Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

[pandora-kernel.git] / arch / arm / mach-omap2 / board-omap3evm.c

diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 3de8d9b..38a2d91 100644 (file)
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@
 #include <plat/common.h>
 #include <plat/mcspi.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -301,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
        dvi_enabled = 0;
 }
 
+static struct panel_generic_dpi_data dvi_panel = {
+       .name                   = "generic",
+       .platform_enable        = omap3_evm_enable_dvi,
+       .platform_disable       = omap3_evm_disable_dvi,
+};
+
 static struct omap_dss_device omap3_evm_dvi_device = {
        .name                   = "dvi",
-       .driver_name            = "generic_panel",
        .type                   = OMAP_DISPLAY_TYPE_DPI,
+       .driver_name            = "generic_dpi_panel",
+       .data                   = &dvi_panel,
        .phy.dpi.data_lines     = 24,
-       .platform_enable        = omap3_evm_enable_dvi,
-       .platform_disable       = omap3_evm_disable_dvi,
 };
 
 static struct omap_dss_device *omap3_evm_dss_devices[] = {
@@ -632,11 +638,11 @@ static struct platform_device *omap3_evm_devices[] __initdata = {
        &omap3_evm_dss_device,
 };
 
-static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+static struct usbhs_omap_board_data usbhs_bdata __initdata = {
 
-       .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
-       .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
-       .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+       .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+       .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
        .phy_reset  = true,
        /* PHY reset GPIO will be runtime programmed based on EVM version */
@@ -694,7 +700,7 @@ static void __init omap3_evm_init(void)
 
                /* setup EHCI phy reset config */
                omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
-               ehci_pdata.reset_gpio_port[1] = 21;
+               usbhs_bdata.reset_gpio_port[1] = 21;
 
                /* EVM REV >= E can supply 500mA with EXTVBUS programming */
                musb_board_data.power = 500;
@@ -702,10 +708,10 @@ static void __init omap3_evm_init(void)
        } else {
                /* setup EHCI phy reset on MDC */
                omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
-               ehci_pdata.reset_gpio_port[1] = 135;
+               usbhs_bdata.reset_gpio_port[1] = 135;
        }
        usb_musb_init(&musb_board_data);
-       usb_ehci_init(&ehci_pdata);
+       usbhs_init(&usbhs_bdata);
        ads7846_dev_init();
        omap3evm_init_smsc911x();
        omap3_evm_display_init();