ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
[pandora-kernel.git] / arch / arm / mach-imx / mach-mx27ads.c
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
new file mode 100644 (file)
index 0000000..2183e3d
--- /dev/null
@@ -0,0 +1,373 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xf4300000
+#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
+               (PBC_BASE_ADDRESS + (offset))
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_LCDON        0x0800 /* Enable the LCD */
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+static unsigned int mx27ads_pins[] = {
+       /* UART0 */
+       PE12_PF_UART1_TXD,
+       PE13_PF_UART1_RXD,
+       PE14_PF_UART1_CTS,
+       PE15_PF_UART1_RTS,
+       /* UART1 */
+       PE3_PF_UART2_CTS,
+       PE4_PF_UART2_RTS,
+       PE6_PF_UART2_TXD,
+       PE7_PF_UART2_RXD,
+       /* UART2 */
+       PE8_PF_UART3_TXD,
+       PE9_PF_UART3_RXD,
+       PE10_PF_UART3_CTS,
+       PE11_PF_UART3_RTS,
+       /* UART3 */
+       PB26_AF_UART4_RTS,
+       PB28_AF_UART4_TXD,
+       PB29_AF_UART4_CTS,
+       PB31_AF_UART4_RXD,
+       /* UART4 */
+       PB18_AF_UART5_TXD,
+       PB19_AF_UART5_RXD,
+       PB20_AF_UART5_CTS,
+       PB21_AF_UART5_RTS,
+       /* UART5 */
+       PB10_AF_UART6_TXD,
+       PB12_AF_UART6_CTS,
+       PB11_AF_UART6_RXD,
+       PB13_AF_UART6_RTS,
+       /* FEC */
+       PD0_AIN_FEC_TXD0,
+       PD1_AIN_FEC_TXD1,
+       PD2_AIN_FEC_TXD2,
+       PD3_AIN_FEC_TXD3,
+       PD4_AOUT_FEC_RX_ER,
+       PD5_AOUT_FEC_RXD1,
+       PD6_AOUT_FEC_RXD2,
+       PD7_AOUT_FEC_RXD3,
+       PD8_AF_FEC_MDIO,
+       PD9_AIN_FEC_MDC,
+       PD10_AOUT_FEC_CRS,
+       PD11_AOUT_FEC_TX_CLK,
+       PD12_AOUT_FEC_RXD0,
+       PD13_AOUT_FEC_RX_DV,
+       PD14_AOUT_FEC_RX_CLK,
+       PD15_AOUT_FEC_COL,
+       PD16_AIN_FEC_TX_ER,
+       PF23_AIN_FEC_TX_EN,
+       /* I2C2 */
+       PC5_PF_I2C2_SDA,
+       PC6_PF_I2C2_SCL,
+       /* FB */
+       PA5_PF_LSCLK,
+       PA6_PF_LD0,
+       PA7_PF_LD1,
+       PA8_PF_LD2,
+       PA9_PF_LD3,
+       PA10_PF_LD4,
+       PA11_PF_LD5,
+       PA12_PF_LD6,
+       PA13_PF_LD7,
+       PA14_PF_LD8,
+       PA15_PF_LD9,
+       PA16_PF_LD10,
+       PA17_PF_LD11,
+       PA18_PF_LD12,
+       PA19_PF_LD13,
+       PA20_PF_LD14,
+       PA21_PF_LD15,
+       PA22_PF_LD16,
+       PA23_PF_LD17,
+       PA24_PF_REV,
+       PA25_PF_CLS,
+       PA26_PF_PS,
+       PA27_PF_SPL_SPR,
+       PA28_PF_HSYNC,
+       PA29_PF_VSYNC,
+       PA30_PF_CONTRAST,
+       PA31_PF_OE_ACD,
+       /* OWIRE */
+       PE16_AF_OWIRE,
+       /* SDHC1*/
+       PE18_PF_SD1_D0,
+       PE19_PF_SD1_D1,
+       PE20_PF_SD1_D2,
+       PE21_PF_SD1_D3,
+       PE22_PF_SD1_CMD,
+       PE23_PF_SD1_CLK,
+       /* SDHC2*/
+       PB4_PF_SD2_D0,
+       PB5_PF_SD2_D1,
+       PB6_PF_SD2_D2,
+       PB7_PF_SD2_D3,
+       PB8_PF_SD2_CMD,
+       PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+       .width = 1,
+       .hw_ecc = 1,
+};
+
+/* ADS's NOR flash */
+static struct physmap_flash_data mx27ads_flash_data = {
+       .width = 2,
+};
+
+static struct resource mx27ads_flash_resource = {
+       .start = 0xc0000000,
+       .end = 0xc0000000 + 0x02000000 - 1,
+       .flags = IORESOURCE_MEM,
+
+};
+
+static struct platform_device mx27ads_nor_mtd_device = {
+       .name = "physmap-flash",
+       .id = 0,
+       .dev = {
+               .platform_data = &mx27ads_flash_data,
+       },
+       .num_resources = 1,
+       .resource = &mx27ads_flash_resource,
+};
+
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+       .bitrate = 100000,
+};
+
+static struct i2c_board_info mx27ads_i2c_devices[] = {
+};
+
+void lcd_power(int on)
+{
+       if (on)
+               __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+       else
+               __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+}
+
+static struct imx_fb_videomode mx27ads_modes[] = {
+       {
+               .mode = {
+                       .name           = "Sharp-LQ035Q7",
+                       .refresh        = 60,
+                       .xres           = 240,
+                       .yres           = 320,
+                       .pixclock       = 188679, /* in ps (5.3MHz) */
+                       .hsync_len      = 1,
+                       .left_margin    = 9,
+                       .right_margin   = 16,
+                       .vsync_len      = 1,
+                       .upper_margin   = 7,
+                       .lower_margin   = 9,
+               },
+               .bpp            = 16,
+               .pcr            = 0xFB008BC0,
+       },
+};
+
+static struct imx_fb_platform_data mx27ads_fb_data = {
+       .mode = mx27ads_modes,
+       .num_modes = ARRAY_SIZE(mx27ads_modes),
+
+       /*
+        * - HSYNC active high
+        * - VSYNC active high
+        * - clk notenabled while idle
+        * - clock inverted
+        * - data not inverted
+        * - data enable low active
+        * - enable sharp mode
+        */
+       .pwmr           = 0x00A903FF,
+       .lscr1          = 0x00120300,
+       .dmacr          = 0x00020010,
+
+       .lcd_power      = lcd_power,
+};
+
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+                             void *data)
+{
+       return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+                          "sdhc1-card-detect", data);
+}
+
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+                             void *data)
+{
+       return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+                          "sdhc2-card-detect", data);
+}
+
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
+{
+       free_irq(IRQ_GPIOE(21), data);
+}
+
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
+{
+       free_irq(IRQ_GPIOB(7), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+       .init = mx27ads_sdhc1_init,
+       .exit = mx27ads_sdhc1_exit,
+};
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+       .init = mx27ads_sdhc2_init,
+       .exit = mx27ads_sdhc2_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+       &mx27ads_nor_mtd_device,
+       &mxc_fec_device,
+       &mxc_w1_master_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+       {
+               .flags = IMXUART_HAVE_RTSCTS,
+       }, {
+               .flags = IMXUART_HAVE_RTSCTS,
+       }, {
+               .flags = IMXUART_HAVE_RTSCTS,
+       }, {
+               .flags = IMXUART_HAVE_RTSCTS,
+       }, {
+               .flags = IMXUART_HAVE_RTSCTS,
+       }, {
+               .flags = IMXUART_HAVE_RTSCTS,
+       },
+};
+
+static void __init mx27ads_board_init(void)
+{
+       mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+                       "mx27ads");
+
+       mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+       mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+       mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+       mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+       mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+       mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+       mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
+
+       /* only the i2c master 1 is used on this CPU card */
+       i2c_register_board_info(1, mx27ads_i2c_devices,
+                               ARRAY_SIZE(mx27ads_i2c_devices));
+       mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+       mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+       mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+       mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+
+       platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27ads_timer_init(void)
+{
+       unsigned long fref = 26000000;
+
+       if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+               fref = 27000000;
+
+       mx27_clocks_init(fref);
+}
+
+static struct sys_timer mx27ads_timer = {
+       .init   = mx27ads_timer_init,
+};
+
+static struct map_desc mx27ads_io_desc[] __initdata = {
+       {
+               .virtual = PBC_BASE_ADDRESS,
+               .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
+               .length = SZ_1M,
+               .type = MT_DEVICE,
+       },
+};
+
+static void __init mx27ads_map_io(void)
+{
+       mx27_map_io();
+       iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
+}
+
+MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
+       /* maintainer: Freescale Semiconductor, Inc. */
+       .phys_io        = MX27_AIPI_BASE_ADDR,
+       .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+       .boot_params    = MX27_PHYS_OFFSET + 0x100,
+       .map_io         = mx27ads_map_io,
+       .init_irq       = mx27_init_irq,
+       .init_machine   = mx27ads_board_init,
+       .timer          = &mx27ads_timer,
+MACHINE_END