arm: mxs: mx28evk: add fixed regulators for audio

[pandora-kernel.git] / arch / arm / mach-mxs / mach-mx28evk.c

diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 521c4d5..8e810a5 100644 (file)
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -19,6 +19,8 @@
 #include <linux/irq.h>
 #include <linux/clk.h>
 #include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -377,6 +379,44 @@ static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
        },
 };
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+       REGULATOR_SUPPLY("VDDA", "0-000a"),
+       REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+       .constraints    = {
+               .name   = "3V3",
+               .always_on = 1,
+       },
+       .consumer_supplies = mx28evk_audio_consumer_supplies,
+       .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+       .supply_name    = "board-3V3",
+       .microvolts     = 3300000,
+       .gpio           = -EINVAL,
+       .enabled_at_boot = 1,
+       .init_data      = &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+       .name           = "reg-fixed-voltage",
+       .id             = -1,
+       .num_resources  = 0,
+       .dev            = {
+               .platform_data  = &mx28evk_vdd_pdata,
+       },
+};
+static void __init mx28evk_add_regulators(void)
+{
+       platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
 static void __init mx28evk_init(void)
 {
        int ret;
@@ -424,6 +464,8 @@ static void __init mx28evk_init(void)
        i2c_register_board_info(0, mxs_i2c0_board_info,
                                ARRAY_SIZE(mxs_i2c0_board_info));
 
+       mx28evk_add_regulators();
+
        mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
                        NULL, 0);