#include <plat/common.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
-#include <video/omap-panel-generic-dpi.h>
+#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
dvi_enabled = 0;
}
-static struct panel_generic_dpi_data dvi_panel = {
- .name = "generic",
+static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "generic_dpi_panel",
+ .driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
.setup = omap3evm_twl_gpio_setup,
};
-static struct twl4030_usb_data omap3evm_usb_data = {
- .usb_mode = T2_USB_MODE_ULPI,
-};
-
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
.rep = 1,
};
-static struct twl4030_madc_platform_data omap3evm_madc_data = {
- .irq_line = 1,
-};
-
-static struct twl4030_codec_audio_data omap3evm_audio_data;
-
-static struct twl4030_codec_data omap3evm_codec_data = {
- .audio_mclk = 26000000,
- .audio = &omap3evm_audio_data,
-};
-
-static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = {
- REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
-};
-
-/* VDAC for DSS driving S-Video */
-static struct regulator_init_data omap3_evm_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply),
- .consumer_supplies = omap3_evm_vdda_dac_supply,
-};
-
-/* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
- REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
- REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
-};
-
-static struct regulator_init_data omap3_evm_vpll2 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
- .consumer_supplies = omap3_evm_vpll2_supplies,
-};
-
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
#endif
static struct twl4030_platform_data omap3evm_twldata = {
- .irq_base = TWL4030_IRQ_BASE,
- .irq_end = TWL4030_IRQ_END,
-
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
- .madc = &omap3evm_madc_data,
- .usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
- .codec = &omap3evm_codec_data,
- .vdac = &omap3_evm_vdac,
- .vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
static int __init omap3_evm_i2c_init(void)
{
+ omap3_pmic_get_config(&omap3evm_twldata,
+ TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
+ TWL_COMMON_PDATA_AUDIO,
+ TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
+
+ omap3evm_twldata.vdac->constraints.apply_uV = true;
+ omap3evm_twldata.vpll2->constraints.apply_uV = true;
+
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
- .init_irq = omap_init_irq,
+ .init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
- .timer = &omap_timer,
+ .timer = &omap3_timer,
MACHINE_END