127,
-       .naudint_irq    = OMAP44XX_IRQ_SYS_2N,
        .irq_base       = TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-       .audio          = &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
                        TWL_COMMON_REGULATOR_VCXIO |
                        TWL_COMMON_REGULATOR_VUSB |
                        TWL_COMMON_REGULATOR_CLK32KG);
-       omap4_pmic_init("twl6030", &omap4_panda_twldata);
+       omap4_pmic_init("twl6030", &omap4_panda_twldata,
+                       &twl6040_data, OMAP44XX_IRQ_SYS_2N);
        omap_register_i2c_bus(2, 400, NULL, 0);
        /*
         * Bus 3 is attached to the DVI port where devices like the pico DLP