Merge master.kernel.org:/home/rmk/linux-2.6-arm

[pandora-kernel.git] / arch / arm / mach-omap1 / board-perseus2.c

diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 2133173..bd900b7 100644 (file)
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -24,10 +24,12 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/tc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board.h>
 
 static struct resource smc91x_resources[] = {
        [0] = {
@@ -42,8 +44,6 @@ static struct resource smc91x_resources[] = {
        },
 };
 
-static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
-
 static struct mtd_partition p2_partitions[] = {
        /* bootloader (U-Boot, etc) in first sector */
        {
@@ -83,8 +83,8 @@ static struct flash_platform_data p2_flash_data = {
 };
 
 static struct resource p2_flash_resource = {
-       .start          = OMAP_FLASH_0_START,
-       .end            = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+       .start          = OMAP_CS0_PHYS,
+       .end            = OMAP_CS0_PHYS + SZ_32M - 1,
        .flags          = IORESOURCE_MEM,
 };
 
@@ -110,9 +110,27 @@ static struct platform_device *devices[] __initdata = {
        &smc91x_device,
 };
 
+static struct omap_uart_config perseus2_uart_config __initdata = {
+       .enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+       .panel_name     = "p2",
+       .ctrl_name      = "internal",
+};
+
+static struct omap_board_config_kernel perseus2_config[] = {
+       { OMAP_TAG_UART,        &perseus2_uart_config },
+       { OMAP_TAG_LCD,         &perseus2_lcd_config },
+};
+
 static void __init omap_perseus2_init(void)
 {
        (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+       omap_board_config = perseus2_config;
+       omap_board_config_size = ARRAY_SIZE(perseus2_config);
+       omap_serial_init();
 }
 
 static void __init perseus2_init_smc91x(void)
@@ -130,11 +148,14 @@ void omap_perseus2_init_irq(void)
        omap_gpio_init();
        perseus2_init_smc91x();
 }
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
-       {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
-        MT_DEVICE},
+       {
+               .virtual        = H2P2_DBG_FPGA_BASE,
+               .pfn            = __phys_to_pfn(H2P2_DBG_FPGA_START),
+               .length         = H2P2_DBG_FPGA_SIZE,
+               .type           = MT_DEVICE
+       }
 };
 
 static void __init omap_perseus2_map_io(void)
@@ -174,7 +195,6 @@ static void __init omap_perseus2_map_io(void)
         * It is used as the Ethernet controller interrupt
         */
        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-       omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")