#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst.h>
#include <mach/cm.h>
#include <mach/lm.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include "common.h"
+#include <plat/timer-sp.h>
#define INTCP_PA_FLASH_BASE 0x24000000
#define INTCP_FLASH_SIZE SZ_32M
/*
* Clock handling
*/
-#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
-#define CM_AUXOSC IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x1c)
+#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
static const struct icst_params cp_auxvco_params = {
.ref = 24000000,
{
u32 val;
- val = readl(CM_AUXOSC) & ~0x7ffff;
+ val = readl(clk->vcoreg) & ~0x7ffff;
val |= vco.v | (vco.r << 9) | (vco.s << 16);
writel(0xa05f, CM_LOCK);
- writel(val, CM_AUXOSC);
+ writel(val, clk->vcoreg);
writel(0, CM_LOCK);
}
+static const struct clk_ops cp_auxclk_ops = {
+ .round = icst_clk_round,
+ .set = icst_clk_set,
+ .setvco = cp_auxvco_set,
+};
+
static struct clk cp_auxclk = {
+ .ops = &cp_auxclk_ops,
.params = &cp_auxvco_params,
- .setvco = cp_auxvco_set,
+ .vcoreg = CM_AUXOSC,
};
static struct clk_lookup cp_lookups[] = {
}
}
-#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static void __init intcp_timer_init(void)
{
- integrator_time_init(1000, TIMER_CTRL_IE);
+ writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+ writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+ sp804_clocksource_init(TIMER2_VA_BASE);
+ sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
}
static struct sys_timer cp_timer = {