Merge branch 'sh/dwarf-unwinder'

[pandora-kernel.git] / arch / arm / mach-davinci / board-dm355-evm.c

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index d6ab64c..77e8067 100644 (file)
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -117,6 +119,8 @@ static struct davinci_i2c_platform_data i2c_pdata = {
        .bus_delay      = 0     /* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data;
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -134,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-       { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+       {       I2C_BOARD_INFO("dm355evm_msp", 0x25),
                .platform_data = dm355evm_mmcsd_gpios,
-               /* plus irq */ },
-       /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-       /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+       },
+       /* { plus irq  }, */
+       { I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 };
 
 static void __init evm_init_i2c(void)
@@ -177,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
        .num_resources  = ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+       .clk_polarity = 0,
+       .hs_polarity = 1,
+       .vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL        (V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+       {
+               .index = 0,
+               .name = "Composite",
+               .type = V4L2_INPUT_TYPE_CAMERA,
+               .std = TVP514X_STD_ALL,
+       },
+       {
+               .index = 1,
+               .name = "S-Video",
+               .type = V4L2_INPUT_TYPE_CAMERA,
+               .std = TVP514X_STD_ALL,
+       },
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+       {
+               .input = INPUT_CVBS_VI2B,
+               .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+       },
+       {
+               .input = INPUT_SVIDEO_VI2C_VI1C,
+               .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+       },
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+       {
+               .name = "tvp5146",
+               .grp_id = 0,
+               .num_inputs = ARRAY_SIZE(tvp5146_inputs),
+               .inputs = tvp5146_inputs,
+               .routes = tvp5146_routes,
+               .can_route = 1,
+               .ccdc_if_params = {
+                       .if_type = VPFE_BT656,
+                       .hdpol = VPFE_PINPOL_POSITIVE,
+                       .vdpol = VPFE_PINPOL_POSITIVE,
+               },
+               .board_info = {
+                       I2C_BOARD_INFO("tvp5146", 0x5d),
+                       .platform_data = &tvp5146_pdata,
+               },
+       }
+};
+
+static struct vpfe_config vpfe_cfg = {
+       .num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+       .sub_devs = vpfe_sub_devs,
+       .card_name = "DM355 EVM",
+       .ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
        &dm355evm_dm9000,
        &davinci_nand_device,
@@ -188,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+       /* setup input configuration for VPFE input devices */
+       dm355_set_vpfe_config(&vpfe_cfg);
        dm355_init();
 }
 
@@ -279,6 +351,9 @@ static __init void dm355_evm_init(void)
 
        dm355_init_spi0(BIT(0), dm355_evm_spi_info,
                        ARRAY_SIZE(dm355_evm_spi_info));
+
+       /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+       dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)