#include <mach/iomux-mx27.h>
#include <asm/mach/time.h>
#include <mach/audmux.h>
-#include <mach/ssi.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
#include <mach/mmc.h>
#define SPI1_SS1 (GPIO_PORTD + 27)
#define SD2_CD (GPIO_PORTC + 29)
-static int pca100_pins[] = {
+static const int pca100_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
.platform_data = &board_eeprom,
}, {
- I2C_BOARD_INFO("rtc-pcf8563", 0x51),
- .type = "pcf8563"
+ I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("lm75", 0x4a),
- .type = "lm75"
}
};
msleep(2);
}
-static struct imx_ssi_platform_data pca100_ssi_pdata = {
+static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = {
.ac97_reset = pca100_ac97_cold_reset,
.ac97_warm_reset = pca100_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
- mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+ imx27_add_imx_ssi(0, &pca100_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
i2c_register_board_info(1, pca100_i2c_devices,
ARRAY_SIZE(pca100_i2c_devices));
- imx27_add_i2c_imx1(&pca100_i2c1_data);
+ imx27_add_imx_i2c(1, &pca100_i2c1_data);
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif