* (at your option) any later version.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
-
-static void omap_nop_release(struct device *dev)
-{
- /* Nothing */
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define OMAP_I2C_BASE 0xfffb3800
-
-static struct resource i2c_resources[] = {
- {
- .start = OMAP_I2C_BASE,
- .end = OMAP_I2C_BASE + 0x3f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_I2C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device = {
- .name = "i2c_omap",
- .id = -1,
- .dev = {
- .release = omap_nop_release,
- },
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-static void omap_init_i2c(void)
-{
- /* FIXME define and use a boot tag, in case of boards that
- * either don't wire up I2C, or chips that mux it differently...
- * it can include clocking and address info, maybe more.
- */
- omap_cfg_reg(I2C_SCL);
- omap_cfg_reg(I2C_SDA);
-
- (void) platform_device_register(&omap_i2c_device);
-}
-#else
-static inline void omap_init_i2c(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE)
static u64 irda_dmamask = 0xffffffff;
.name = "omap1610-ir",
.id = -1,
.dev = {
- .release = omap_nop_release,
.dma_mask = &irda_dmamask,
},
};
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-#define OMAP_MMC1_BASE 0xfffb7800
-#define OMAP_MMC2_BASE 0xfffb7c00 /* omap16xx only */
-
-static struct omap_mmc_conf mmc1_conf;
-
-static u64 mmc1_dmamask = 0xffffffff;
-
-static struct resource mmc1_resources[] = {
- {
- .start = IO_ADDRESS(OMAP_MMC1_BASE),
- .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_MMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mmc_omap_device1 = {
- .name = "mmci-omap",
- .id = 1,
- .dev = {
- .release = omap_nop_release,
- .dma_mask = &mmc1_dmamask,
- .platform_data = &mmc1_conf,
- },
- .num_resources = ARRAY_SIZE(mmc1_resources),
- .resource = mmc1_resources,
-};
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-static struct omap_mmc_conf mmc2_conf;
-
-static u64 mmc2_dmamask = 0xffffffff;
-
-static struct resource mmc2_resources[] = {
- {
- .start = IO_ADDRESS(OMAP_MMC2_BASE),
- .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = INT_1610_MMC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mmc_omap_device2 = {
- .name = "mmci-omap",
- .id = 2,
- .dev = {
- .release = omap_nop_release,
- .dma_mask = &mmc2_dmamask,
- .platform_data = &mmc2_conf,
- },
- .num_resources = ARRAY_SIZE(mmc2_resources),
- .resource = mmc2_resources,
-};
-#endif
-
-static void __init omap_init_mmc(void)
-{
- const struct omap_mmc_config *mmc_conf;
- const struct omap_mmc_conf *mmc;
-
- /* NOTE: assumes MMC was never (wrongly) enabled */
- mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
- if (!mmc_conf)
- return;
-
- /* block 1 is always available and has just one pinout option */
- mmc = &mmc_conf->mmc[0];
- if (mmc->enabled) {
- omap_cfg_reg(MMC_CMD);
- omap_cfg_reg(MMC_CLK);
- omap_cfg_reg(MMC_DAT0);
- if (cpu_is_omap1710()) {
- omap_cfg_reg(M15_1710_MMC_CLKI);
- omap_cfg_reg(P19_1710_MMC_CMDDIR);
- omap_cfg_reg(P20_1710_MMC_DATDIR0);
- }
- if (mmc->wire4) {
- omap_cfg_reg(MMC_DAT1);
- /* NOTE: DAT2 can be on W10 (here) or M15 */
- if (!mmc->nomux)
- omap_cfg_reg(MMC_DAT2);
- omap_cfg_reg(MMC_DAT3);
- }
- mmc1_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device1);
- }
-
-#ifdef CONFIG_ARCH_OMAP16XX
- /* block 2 is on newer chips, and has many pinout options */
- mmc = &mmc_conf->mmc[1];
- if (mmc->enabled) {
- if (!mmc->nomux) {
- omap_cfg_reg(Y8_1610_MMC2_CMD);
- omap_cfg_reg(Y10_1610_MMC2_CLK);
- omap_cfg_reg(R18_1610_MMC2_CLKIN);
- omap_cfg_reg(W8_1610_MMC2_DAT0);
- if (mmc->wire4) {
- omap_cfg_reg(V8_1610_MMC2_DAT1);
- omap_cfg_reg(W15_1610_MMC2_DAT2);
- omap_cfg_reg(R10_1610_MMC2_DAT3);
- }
-
- /* These are needed for the level shifter */
- omap_cfg_reg(V9_1610_MMC2_CMDDIR);
- omap_cfg_reg(V5_1610_MMC2_DATDIR0);
- omap_cfg_reg(W19_1610_MMC2_DATDIR1);
- }
-
- /* Feedback clock must be set on OMAP-1710 MMC2 */
- if (cpu_is_omap1710())
- omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
- MOD_CONF_CTRL_1);
- mmc2_conf = *mmc;
- (void) platform_device_register(&mmc_omap_device2);
- }
-#endif
- return;
-}
-#else
-static inline void omap_init_mmc(void) {}
-#endif
-
#if defined(CONFIG_OMAP_RTC) || defined(CONFIG_OMAP_RTC)
#define OMAP_RTC_BASE 0xfffb4800
static struct platform_device omap_rtc_device = {
.name = "omap_rtc",
.id = -1,
- .dev = {
- .release = omap_nop_release,
- },
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static inline void omap_init_rtc(void) {}
#endif
-/*-------------------------------------------------------------------------*/
+#if defined(CONFIG_OMAP_STI)
-#if defined(CONFIG_OMAP16XX_WATCHDOG) || defined(CONFIG_OMAP16XX_WATCHDOG_MODULE)
+#define OMAP1_STI_BASE IO_ADDRESS(0xfffea000)
+#define OMAP1_STI_CHANNEL_BASE (OMAP1_STI_BASE + 0x400)
-#define OMAP_WDT_BASE 0xfffeb000
-
-static struct resource wdt_resources[] = {
+static struct resource sti_resources[] = {
{
- .start = OMAP_WDT_BASE,
- .end = OMAP_WDT_BASE + 0x4f,
+ .start = OMAP1_STI_BASE,
+ .end = OMAP1_STI_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
+ {
+ .start = OMAP1_STI_CHANNEL_BASE,
+ .end = OMAP1_STI_CHANNEL_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_1610_STI,
+ .flags = IORESOURCE_IRQ,
+ }
};
-static struct platform_device omap_wdt_device = {
- .name = "omap1610_wdt",
- .id = -1,
- .dev = {
- .release = omap_nop_release,
- },
- .num_resources = ARRAY_SIZE(wdt_resources),
- .resource = wdt_resources,
+static struct platform_device sti_device = {
+ .name = "sti",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(sti_resources),
+ .resource = sti_resources,
};
-static void omap_init_wdt(void)
+static inline void omap_init_sti(void)
{
- (void) platform_device_register(&omap_wdt_device);
+ platform_device_register(&sti_device);
}
#else
-static inline void omap_init_wdt(void) {}
+static inline void omap_init_sti(void) {}
#endif
-
/*-------------------------------------------------------------------------*/
/*
* may be handled by the boot loader, and drivers should expect it will
* normally have been done by the time they're probed.
*/
-static int __init omap_init_devices(void)
+static int __init omap1_init_devices(void)
{
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
- omap_init_i2c();
omap_init_irda();
- omap_init_mmc();
omap_init_rtc();
- omap_init_wdt();
+ omap_init_sti();
return 0;
}
-arch_initcall(omap_init_devices);
+arch_initcall(omap1_init_devices);
git.openpandora.org / pandora-kernel.git / blobdiff