#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
#include <linux/wl12xx.h>
#include "mux.h"
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
-#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
+#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
+#define HDMI_GPIO_HPD 63 /* Hotplug detect */
+#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO 40
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
-static struct omap_device_pad keypad_pads[] __initdata = {
+static struct omap_device_pad keypad_pads[] = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
return status;
}
-static struct platform_device sdp4430_lcd_device = {
- .name = "sdp4430_lcd",
- .id = -1,
-};
-
static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
};
static struct platform_device *sdp4430_devices[] __initdata = {
- &sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
&sdp4430_vbat,
};
-static struct omap_lcd_config sdp4430_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel sdp4430_config[] __initdata = {
- { OMAP_TAG_LCD, &sdp4430_lcd_config },
-};
-
-static void __init omap_4430sdp_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
static void sdp4430_hdmi_mux_init(void)
{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",
}
static struct gpio sdp4430_hdmi_gpios[] = {
- { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
+ { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
+ { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
- gpio_free(HDMI_GPIO_LS_OE);
- gpio_free(HDMI_GPIO_HPD);
+ gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
}
-static struct omap_dss_device sdp4430_hdmi_device = {
- .name = "hdmi",
- .driver_name = "hdmi_panel",
- .type = OMAP_DISPLAY_TYPE_HDMI,
- .clocks = {
- .dispc = {
+static struct nokia_dsi_panel_data dsi1_panel = {
+ .name = "taal",
+ .reset_gpio = 102,
+ .use_ext_te = false,
+ .ext_te_gpio = 101,
+ .esd_interval = 0,
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+ .name = "lcd",
+ .driver_name = "taal",
+ .type = OMAP_DISPLAY_TYPE_DSI,
+ .data = &dsi1_panel,
+ .phy.dsi = {
+ .clk_lane = 1,
+ .clk_pol = 0,
+ .data1_lane = 2,
+ .data1_pol = 0,
+ .data2_lane = 3,
+ .data2_pol = 0,
+
+ .module = 0,
+ },
+
+ .clocks = {
+ .dispc = {
+ .channel = {
+ /* Logic Clock = 172.8 MHz */
+ .lck_div = 1,
+ /* Pixel Clock = 34.56 MHz */
+ .pck_div = 5,
+ .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
+ },
.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
},
- .hdmi = {
- .regn = 15,
- .regm2 = 1,
+
+ .dsi = {
+ .regn = 16, /* Fint = 2.4 MHz */
+ .regm = 180, /* DDR Clock = 216 MHz */
+ .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
+ .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
+
+ .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
+ .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
},
},
+ .channel = OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+ .name = "taal",
+ .reset_gpio = 104,
+ .use_ext_te = false,
+ .ext_te_gpio = 103,
+ .esd_interval = 0,
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+ .name = "lcd2",
+ .driver_name = "taal",
+ .type = OMAP_DISPLAY_TYPE_DSI,
+ .data = &dsi2_panel,
+ .phy.dsi = {
+ .clk_lane = 1,
+ .clk_pol = 0,
+ .data1_lane = 2,
+ .data1_pol = 0,
+ .data2_lane = 3,
+ .data2_pol = 0,
+
+ .module = 1,
+ },
+
+ .clocks = {
+ .dispc = {
+ .channel = {
+ /* Logic Clock = 172.8 MHz */
+ .lck_div = 1,
+ /* Pixel Clock = 34.56 MHz */
+ .pck_div = 5,
+ .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
+ },
+ .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
+ },
+
+ .dsi = {
+ .regn = 16, /* Fint = 2.4 MHz */
+ .regm = 180, /* DDR Clock = 216 MHz */
+ .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
+ .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
+
+ .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
+ .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
+ },
+ },
+ .channel = OMAP_DSS_CHANNEL_LCD2,
+};
+
+static void sdp4430_lcd_init(void)
+{
+ int r;
+
+ r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
+ "lcd1_reset_gpio");
+ if (r)
+ pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
+
+ r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
+ "lcd2_reset_gpio");
+ if (r)
+ pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
+}
+
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+ .hpd_gpio = HDMI_GPIO_HPD,
+};
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+ .name = "hdmi",
+ .driver_name = "hdmi_panel",
+ .type = OMAP_DISPLAY_TYPE_HDMI,
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
+ .data = &sdp4430_hdmi_data,
+};
+
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+ .picodlp_adapter_id = 2,
+ .emu_done_gpio = 44,
+ .pwrgood_gpio = 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+ int r;
+ const struct gpio picodlp_gpios[] = {
+ {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON"},
+ {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+ "DLP EMU DONE"},
+ {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+ "DLP PWRGOOD"},
+ };
+
+ r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+ if (r)
+ pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DISPLAY_SEL_GPIO, 0);
+ gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+ return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(DLP_POWER_ON_GPIO, 0);
+ gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+ .name = "picodlp",
+ .driver_name = "picodlp_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .channel = OMAP_DSS_CHANNEL_LCD2,
+ .platform_enable = sdp4430_panel_enable_picodlp,
+ .platform_disable = sdp4430_panel_disable_picodlp,
+ .data = &sdp4430_picodlp_pdata,
};
static struct omap_dss_device *sdp4430_dss_devices[] = {
+ &sdp4430_lcd_device,
+ &sdp4430_lcd2_device,
&sdp4430_hdmi_device,
+ &sdp4430_picodlp_device,
};
static struct omap_dss_board_info sdp4430_dss_data = {
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
.devices = sdp4430_dss_devices,
- .default_device = &sdp4430_hdmi_device,
+ .default_device = &sdp4430_lcd_device,
};
-void omap_4430sdp_display_init(void)
+static void omap_4430sdp_display_init(void)
{
+ int r;
+
+ /* Enable LCD2 by default (instead of Pico DLP) */
+ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+ "display_sel");
+ if (r)
+ pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+ sdp4430_lcd_init();
sdp4430_hdmi_mux_init();
+ sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
+
+ omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
#ifdef CONFIG_OMAP_MUX
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
- omap_board_config = sdp4430_config;
- omap_board_config_size = ARRAY_SIZE(sdp4430_config);
-
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
+ omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
omap_4430sdp_display_init();
}
-static void __init omap_4430sdp_map_io(void)
-{
- omap2_set_globals_443x();
- omap44xx_map_common_io();
-}
-
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
- .map_io = omap_4430sdp_map_io,
- .init_early = omap_4430sdp_init_early,
+ .map_io = omap4_map_io,
+ .init_early = omap4430_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,