#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/etherdevice.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
#include <mach/mux.h>
+#include <mach/spi.h>
#define MITYOMAPL138_PHY_ID "0:03"
static struct factory_config factory_config;
+struct part_no_info {
+ const char *part_no; /* part number string of interest */
+ int max_freq; /* khz */
+};
+
+static struct part_no_info mityomapl138_pn_info[] = {
+ {
+ .part_no = "L138-C",
+ .max_freq = 300000,
+ },
+ {
+ .part_no = "L138-D",
+ .max_freq = 375000,
+ },
+ {
+ .part_no = "L138-F",
+ .max_freq = 456000,
+ },
+ {
+ .part_no = "1808-C",
+ .max_freq = 300000,
+ },
+ {
+ .part_no = "1808-D",
+ .max_freq = 375000,
+ },
+ {
+ .part_no = "1808-F",
+ .max_freq = 456000,
+ },
+ {
+ .part_no = "1810-D",
+ .max_freq = 375000,
+ },
+};
+
+#ifdef CONFIG_CPU_FREQ
+static void mityomapl138_cpufreq_init(const char *partnum)
+{
+ int i, ret;
+
+ for (i = 0; partnum && i < ARRAY_SIZE(mityomapl138_pn_info); i++) {
+ /*
+ * the part number has additional characters beyond what is
+ * stored in the table. This information is not needed for
+ * determining the speed grade, and would require several
+ * more table entries. Only check the first N characters
+ * for a match.
+ */
+ if (!strncmp(partnum, mityomapl138_pn_info[i].part_no,
+ strlen(mityomapl138_pn_info[i].part_no))) {
+ da850_max_speed = mityomapl138_pn_info[i].max_freq;
+ break;
+ }
+ }
+
+ ret = da850_register_cpufreq("pll0_sysclk3");
+ if (ret)
+ pr_warning("cpufreq registration failed: %d\n", ret);
+}
+#else
+static void mityomapl138_cpufreq_init(const char *partnum) { }
+#endif
+
static void read_factory_config(struct memory_accessor *a, void *context)
{
int ret;
+ const char *partnum = NULL;
struct davinci_soc_info *soc_info = &davinci_soc_info;
ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
if (ret != sizeof(struct factory_config)) {
pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
ret);
- return;
+ goto bad_config;
}
if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
factory_config.magic);
- return;
+ goto bad_config;
}
if (factory_config.version != FACTORY_CONFIG_VERSION) {
pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
factory_config.version);
- return;
+ goto bad_config;
}
pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac);
- pr_info("MityOMAPL138: Part Number = %s\n", factory_config.partnum);
if (is_valid_ether_addr(factory_config.mac))
memcpy(soc_info->emac_pdata->mac_addr,
factory_config.mac, ETH_ALEN);
else
pr_warning("MityOMAPL138: Invalid MAC found "
"in factory config block\n");
+
+ partnum = factory_config.partnum;
+ pr_info("MityOMAPL138: Part Number = %s\n", partnum);
+
+bad_config:
+ /* default maximum speed is valid for all platforms */
+ mityomapl138_cpufreq_init(partnum);
}
static struct at24_platform_data mityomapl138_fd_chip = {
ARRAY_SIZE(mityomap_tps65023_info));
}
+/*
+ * SPI Devices:
+ * SPI1_CS0: 8M Flash ST-M25P64-VME6G
+ */
+static struct mtd_partition spi_flash_partitions[] = {
+ [0] = {
+ .name = "ubl",
+ .offset = 0,
+ .size = SZ_64K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "u-boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "u-boot-env",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [3] = {
+ .name = "periph-config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [4] = {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K + SZ_64K,
+ },
+ [5] = {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M + SZ_1M,
+ },
+ [6] = {
+ .name = "fpga",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ },
+ [7] = {
+ .name = "spare",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct flash_platform_data mityomapl138_spi_flash_data = {
+ .name = "m25p80",
+ .parts = spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(spi_flash_partitions),
+ .type = "m24p64",
+};
+
+static struct davinci_spi_config spi_eprom_config = {
+ .io_type = SPI_IO_TYPE_DMA,
+ .c2tdelay = 8,
+ .t2cdelay = 8,
+};
+
+static struct spi_board_info mityomapl138_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &mityomapl138_spi_flash_data,
+ .controller_data = &spi_eprom_config,
+ .mode = SPI_MODE_0,
+ .max_speed_hz = 30000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ },
+};
+
/*
* MityDSP-L138 includes a 256 MByte large-page NAND flash
* (128K blocks).
mityomapl138_setup_nand();
+ ret = da8xx_register_spi(1, mityomapl138_spi_flash_info,
+ ARRAY_SIZE(mityomapl138_spi_flash_info));
+ if (ret)
+ pr_warning("spi 1 registration failed: %d\n", ret);
+
mityomapl138_config_emac();
ret = da8xx_register_rtc();
if (ret)
pr_warning("rtc setup failed: %d\n", ret);
- ret = da850_register_cpufreq("pll0_sysclk3");
- if (ret)
- pr_warning("cpufreq registration failed: %d\n", ret);
-
ret = da8xx_register_cpuidle();
if (ret)
pr_warning("cpuidle registration failed: %d\n", ret);
git.openpandora.org / pandora-kernel.git / blobdiff