#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/ulpi.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
#include "devices-imx27.h"
#define SD1_EN_GPIO (GPIO_PORTB + 25)
#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
#define SPI2_SS0 (GPIO_PORTD + 21)
+#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PD22_PF_CSPI2_SCLK,
PD23_PF_CSPI2_MISO,
PD24_PF_CSPI2_MOSI,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
return 0;
}
-#if defined(CONFIG_USB_ULPI)
+static int mx27_3ds_otg_init(struct platform_device *pdev)
+{
+ return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
+}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
+ .init = mx27_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
-#endif
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.consumer_supplies = vgen_consumers,
};
-static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
+static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
{
- .id = MC13783_REGU_VMMC1,
+ .id = MC13783_REG_VMMC1,
.init_data = &vmmc1_init,
}, {
- .id = MC13783_REGU_VGEN,
+ .id = MC13783_REG_VGEN,
.init_data = &vgen_init,
},
};
/* MC13783 */
-static struct mc13783_platform_data mc13783_pdata __initdata = {
- .regulators = mx27_3ds_regulators,
- .num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
+static struct mc13xxx_platform_data mc13783_pdata = {
+ .regulators = {
+ .regulators = mx27_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
+
+ },
.flags = MC13783_USE_REGULATOR,
};
},
};
+static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
+ .bitrate = 100000,
+};
static void __init mx27pdk_init(void)
{
imx27_add_mxc_mmc(0, &sdhc1_pdata);
imx27_add_imx2_wdt(NULL);
otg_phy_init();
-#if defined(CONFIG_USB_ULPI)
+
if (otg_mode_host) {
- otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
- ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+ otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+ ULPI_OTG_DRVVBUS_EXT);
- imx27_add_mxc_ehci_otg(&otg_pdata);
+ if (otg_pdata.otg)
+ imx27_add_mxc_ehci_otg(&otg_pdata);
}
-#endif
+
if (!otg_mode_host)
imx27_add_fsl_usb2_udc(&otg_device_pdata);
imx27_add_spi_imx1(&spi2_pdata);
spi_register_board_info(mx27_3ds_spi_devs,
ARRAY_SIZE(mx27_3ds_spi_devs));
+
+ if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+ pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
+ imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
}
static void __init mx27pdk_timer_init(void)
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
- .map_io = mx27_map_io,
- .init_irq = mx27_init_irq,
- .init_machine = mx27pdk_init,
- .timer = &mx27pdk_timer,
+ .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_early = imx27_init_early,
+ .init_irq = mx27_init_irq,
+ .timer = &mx27pdk_timer,
+ .init_machine = mx27pdk_init,
MACHINE_END